Skip to content
Snippets Groups Projects
Commit aefb958a authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files

tx calibration for LimeSDR band 13

parent d930378e
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf
+ 85
− 82
View file @ aefb958a
...@@ -23,85 +23,89 @@ eNBs = ...@@ -23,85 +23,89 @@ eNBs =
component_carriers = ( component_carriers = (
{ {
frame_type = "FDD"; node_function = "eNodeB_3GPP";
tdd_config = 3; node_timing = "synch_to_ext_device";
tdd_config_s = 0; node_synch_ref = 0;
prefix_type = "NORMAL"; frame_type = "FDD";
eutra_band = 13; tdd_config = 3;
downlink_frequency = 751000000L; tdd_config_s = 0;
uplink_frequency_offset = 31000000; prefix_type = "NORMAL";
Nid_cell = 0; eutra_band = 13;
N_RB_DL = 50; downlink_frequency = 751000000L;
Nid_cell_mbsfn = 0; uplink_frequency_offset = 31000000;
nb_antennas_tx = 1; Nid_cell = 0;
nb_antennas_rx = 1; N_RB_DL = 50;
tx_gain = 90; Nid_cell_mbsfn = 0;
rx_gain = 125; nb_antenna_ports = 1;
prach_root = 0; nb_antennas_tx = 1;
prach_config_index = 0; nb_antennas_rx = 1;
prach_high_speed = "DISABLE"; tx_gain = 20;
prach_zero_correlation = 1; rx_gain = 116;
prach_freq_offset = 2; prach_root = 0;
pucch_delta_shift = 1; prach_config_index = 0;
pucch_nRB_CQI = 1; prach_high_speed = "DISABLE";
pucch_nCS_AN = 0; prach_zero_correlation = 1;
pucch_n1_AN = 32; prach_freq_offset = 2;
pdsch_referenceSignalPower = -20; pucch_delta_shift = 1;
pdsch_p_b = 0; pucch_nRB_CQI = 1;
pusch_n_SB = 1; pucch_nCS_AN = 0;
pusch_enable64QAM = "DISABLE"; pucch_n1_AN = 32;
pusch_hoppingMode = "interSubFrame"; pdsch_referenceSignalPower = -30;
pusch_hoppingOffset = 0; pdsch_p_b = 0;
pusch_groupHoppingEnabled = "ENABLE"; pusch_n_SB = 1;
pusch_groupAssignment = 0; pusch_enable64QAM = "DISABLE";
pusch_sequenceHoppingEnabled = "DISABLE"; pusch_hoppingMode = "interSubFrame";
pusch_nDMRS1 = 1; pusch_hoppingOffset = 0;
phich_duration = "NORMAL"; pusch_groupHoppingEnabled = "ENABLE";
phich_resource = "ONESIXTH"; pusch_groupAssignment = 0;
srs_enable = "DISABLE"; pusch_sequenceHoppingEnabled = "DISABLE";
/* srs_BandwidthConfig =; pusch_nDMRS1 = 1;
srs_SubframeConfig =; phich_duration = "NORMAL";
srs_ackNackST =; phich_resource = "ONESIXTH";
srs_MaxUpPts =;*/ srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
pusch_p0_Nominal = -90; srs_SubframeConfig =;
pusch_alpha = "AL1"; srs_ackNackST =;
pucch_p0_Nominal = -96; srs_MaxUpPts =;*/
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2"; pusch_p0_Nominal = -96;
pucch_deltaF_Format1b = "deltaF3"; pusch_alpha = "AL1";
pucch_deltaF_Format2 = "deltaF0"; pucch_p0_Nominal = -104;
pucch_deltaF_Format2a = "deltaF0"; msg3_delta_Preamble = 6;
pucch_deltaF_Format2b = "deltaF0"; pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
rach_numberOfRA_Preambles = 64; pucch_deltaF_Format2 = "deltaF0";
rach_preamblesGroupAConfig = "DISABLE"; pucch_deltaF_Format2a = "deltaF0";
/* pucch_deltaF_Format2b = "deltaF0";
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ; rach_numberOfRA_Preambles = 64;
rach_messagePowerOffsetGroupB = ; rach_preamblesGroupAConfig = "DISABLE";
*/ /*
rach_powerRampingStep = 4; rach_sizeOfRA_PreamblesGroupA = ;
rach_preambleInitialReceivedTargetPower = -108; rach_messageSizeGroupA = ;
rach_preambleTransMax = 10; rach_messagePowerOffsetGroupB = ;
