diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
index 212f341580f6acbab2cb4fc8994e38beb4f6b47e..3ce32398f7ac5d6fe42720447565c0fb6326213a 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
- mobile_network_code = "92";
+ mobile_network_code = "93";
////////// Physical parameters:
@@ -31,7 +31,7 @@ eNBs =
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
- N_RB_DL = 50;
+ N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
@@ -131,7 +131,7 @@ eNBs =
};
////////// MME parameters:
- mme_ip_address = ( { ipv4 = "10.0.1.1";
+ mme_ip_address = ( { ipv4 = "192.168.12.171";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
@@ -140,11 +140,11 @@ eNBs =
NETWORK_INTERFACES :
{
- ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.1.229/24";
+ ENB_INTERFACE_NAME_FOR_S1_MME = "eth2";
+ ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.80/24";
- ENB_INTERFACE_NAME_FOR_S1U = "eth3";
- ENB_IPV4_ADDRESS_FOR_S1U = "10.0.1.229/24";
+ ENB_INTERFACE_NAME_FOR_S1U = "eth2";
+ ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.80/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c
index 30e81995821b8baf4e83a1145967e009b1ae4959..bca6f4ff4404b37c25cdba9ca7f4fdf11e35af16 100644
--- a/targets/RT/USER/lte-softmodem.c
+++ b/targets/RT/USER/lte-softmodem.c
@@ -422,7 +422,7 @@ void help (void) {
printf(" --ue-txgain set UE TX gain\n");
printf(" --ue-scan_carrier set UE to scan around carrier\n");
printf(" --loop-memory get softmodem (UE) to loop through memory instead of acquiring from HW\n");
- printf(" -C Set the downlink frequecny for all Component carrier\n");
+ printf(" -C Set the downlink frequency for all component carriers\n");
printf(" -d Enable soft scope and L1 and L2 stats (Xforms)\n");
printf(" -F Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n");
printf(" -g Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n");
@@ -436,6 +436,7 @@ void help (void) {
printf(" -r Set the PRB, valid values: 6, 25, 50, 100 \n");
printf(" -S Skip the missed slots/subframes \n");
printf(" -t Set the maximum uplink MCS\n");
+ printf(" -T Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n");
printf(" -U Set the lte softmodem as a UE\n");
printf(" -W Enable L2 wireshark messages on localhost \n");
printf(" -V Enable VCD (generated file will be located atopenair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n");
@@ -2061,7 +2062,7 @@ static void get_options (int argc, char **argv)
{NULL, 0, NULL, 0}
};
- while ((c = getopt_long (argc, argv, "C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:x:",long_options,NULL)) != -1) {
+ while ((c = getopt_long (argc, argv, "C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:Tx:",long_options,NULL)) != -1) {
switch (c) {
case LONG_OPTION_MAXPOWER:
tx_max_power[0]=atoi(optarg);
@@ -2326,8 +2327,13 @@ static void get_options (int argc, char **argv)
printf("Transmission mode > 2 (%d) not supported for the moment\n",transmission_mode);
exit(-1);
}
+ break;
+ case 'T':
+ for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++)
+ frame_parms[CC_id]->frame_type = TDD;
break;
+
case 'h':
help ();
exit (-1);
@@ -2487,12 +2493,10 @@ int main( int argc, char **argv )
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
set_latency_target();
-
-
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id] = (LTE_DL_FRAME_PARMS*) malloc(sizeof(LTE_DL_FRAME_PARMS));
/* Set some default values that may be overwritten while reading options */
- frame_parms[CC_id]->frame_type = FDD; /* TDD */
+ frame_parms[CC_id]->frame_type = FDD;
frame_parms[CC_id]->tdd_config = 3;
frame_parms[CC_id]->tdd_config_S = 0;
frame_parms[CC_id]->N_RB_DL = 100;
@@ -3088,7 +3092,7 @@ int main( int argc, char **argv )
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
rf_map[CC_id].card=0;
- rf_map[CC_id].chain=CC_id+1;
+ rf_map[CC_id].chain=CC_id;
}
// connect the TX/RX buffers