phy_init_lte_ue_signal was renamed init_lte_ue_signal in openair1/PHY/INIT/defs.h
maybe it's the opposite that should have been done?

Functions used in one file and defined in another may have been
declared in the wrong header file.

modifications for TDD and IF4p5 (in particular TDD). Both in RRU and RAU components. Monolithic is unchanged.

introduce a new function to deal with this special case

added LUT for finer-grain ULSCH power measurement compensation based on TBS. Still seems too high, to be checked some more.

removed "short_offset" code from normal_prefix_mod. removed static declaration in PHY_ofdm_mod which was a cause for problems when parallelizing FFTs for FEP TX.

put pucch metric into uci->stat before calling harq_indication. Fixes an issue with PUCCH1 SNR measurements coming from HARQ.

added deactivation of ULSCH harq process after 3rd retransmission. Avoids problem of accumulating failed RA processes.

Adjustment for received power calculation in eNB pusch procedures. Added factor to account for mcs (mimic the power control adjustment in UE).
activated periodic trace for PHR/PUSCH SNR/PUCCH SNR in MAC.

- better ulsch harq management in phy (maybe not over)
- don't do schedule_CSI if UE not in RRC_CONNECTED (not sure if correct)
- don't call find_ulsch in fill_dci0
- some spaces cleaned
- log improved

-1 does not work

- re-use ta_timer
- when ta_timer is running:
  - no TA sent to UE
  - no TA from UE (for UE to have time to apply previous TA command)
- decrease ta_timer every TTI
- be careful to use correct value of ta_update (31 means no TA)

Maybe not correct, to be checked.

handling of PDCCH order. stoping UE-specific scheduler during RA procedure. checking for DCI format (resource allocation) to not overwrite resource_block_coding for format 1A DCIs.

put 50 PRB back in default enb configuration. added handling of UE release in L1/L2. detection of stale ULSCH configuration

removal of LOG_I put for debugging.

we can't use &ul_config_pdu->ulsch_harq_pdu.harq_information directly,
because that function is called for 2 cases and the substructure
harq_information is not as the same position in both cases.

switching some LOG_I to LOG_D, fixes for RRU IF4p5. It was broken after changes in configuration procedures. Some configuration file changes.

- don't use o_flip anymore in ulsch_decoding
- remove dl_cqi from eNB_UE_STATS
- put dl_cqi[NFAPI_CC_MAX] in UE_sched_ctrl
- adapt code for this dl_cqi change (from eNB_UE_STATS to UE_sched_ctrl)
- extract_pusch_csi has been fixed for CQI_ReportModeAperiodic_rm30,
  the others need to be done. Program will exit if one uses them.
  Not sure if setting sched_ctl->dl_cqi[CC_idP]  has to be done in this
  function...

- remove old unused code
- check dlsch0 the right way