-
Rohit Gupta authoredRohit Gupta authored
build_helper 14.25 KiB
################################################################################
#
# Copyright (c) 2015, EURECOM (www.eurecom.fr)
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# The views and conclusions contained in the software and documentation are those
# of the authors and should not be interpreted as representing official policies,
# either expressed or implied, of the FreeBSD Project.
#
################################################################################
# file build_helper
# brief
# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
SUDO='sudo -E'
###############################
## echo and family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[1;34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1
cecho() {
# Color-echo
# arg1 = message
# arg2 = color
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
[ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
echo -e "$message"
return
}
echo_error() { cecho "$*" $red ;}
echo_fatal() { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow ;}
echo_success() { cecho "$*" $green ;}
echo_info() { cecho "$*" $blue ;}
######################### distribution helpers #
########################
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
# Ubuntu16.04
# Debian8.5
get_distribution_release() {
local distributor
if distributor=$(lsb_release -si 2>/dev/null) ; then
echo $distributor$(lsb_release -sr)
else
echo Unknown
fi
}
check_supported_distribution() {
local distribution=$(get_distribution_release)
case "$distribution" in
"Ubuntu16.04") return 0 ;;
"Ubuntu14.04") return 0 ;;
esac
return 1
}
##################
# Error handlers #
##################
handler_EXIT() {
local exit_code=$?
[ "$exit_code" -eq 0 ] || echo_error "build have failed"
exit $exit_code
}
trap handler_EXIT EXIT
###########################
# Cleaners
###########################
clean_kernel() {
$SUDO modprobe ip_tables
$SUDO modprobe x_tables
$SUDO iptables -P INPUT ACCEPT
$SUDO iptables -F INPUT
$SUDO iptables -P OUTPUT ACCEPT
$SUDO iptables -F OUTPUT
$SUDO iptables -P FORWARD ACCEPT
$SUDO iptables -F FORWARD
$SUDO iptables -t nat -F
$SUDO iptables -t mangle -F
$SUDO iptables -t filter -F
$SUDO iptables -t raw -F
echo_info "Flushed iptables"
$SUDO rmmod nasmesh > /dev/null 2>&1
$SUDO rmmod oai_nw_drv > /dev/null 2>&1
$SUDO rmmod openair_rf > /dev/null 2>&1
$SUDO rmmod ue_ip > /dev/null 2>&1
echo_info "removed drivers from kernel"
}
clean_all_files() {
set_openair_env
dir=$OPENAIR_DIR/cmake_targets
rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
rm -rf $dir/lte_build_oai $dir/lte-simulators/build
rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
}
###################################
# Compilers
###################################
compilations() {
cd $OPENAIR_DIR/cmake_targets/$1/build
set +e
{
rm -f $3
if [ "$VERBOSE_COMPILE" == "1" ]; then
make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
else
make -j`nproc` $2
fi
} > $dlog/$2.$REL.txt 2>&1
set -e
echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
if [ -s $3 ] ; then
cp $3 $4
echo_success "$2 compiled"
else
echo_error "$2 compilation failed"
exit 1
fi
}
############################################
# External packages installers
############################################
install_nettle_from_source() {
nettle_install_log=$OPENAIR_DIR/cmake_targets/log/nettle_install_log.txt
echo_info "\nInstalling Nettle. The log file for nettle installation is here: $nettle_install_log "
(
cd /tmp
echo "Downloading nettle archive"
$SUDO rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5
wget https://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz
if [ $? -ne 0 ]; then
wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
fi
if [ ! -f nettle-2.5.tar.gz ]; then
echo_error "Could not download nettle source files"
cd -
return
fi
tar -xzf nettle-2.5.tar.gz
cd nettle-2.5/
./configure --disable-openssl --enable-shared --prefix=/usr
echo "Compiling nettle"
make -j`nproc`
make check
$SUDO make install
) >& $nettle_install_log
}
install_gnutls_from_source(){
gnutls_install_log=$OPENAIR_DIR/cmake_targets/log/gnutls_install_log.txt
echo_info "\nInstalling Gnutls. The log file for Gnutls installation is here: $gnutls_install_log "
(
cd /tmp
echo "Downloading gnutls archive"
$SUDO rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23
wget http://mirrors.dotsrc.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
if [ $? -ne 0 ]; then
wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz fi
if [ ! -f gnutls-3.1.23.tar.xz ]; then
echo_error "Could not download gnutls source files"
cd -
return
fi
tar -xJf gnutls-3.1.23.tar.xz
cd gnutls-3.1.23/
./configure --prefix=/usr
echo "Compiling gnutls"
make -j`nproc`
$SUDO make install
)>& $gnutls_install_log
}
check_install_usrp_uhd_driver(){
#first we remove old installation
$SUDO apt-get remove -y uhd || true
$SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y
v=$(lsb_release -cs)
$SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
#The new USRP repository
$SUDO add-apt-repository ppa:ettusresearch/uhd -y
$SUDO apt-get update
$SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev
$SUDO apt-get -y install libuhd-dev libuhd003
}
install_usrp_uhd_driver() {
# We move uhd-host apart because it depends on linux kernel version
# On newer kernels, it fails to install
$SUDO apt-get -y install uhd-host
$SUDO uhd_images_downloader
}
check_install_bladerf_driver(){
if [ "$(get_distribution_release)" == "Ubuntu14.04" ] ; then
$SUDO add-apt-repository -y ppa:bladerf/bladerf
$SUDO apt-get update
fi
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
}
flash_firmware_bladerf() {
$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
check_install_additional_tools (){
$SUDO apt-get update
$SUDO apt-get install -y \
check \
dialog \
dkms \
gawk \
libboost-all-dev \
libpthread-stubs0-dev \
openvpn \
pkg-config \
python-dev \
python-pexpect \
sshfs \
swig \
tshark \
uml-utilities \
unzip \
valgrind \ vlan \
ctags \
ntpdate \
iperf3 \
android-tools-adb \
wvdial \
python-numpy \
sshpass \
nscd
$SUDO pip install paramiko
$SUDO pip install pyroute2
$SUDO rm -fr /opt/ssh
$SUDO GIT_SSL_NO_VERIFY=true git clone https://gist.github.com/2190472.git /opt/ssh
log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
(
$SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
wget -P /tmp https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
cd /tmp/netifaces-0.10.4
$SUDO python setup.py install
cd -
) >& $log_netiface
}
check_install_oai_software() {
local specific_packages=""
if ! check_supported_distribution; then
echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
exit 1
fi
$SUDO apt-get update
$SUDO apt install -y software-properties-common
case "$(get_distribution_release)" in
"Ubuntu14.04")
specific_packages="libtasn1-3-dev"
# For iperf3
$SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
$SUDO apt-get update
;;
"Ubuntu16.04")
specific_packages="libtasn1-6-dev"
;;
esac
$SUDO apt-get install -y \
$specific_packages \
autoconf \
automake \
bison \
build-essential \
cmake \
cmake-curses-gui \
doxygen \
doxygen-gui \
texlive-latex-base \
ethtool \
flex \
gccxml \
gdb \
git \
graphviz \
gtkwave \
guile-2.0-dev \
iperf \
iproute \
iptables \
iptables-dev \
libatlas-base-dev \ libatlas-dev \
libblas-dev \
libconfig8-dev \
libffi-dev \
libforms-bin \
libforms-dev \
libgcrypt11-dev \
libgmp-dev \
libgtk-3-dev \
libidn2-0-dev \
libidn11-dev \
libmysqlclient-dev \
liboctave-dev \
libpgm-dev \
libpython2.7-dev \
libsctp1 \
libsctp-dev \
libssl-dev \
libtool \
libusb-1.0-0-dev \
libxml2 \
libxml2-dev \
libxslt1-dev \
linux-headers-`uname -r` \
mscgen \
octave \
octave-signal \
openssh-client \
openssh-server \
openssl \
python \
subversion \
xmlstarlet \
python-pip \
pydb \
wget
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
# First we remove gnutls/nettle installation and then install from sources
$SUDO apt-get remove -y libgnutls-dev nettle-dev nettle-bin
install_nettle_from_source
install_gnutls_from_source
install_asn1c_from_source
}
install_asn1c_from_source(){
asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
(
$SUDO rm -rf /tmp/asn1c-r1516
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
cd /tmp/asn1c-r1516
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0
./configure
make -j`nproc`
$SUDO make install
cd -
) > $asn1_install_log 2>&1
}
#################################################
# 2. compile
################################################
install_nas_tools() { cd $1
if [ ! -f .ue.nvram ]; then
echo_success "generate .ue_emm.nvram .ue.nvram"
./nvram --gen
else
[ ./nvram -nt .ue.nvram -o ./nvram -nt .ue_emm.nvram ] && ./nvram --gen
fi
if [ ! -f .usim.nvram ]; then
echo_success "generate .usim.nvram"
./usim --gen
else
[ ./usim -nt .usim.nvram ] && ./usim --gen
fi
}
################################
# set_openair_env
###############################
set_openair_env(){
fullpath=`readlink -f $BASH_SOURCE`
[ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
openair_path=${fullpath%/cmake_targets/*}
openair_path=${openair_path%/targets/*}
openair_path=${openair_path%/openair[123]/*}
export OPENAIR_DIR=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
export OPENAIR3_DIR=$openair_path/openair3
export OPENAIR_TARGETS=$openair_path/targets
}
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
while true
do
FORLOOP=FALSE
# Get all the child process id
for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
do
if [ $i -ne $CURPID ] ; then
procid[$arraycounter]=$i
arraycounter=`expr $arraycounter + 1`
ppid=$i
FORLOOP=TRUE
fi
done
if [ "$FORLOOP" = "FALSE" ] ; then
arraycounter=`expr $arraycounter - 1`
## We want to kill child process id first and then parent id's
while [ $arraycounter -ne 0 ]
do
echo "first we send ctrl-c to program"
$SUDO kill -INT "${procid[$arraycounter]}"
sleep 5
echo "Now we force kill if that didn't work"
$SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
arraycounter=`expr $arraycounter - 1`
done
exit
fi
done}
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {
local ip=$1
local stat=1
if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
OIFS=$IFS
IFS='.'
ip=($ip)
IFS=$OIFS
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
stat=$?
fi
return $stat
}