This was used for the ITTI analyzer.

The ITTI analyzer is now to be considered obsolete.
The source code will be removed at some point.

Log review step 1: legacy VCD removal, LOG macro modified, TTracer enabled at build time by default, in a way it, by default configuration,  provides console logs, as in previous versions

T tracer configuration identical for all executables, no ref to T Tracer config variables (T_port, T_wait...) outside the T tracer

Remove compilation warnings, also fix telnet server compilation failure and NB-IoT shared lib compilation failure introduced when reviewing L1 sources  organization

Whenever the value T_BUFFER_MAX changes, the tracers had to
be recompiled. The only reason why it was needed is because we
used some fixed size buffers to read events. This commit removes
this restriction.

Also, with the basic simulator, this value T_BUFFER_MAX now comes
with an #ifdef which would have required some special hackish-level
tricks in the tracers, which is not good.

Let's just allocate memory when needed.

This commit introduces a 'basic simulator'.

This basic simulator is made of:
- the standard eNB code using a special driver that mimics the USRP driver
- the standard UE code using a special driver that mimics the USRP driver
- no channel simulation
- some special code to deal with faster-than-realtime behaviour of this
  basic simulator

It connects one UE to one eNB. It requires an EPC, populated with the
correct configuration for the UE.

This is the initial release and may contain bugs (most probably race
conditions due to the faster-than-realtime behaviour).

To use it, see the documentation at:
    targets/ARCH/tcp_bridge/README.tcp_bridge_oai.

It has been tested with 25, 50 and 100 RBs, FDD mode.
(No check at all has been done to know if it could work in TDD mode.)

That allows to run several programs using this mechanism on the
same computer (say both eNB and UE, to debug).

(cherry picked from commit 3432385280c3155ee63a54be7c2e4846a17299de)

# Conflicts:
#	openair2/UTIL/LOG/log.c

If anyone needs it, it's a simple matter of reverting this
basic commit.

This is hack-level development.

With this commit you can do UDP DL traffic of say 100Mb/s over
a 5MHz link with one connected UE and the eNB should not crash
because of memory exhaustion. Of course on the receiver side
you won't get 100Mb/s and many many lost packets. But the system
should not crash. 1Gb/s does not work. So in any case try to
remain within some reasonable limits. There is no reason to
push more than twice the maximum achievable throughput of
the link.

This work is based on a patch proposed by Francesco Gringoli.

Not sure that the use of __KERNEL__ is the correct solution.
To be checked at some point.

After this commit, the following works:
./build_oai --UE -c

- defines RCconfig data structures
- adds method to read data
- use it in source files