changes:
- ue mcc/mnc 208.93
- use correct key/opc for user
- change addresses in conf file for them to be easier to understand
  (maybe)

With those changes, running:
   sudo ./run_enb_ue_virt_s1
in cmake_targets/tools should work out of the box

The user still has to configure correct IP addresses in
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_mme.conf

We supposed oaisim (enb+ue) machine to be on IP address 10.0.1.1
and EPC (hss, mme, spgw) machine to be on IP address 10.0.1.2.

re-adding the possibility in dlsim to bypass the DCI/PDCCH generation. This is necessary for accuracy of the dlsim-tests, which are working again now.

- rename UE_NO_LOG to DISABLE_LOG_X
  because the name is misleading. The full software
  is impacted, not only the UE part
- same for compilation option ---ue-no-log
  that becomes --disable-log
- keep LOG_X for the standard case, that is the
  case without DISABLE_LOG_X where printf has been
  put. Two reasons:
  * printf is not realtime friendly
  * keep behavior similar for other users who may
    be troubled by different logs that don't add
    any benefit to previous logs

The port to use should be 2152, not 2153.

--ue-trace : Enabling UE trace for debug
--ue-timing : Enabling UE timing trace
--ue-no-log : Disabling all LOG_X traces

those popped up thanks to previous commit

- print current working directory
- print git version (if available)
- print security keys
  this last one is a security breach, but as of today
  it's not a problem

No need for this special case. Plus, it fails with the work
from Nokia on compilation cleanup.

----------------------------------------------------------
bug 29

Ttile:
FDD should be TDD.

Bug Location:
  switch (oai_emulation.info.frame_type[0]) {
  case FDD:
    frame_type = "FDD";
    break;

  case TDD:
    frame_type = "FDD";
    break;
  }
----------------------------------------------------------

----------------------------------------------------------
bug 18

Ttile:
Probably he/she wants to copy the contents of arrays, but
this coding doesn't copy anything, moreover index overflow
occurs.

Bug Location:
u2e_t[UE_id][eNB_id]->tx_data[3]=tx[eNB_id][3];
u2e_t[UE_id][eNB_id]->rx_data[3]=rx[NB_eNB_INST+UE_id][3];

Note:
Detected by CppCheck
----------------------------------------------------------
bug 19

Title:
Probably he/she wants to copy the contents of arrays, but
this coding doesn't copy anything, moreover index overflow
occurs.

Bug Location:
e2u_t[eNB_id][UE_id]->tx_data[3]=tx[NB_eNB_INST+UE_id][3];
e2u_t[eNB_id][UE_id]->rx_data[3]=rx[eNB_id][3];

Note:
Detected by CppCheck
----------------------------------------------------------
bug 20

Title:
Probably he/she wants to copy the contents of arrays, but
this coding doesn't copy anything, moreover index overflow
occurs.

Bug Location:
tx_data[3]=cthread->tx_data[3];
rx_data[3]=cthread->rx_data[3];

Note:
Detected by CppCheck
----------------------------------------------------------

- RBs set to 25
- disable SRS

Using "system" to call "git log" is too error-prone.
In the test setup, lte-softmodem was blocked because
"git log" uses a pager ("less") and the pager was
waiting for the user to press enter.

We could pass "--no-pager" to "git log" but then
what if someone runs the softmodem out of the source
tree?

cmake defines PACKAGE_VERSION, we can use that instead,
as is done in openair-cn.

We have a strange problem with the timestamp of the very
first packets received from the LimeSDR that leads to
a complete failure of the eNB.

A simple workaround is to discard the first RX packet
just after a "start" of the device.

We also change the value of "tx_sample_advance" to a more
reasonable value. The problem of timestamp was "solved"
differently in the past and at the time we needed to put
a much higher value.

This may have to be refined at some point.

not sure of this one, to be checked

6 numbers (2 hexa digits each) separated by ':'
plus ending 0 makes 18 bytes, not 6, let's put 20