rach_raResponseWindowSize = 10; */
rach_macContentionResolutionTimer = 48; rach_powerRampingStep = 4;
rach_maxHARQ_Msg3Tx = 4; rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
pcch_default_PagingCycle = 128; rach_raResponseWindowSize = 10;
pcch_nB = "oneT"; rach_macContentionResolutionTimer = 48;
bcch_modificationPeriodCoeff = 2; rach_maxHARQ_Msg3Tx = 4;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000; pcch_default_PagingCycle = 128;
ue_TimersAndConstants_t310 = 1000; pcch_nB = "oneT";
ue_TimersAndConstants_t311 = 10000; bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_n310 = 20; ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_n311 = 1; ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
} }
); );
srb1_parameters : srb1_parameters :
{ {
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
...@@ -131,9 +135,8 @@ eNBs = ...@@ -131,9 +135,8 @@ eNBs =
SCTP_OUTSTREAMS = 2; SCTP_OUTSTREAMS = 2;
}; };
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3"; mme_ip_address = ( { ipv4 = "192.168.12.70";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
...@@ -142,11 +145,11 @@ eNBs = ...@@ -142,11 +145,11 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "lo"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.4/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.lmssdr.conf
+ 6
− 6
View file @ aefb958a
...@@ -31,12 +31,12 @@ eNBs = ...@@ -31,12 +31,12 @@ eNBs =
downlink_frequency = 751000000L; downlink_frequency = 751000000L;
uplink_frequency_offset = 31000000; uplink_frequency_offset = 31000000;
Nid_cell = 0; Nid_cell = 0;
N_RB_DL = 25; N_RB_DL = 50;
Nid_cell_mbsfn = 0; Nid_cell_mbsfn = 0;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 70;
rx_gain = 107; rx_gain = 116;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -46,7 +46,7 @@ eNBs = ...@@ -46,7 +46,7 @@ eNBs =
pucch_nRB_CQI = 1; pucch_nRB_CQI = 1;
pucch_nCS_AN = 0; pucch_nCS_AN = 0;
pucch_n1_AN = 32; pucch_n1_AN = 32;
pdsch_referenceSignalPower = -17; pdsch_referenceSignalPower = -30;
pdsch_p_b = 0; pdsch_p_b = 0;
pusch_n_SB = 1; pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE"; pusch_enable64QAM = "DISABLE";
...@@ -64,9 +64,9 @@ eNBs = ...@@ -64,9 +64,9 @@ eNBs =
srs_ackNackST =; srs_ackNackST =;
srs_MaxUpPts =;*/ srs_MaxUpPts =;*/
pusch_p0_Nominal = -90; pusch_p0_Nominal = -96;
pusch_alpha = "AL1"; pusch_alpha = "AL1";
pucch_p0_Nominal = -96; pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6; msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2"; pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3"; pucch_deltaF_Format1b = "deltaF3";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf
+ 7
− 7
View file @ aefb958a
...@@ -39,8 +39,8 @@ eNBs = ...@@ -39,8 +39,8 @@ eNBs =
nb_antenna_ports = 1; nb_antenna_ports = 1;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 100; tx_gain = 70;
rx_gain = 111; rx_gain = 116;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -136,7 +136,7 @@ eNBs = ...@@ -136,7 +136,7 @@ eNBs =
}; };
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3"; mme_ip_address = ( { ipv4 = "192.168.12.70";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
...@@ -145,11 +145,11 @@ eNBs = ...@@ -145,11 +145,11 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "lo"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment