diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/ch_conf_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/ch_conf_nas.sh
deleted file mode 100755
index 5dd77a0b19cb2566779ba3dcbb0821fc8519e8b4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/ch_conf_nas.sh
+++ /dev/null
@@ -1,97 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR=~/Openair/openair1
-export OPENAIR2_DIR=~/Openair/openair2
-export OPENAIR3_DIR=~/Openair/openair3
-export OPENAIR3_HOME=~/Openair/openair3
-
-echo Clusterhead address is $CH1_IN6_ADDR
-#echo Launching AS and RF
-#./start_openair.sh 8 0
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
-
-#CH1<-> MR1 multicast (rajout THC)
-echo EADS Multicast for CH1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
-
-
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-#CH1<-> MR2 (MPLS PMIP signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
-#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
-
-
-#CH1<-> MR2 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
-
-
-
-#CH Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH<-> MR1 Imulticast
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
-#CH<-> MR2 (IP Signaling)
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
-#CH<-> MR2 (MPLS user-plane bearer)
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.1/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" > /sys/mpls/debug
-
-#echo Multicast state launched with config_ch1
-#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch1 &
-
-#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/ch_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/ch_nas.sh
deleted file mode 100755
index 7c01a9b61e29f5f0ce519c7c8685da8d2395ac70..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/ch_nas.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo ./ch_conf_nas.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-xterm -hold -e "cd /homes/foubert/Openair/openair2/SIMULATION/USER_TOOLS/LAYER2_SIM ; ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top"
-
-#watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-#./stop_rf.sh
-sleep 2
-./del_mpls.sh
-#sleep 2
-#./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/del_mpls.sh b/openair3/EXAMPLES/3Nodes_EMULATION/del_mpls.sh
deleted file mode 100755
index 1daef35dd8b479d35b94e0a571e4ff32f7def5c6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/del_mpls.sh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/bash
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by phil, Huu Nghia, 8 July 08
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mpls_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mpls_nas.sh
deleted file mode 100755
index eb6bb742af16a35504835b60c1ce534bd1347cf3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS
-sudo modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- sudo mpls labelspace set dev nasmesh0 labelspace 0
- sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr1_conf_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr1_conf_nas.sh
deleted file mode 100755
index 90e49161b547343d5f3ff9dc477ca973a52ce14b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr1_conf_nas.sh
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-#echo Launching AS and RF
-#./start_openair.sh 8 8
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-#sudo ifconfig eth2 10.0.1.3
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.3
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-#echo Multicast state launched with config_mr1
-#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
-
-#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
-
-
-
-
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr1_mpls_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr1_mpls_nas.sh
deleted file mode 100755
index 309fd1a39b3817edf181a1468ff4ceb7d2e23847..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr1_mpls_nas.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr1
-
-echo "0" > /sys/mpls/debug
-
-# MN1 <-> MN3
-echo 'MN3->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN3_CH1_MR1_MN1 labelspace 0 proto ipv6
-echo 'MN1->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN1_MR1_CH1_MN3 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes from MN1 to MN3"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth2
