It is possible to restart the lte-softmodem via the FlexRAN controller. For
this to work, the end_configmodule() method needs to be called when shutting
the lte-softmodem down so that the configuration can be read again during a
restart.

The one in lte-enb.c disrupts the realtime. Using a B200mini with
20MHz bandwidth leads to the UE unable to connect for it seesms like
the UL and DL are not properly time synched because of this sleep
of one second that happens after the USRP streaming has started.
We see some random access attempts but the decoded preamble is
wrong.

This may be dependant on the setup. I had sporadic errors with
a B210, where sometimes the UE could connect and sometimes not.

- add function free_td() -> complements init_td() [seems to not be used, added
  for completeness]
- add function free_td8() -> undoes init_td8() [free memory of 8-bit LLR Turbo
  decoder]
- add function free_td16() -> undoes init_td16() [free memory of 16-bit LLR
  Turbo decoder]
- change function free_tdavx216() -> undoes init_tdavx216() [free memory of
  16-bit LLR Turbo decoder, AVX2 version]
- add free_lte_top() -> frees memory allocated by init_lte_top()
- change free_ul_ref_sigs() to set freed pointers to NULL
- add method free_transport() -> frees memory of ULSCH/DLSCH transport channels
- use the above functions when stopping/restarting the lte-softmodem

this methods free the memory that is allocated by the functions
phy_init_RU() and phy_init_lte_eNB()

Through configuration, the lte-softmodem can be halted to await a
reconfiguration from the lte-softmodem. A mutex and condition variable are used
to implement this.

Furthermore, the dependance of lte-softmodem.c on FlexRAN has been reduced to
one include and the flexran_agent_start() call.

fixes after merge with develop. Partial UE/eNB separation in build to avoid problems with NFAPI in oaisim UE/RRU.
tested with simulator.

This commit fixes issues introduced by the previous commit.

Summary of work:
- cleanup:
  - fix LOG_XX to be less verbose
  - fix cmake_targets/CMakeLists.txt
  - fix oaienv
  - remove dead code
- bug fixes:
  - in openair1/SCHED/fapi_l1.c we had:
      eNB->pdcch_vars[subframe&1].num_dci           = number_dci;
    should be:
      eNB->pdcch_vars[subframe&1].num_dci           = 0;
    This bug let the PHY send more DCIs than what should have been
    sent because num_dci is incremented later on in the code.
    This fix may be a problem for fapi mode, to be checked.
  - add new T VCD traces
  - revert openair1/PHY/TOOLS/file_output.c to 'develop' version
  - remove thread_id in logRecord/logRecord_mt
  - revert (and adapt) configuration files
  - be careful when doing frame++, we need to % 1024
  - revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
- NFAPI:
  - the open-nFAPI code has been included in the repository. See nfapi/README.
    Maybe we should "git clone" the Cisco repository instead. We have to be
    careful of availability though.

What has been tested:
- monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink

Anything else may fail to work, especially the FAPI mode, which has not
been tested at all.

It has been chosen to not include the full history of commits
from David. He included a binary version of wireshark, probably
a modified one that understands NFAPI. Wireshark is released under
the GPL license, we cannot include it in the repository. We could
have done a next commit to remove this binary. But then it would
still be present in the history of commits, which may not be allowed.
And it would take space on disk. We could edit the history to remove
wireshark entirely. But this operation is too complicated.

There was also a pcap capture file, which has nothing to do in
the history of commits and would take space on disk. There again,
it's too difficult to edit the history to remove it.

There was a file .gitignore that was also removed.

The original history can be found on David's repository:
https://gitlab.eurecom.fr/daveprice/openairinterface5g/
The branch is: nfapi-ru-rau-split.

A copy of that branch has been included in the internal OAI
repository, for those who have access to it.
The branch is the same. The last commit ID is
9106438239e0bc626ff1fa1d97d911caadd0fbb9.

You can compare the current commit with the commit 9106...
to see what differs.

The current commit has to be considered non-working.
The commit following the current commit will fix problems with
the work in the current commit.

If you use git bisect, don't spend time analyzing the current
commit.

- lock with mutexes
- don't start ENB_APP task, but Agent directly and wait in case of
  reconfiguration

- {restart,stop}_L1L2() in lte-softmodem.c
- add function start_phy_rrc() in enb_app.{c,h}, accessible from outside
- will be used to restart PHY and RRC when lte-softmodem is restarted

use only one FlexRAN wait function

making oaisim_nos1 compile

merge the implemention of Paging, RRCConnectionRelease, RRCConnectionReestablishment, E-RAB Modify, E-RAB Release

switching some LOG_I to LOG_D, fixes for RRU IF4p5. It was broken after changes in configuration procedures. Some configuration file changes.