-
-# MN1 <-> MN2
-echo 'MN2->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes from MN1 to MN2"
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr1_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr1_nas.sh
deleted file mode 100755
index 6286c6fd919b60d4fd59578b7d185fa9c7dc9fc0..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr1_nas.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas.sh
-./mr1_mpls_nas.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth2
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-#watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-xterm -hold -e "cd /homes/foubert/Openair/openair2/SIMULATION/USER_TOOLS/LAYER2_SIM ; ./mac_sim -m1 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top"
-
-#./stop_rf.sh
-sleep 2
-./del_mpls.sh
-#sleep 2
-#./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas.sh
deleted file mode 100755
index 459f928d2131b53ad1d9c62a5f290101d4b37549..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-#echo Launching AS and RF
-#./start_openair.sh 8 9
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.4
-#sudo ifconfig eth3 10.0.3.3
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-# Com between MR2 <-> CH1
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-# Com between MR2 <-> CH2
-#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
-
-#echo Multicast state launched with config_mr2
-#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
-#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
-
-#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas_barca_parking.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas_barca_parking.sh
deleted file mode 100755
index 63fe84f6009f13463343740636f73758b1864c18..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 5 9
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.4
-sudo ifconfig eth0 10.0.3.3
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-# Com between MR2 <-> CH1
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-
-
-# Com between MR2 <-> CH2
-#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
-
-
-echo Multicast state launched with config_mr2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_mpls_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_mpls_nas.sh
deleted file mode 100755
index 80265fddb26c77fb03c590abf5e19371593438f3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_mpls_nas.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-sudo modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
-#MN2->MN1
-./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
-
-#CH1->CH2
-./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
-#CH2->CH1
-./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
-
-#MN3->MN1
-var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH1_MN1 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-sudo ip -6 route add $MN3_IN6_ADDR/128 dev eth3
-#MN1->MN3
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN1_CH1_MR2_MN3 labelspace 0 proto ipv6
-
-#MN3->MN2
-var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH2_MN2 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-#MN2->MN3
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN2_CH2_MR2_MN3 labelspace 0 proto ipv6
-
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas.sh
deleted file mode 100755
index f906bf6d50ee8f430e455c0d4544bd7964f95721..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-
-./mr2_conf_nas.sh
-./mr2_mpls_nas.sh
-sudo sysctl -w net.ipv6.conf.eth3.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth3 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth3
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-#watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-xterm -hold -e "cd /homes/foubert/Openair/openair2/SIMULATION/USER_TOOLS/LAYER2_SIM ; ./mac_sim -m2 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top"
-
-#./stop_rf.sh
-sleep 2
-./del_mpls.sh
-#sleep 2
-#./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_outdoor.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_outdoor.sh
deleted file mode 100755
index 31861dc030bd75c7f6eb7013e46a2244da164261..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_outdoor.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking.sh
deleted file mode 100755
index 1d8ecbb084ae130f6bab49f376ec31b98f098e2e..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_parking.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking_NOPMIP.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking_NOPMIP.sh
deleted file mode 100755
index a4aa2b256ef678958dc55fc19407a81d46db03d0..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking_NOPMIP.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_parking.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca.sh
deleted file mode 100755
index 59facdc7404c5e8403d9fb22a7bd79952957b461..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 1 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr3
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_outdoor.sh
deleted file mode 100755
index b1c6635571eb33b7b8776ee2c3a1e4eb8e4a1845..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 8 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.2.5
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr3
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_parking.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_parking.sh
deleted file mode 100755
index 94384ed06575ac7dc6a1a88a7c4bca9d0c70b48a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 6 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.2.5
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr3
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_barca.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_barca.sh
deleted file mode 100755
index a9582507cde029be9a789892fa8d58268c7ac393..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_barca.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr3
-
-echo "0" > /sys/mpls/debug
-
-
-echo 'MN1->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-
-
-
-echo 'MN3->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
-
-
-echo 'MN2->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_nas_barca.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_nas_barca.sh
deleted file mode 100755
index a9582507cde029be9a789892fa8d58268c7ac393..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_nas_barca.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr3
-
-echo "0" > /sys/mpls/debug
-
-
-echo 'MN1->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-
-
-
-echo 'MN3->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
-
-
-echo 'MN2->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca.sh
deleted file mode 100755
index a0692f05909a12c1b13ac32dc77c51c16cdd2ef7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_outdoor.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_outdoor.sh
deleted file mode 100755
index 721e293f55853b5dda2939923e66e5d646cc9652..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca_outdoor.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_parking.sh b/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_parking.sh
deleted file mode 100755
index 061c199ac8a8a6db25e3f3a07a0fdc887caef902..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_parking.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca_parking.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/params.sh b/openair3/EXAMPLES/3Nodes_EMULATION/params.sh
deleted file mode 100755
index 52711b9f68040332afa2917c629ad1179f062c55..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/params.sh
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/bash
-
-MR1_IN_ADDR=10.0.1.3
-MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
-MR1_EG_ADDR=192.168.9.1
-MR1_EG6_ADDR=2001:660:5502::100
-# Flow CH1->MR1
-MR1_LABEL_IN=1001
-# Flow MR1->CH1
-MR1_LABEL_OUT=1000
-ETH_MR1=eth0
-
-MR2_IN_ADDR=10.0.1.4
-MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
-MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
-MR2_EG6_ADDR=2001:660:5502::300
-ETH_MR2=eth0
-# Flow CH1->MR2
-MR2_CH1_LABEL_IN=2000
-# Flow MR2->CH1
-MR2_CH1_LABEL_OUT=2001
-# Flow CH2->MR2
-MR2_CH2_LABEL_IN=3001
-# Flow MR2->CH2
-MR2_CH2_LABEL_OUT=3000
-
-MR3_IN_ADDR=10.0.1.5
-MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
-MR3_EG_ADDR=192.168.10.1
-MR3_EG6_ADDR=2001:660:5502::200
-# Flow CH2->MR3
-MR3_LABEL_IN=4000
-# Flow MR3->CH2
-MR3_LABEL_OUT=4001
-ETH_MR3=eth2
-
-CH1_IN_ADDR=10.0.1.1
-CH2_IN_ADDR=10.0.1.2
-
-CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
-CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
-
-## Communication between the CHs
-CH1_MR2_CH2_LABEL_IN=8001
-CH1_MR2_CH2_LABEL_OUT=8000
-CH2_MR2_CH1_LABEL_IN=9001
-CH2_MR2_CH1_LABEL_OUT=9000
-
-## Com between MN1 and MN3
-MN1_MR1_CH1_MN3=1500
-MN3_CH1_MR1_MN1=1501
-MN1_CH1_MR2_MN3=2500
-MN3_MR2_CH1_MN1=2501
-
-## Com between MN2 and MN3
-MN3_MR2_CH2_MN2=3500
-MN2_CH2_MR2_MN3=3501
-MN3_CH2_MR3_MN2=4500
-MN2_MR3_CH2_MN3=4501
-
-#MN1_IN6_ADDR=2001:660:5502::20
-#MN2_IN6_ADDR=2001:660:5502::25
-#MN1_IN6_ADDR=2001:660:5502::110
-MN1_IN6_ADDR=2001:660:5502:0:211:43ff:fe74:77bb
-MN1_IN_ADDR=192.168.9.2
-
-MN2_IN6_ADDR=2001:660:5502::210
-#MN3_IN6_ADDR=2001:660:5502::310
-#MN3_IN6_ADDR=2001:660:5502:0:240:8cff:fe77:9b79
-MN3_IN6_ADDR=2001:660:5502:0:218:8bff:feb0:50aa
-MN2_IN_ADDR=192.168.10.2
-
-# Put the right OPENAIR3 path here
-OPENAIR3_HOME=~/Openair/openair3
-OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/pmip6d
-OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
-REFLECTOR_DIR=$OPENAIR3_HOME/EXAMPLES/BARCA_TRIALS/REFLECTOR
-
-# Put the right OPENAIR2 path here
-#OPENAIR2_DIR=~/openair2_r234/openair2/
-OPENAIR2_DIR=~/Openair/openair2
-
-
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/start_openair.sh b/openair3/EXAMPLES/3Nodes_EMULATION/start_openair.sh
deleted file mode 100755
index f6c1c277d9c9797713a46b3fd77503e1cb1efe8d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/start_openair.sh
+++ /dev/null
@@ -1,127 +0,0 @@
-if [ "$1" == "" ]; then
- echo "Please provide a TX power level (0-8)"
- exit
-fi
-
-if [ "$2" == "" ]; then
- echo "Please provide a Node ID (0-7 for CH, 8-15 for MR/UE)"
- exit
-fi
-
-if [ "$OPENAIR1_DIR" == "" ] ; then
- echo "Please set OPENAIR1_DIR environment variable"
- exit
-else
- echo "OPENAIR1_DIR Set to $OPENAIR1_DIR"
-fi
-
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-source ./txgains.sh
-
-case $1 in
- 0)
- CBMIMO1_POWER=$CBMIMO1_m20_dBm
- echo "Configuring CBMIMO1 for -20dBm ($CBMIMO1_POWER)"
- ;;
- 1)
- CBMIMO1_POWER=$CBMIMO1_m15_dBm
- echo Configuring CBMIMO1 for -15dBm
- ;;
- 2)
- CBMIMO1_POWER=$CBMIMO1_m10_dBm
- echo Configuring CBMIMO1 for -10dBm
- ;;
- 3)
- CBMIMO1_POWER=$CBMIMO1_m5_dBm
- echo Configuring CBMIMO1 for -5dBm
- ;;
- 4)
- CBMIMO1_POWER=$CBMIMO1_0_dBm
- echo Configuring CBMIMO1 for 0dBm
- ;;
- 5)
- CBMIMO1_POWER=$CBMIMO1_5_dBm
- echo Configuring CBMIMO1 for 5dBm
- ;;
- 6)
- CBMIMO1_POWER=$CBMIMO1_10_dBm
- echo Configuring CBMIMO1 for 10dBm
- ;;
- 7)
- CBMIMO1_POWER=$CBMIMO1_15_dBm
- echo Configuring CBMIMO1 for 15dBm
- ;;
- 8)
- CBMIMO1_POWER=$CBMIMO1_20_dBm
- echo Configuring CBMIMO1 for 20dBm
- ;;
- *)
- echo Invalid TX power
- exit
-esac
-
-
-echo Removing openair_rf,openair_l2 and openair_rrc modules
-sudo rmmod -f openair_rrc
-sudo rmmod -f openair_l2
-sudo rmmod -f openair_rf
-
-sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_l2.ko
-OARF_RET=`lsmod | grep -e openair_rf`
-
-if [ "$OARF_RET" = "" ]; then
- echo Error loading openair1 module
- exit
-fi
-
-sudo insmod $OPENAIR2_DIR/LAYER2/openair_layer2.ko
-OA2_RET=`lsmod | grep -e openair_l2`
-
-if [ "$OA2_RET" = "" ]; then
- echo Error loading openair2 module
- exit
-fi
-
-
-sudo insmod $OPENAIR2_DIR/RRC/MESH/openair_RRC.ko
-OARRC_RET=`lsmod | grep -e openair_rrc`
-if [ "$OARRC_RET" = "" ]; then
- echo Error loading openair RRC module
- exit
-fi
-
-OA_DEV="/dev/openair0"
-
-if [ -c "$OA_DEV" ]; then
- echo "$OA_DEV exists"
-else
- echo "creating $OA_DEV"
- sudo mknod $OA_DEV c 127 0
- sudo chmod a+rw /dev/openair0
-fi
-
-./openair_rf_cbmimo1 1 0
-./openair_rf_cbmimo1 1 6 $CBMIMO1_POWER
-if [ $2 -lt "8" ]; then
- ./openair_rf_cbmimo1 1 1 1 $2
-elif [ $2 -lt "16" ]; then
- ./openair_rf_cbmimo1 1 3 1 $2
-else
- echo Illegal Node ID, exiting
- exit
-fi
-
-sleep 1
-
-
-# Watch the status of the radio to check for hardware exit event
-
-#OA1_STATE=`cat /proc/openair1/openair1_state`
-
-#while [ "$OA1_STATE" != "EXITED" ]; do
-# OA1_STATE=`cat /proc/openair1/openair1_state`
-# sleep .5
-#done
-
-#./openair_rf_cbmimo1 1 4 1
-#echo CBMIMO1 Hardware exit, restarting ...
diff --git a/openair3/EXAMPLES/3Nodes_EMULATION/stop_rf.sh b/openair3/EXAMPLES/3Nodes_EMULATION/stop_rf.sh
deleted file mode 100755
index 96f1ea5ff7c5718a7c948ed0112cd9c6460a403f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/3Nodes_EMULATION/stop_rf.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-echo STOP STARTS...
-./openair_rf_cbmimo1 1 4 1
-sleep 2
-echo STOP RF DONE
-sudo killall chbch_scope
-echo STOP CHBCH SCOPE DONE
-sudo killall sach_scope
-echo STOP_SACH SCOPE DONE
-sleep 1
-sudo rmmod nasmesh
-sleep 1
-echo REMOVE NASMESH MODULE DONE
-sudo rmmod openair_rrc
-sleep 1
-echo REMOVE RRC MODULE DONE
-sudo rmmod openair_l2
-sleep 1
-echo REMOVE LAYER2 MODULE DONE
-sudo rmmod openair_rf
-echo REMOVE RF MODULE DONE
-echo STOP FINISHED SUCCESSFULLY
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch1 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch1
deleted file mode 100755
index e5bd5a6c23b35e67bc768a52a1cfdd6088b8403d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch1
+++ /dev/null
@@ -1,24 +0,0 @@
-# Configuration file of CH1 (SP4-Wimaxhead1)
-# side linked to MR1 (Chorist Edge 1) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to MR2 (SP4-Wimaxrelay-2) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.30.10.10,226.40.10.10
-groupes=226.30.10.11,226.40.10.11
-groupes=226.30.10.12,226.40.10.12
-groupes=226.30.10.13,226.40.10.13
-groupes=226.30.10.14,226.40.10.14
-groupes=226.30.10.15,226.40.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch2 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch2
deleted file mode 100755
index 69a72ff2450ab9f4befe9a707b421c2fce9f4aa4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch2
+++ /dev/null
@@ -1,24 +0,0 @@
-# Configuration file of CH1 (SP4-Wimaxhead2)
-# side linked to MR2 (SP4-Wimaxrelay-2) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to MR3 (SP4-Edge2) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.50.10.10,226.30.10.10
-groupes=226.50.10.11,226.30.10.11
-groupes=226.50.10.12,226.30.10.12
-groupes=226.50.10.13,226.30.10.13
-groupes=226.50.10.14,226.30.10.14
-groupes=226.50.10.15,226.30.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn1 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn1
deleted file mode 100755
index b0f7d27317a1cd52e62f80725a99341f38e1b3ca..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn1
+++ /dev/null
@@ -1,26 +0,0 @@
-# Configuration file of MN1 (Dieppe)
-# side linked to EADS End-users (Wifi side) : name of interface, IPv4, TTL
-int_1=wifi0
-ipv_1=4
-ttl_1=65
-
-# side linked to MR1 (CHORIST-Edge1): name of interface, IPv4, TTL
-int_2=eth0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=224.0.55.55,224.0.66.66
-groupes=226.10.10.10,226.20.10.10
-groupes=226.10.10.11,226.20.10.11
-groupes=226.10.10.12,226.20.10.12
-groupes=226.10.10.13,226.20.10.13
-groupes=226.10.10.14,226.20.10.14
-groupes=226.10.10.15,226.20.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn2 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn2
deleted file mode 100755
index a29529cfa198232cb2a4c60fa1f167c1f8a202ed..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn2
+++ /dev/null
@@ -1,25 +0,0 @@
-# Configuration file of MN2 (Sarlat)
-# side linked to MR3 (CHORIST-Edge2) : name of interface, IPv4, TTL
-int_2=eth0
-ipv_2=4
-ttl_2=65
-
-# side linked to EADS End-users (Wifi side) : name of interface, IPv4, TTL
-int_1=wifi0
-ipv_1=4
-ttl_1=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.20.10.10,226.10.10.10
-groupes=226.20.10.11,226.10.10.11
-groupes=226.20.10.12,226.10.10.12
-groupes=226.20.10.13,226.10.10.13
-groupes=226.20.10.14,226.10.10.14
-groupes=226.20.10.15,226.10.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr1 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr1
deleted file mode 100755
index d67cf80ba00a59ca8c7ca610da6efd19c23d7c0d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr1
+++ /dev/null
@@ -1,26 +0,0 @@
-# Configuration file MR1 (Chorist-Edge1)
-# side linked to MN1 (DIEPPE) : name of interface, IPv4, TTL
-int_1=eth0
-ipv_1=4
-ttl_1=65
-
-# side linked to CH1 (SP4-Wimaxhead1) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.20.10.10,226.30.10.10
-groupes=226.20.10.11,226.30.10.11
-groupes=226.20.10.12,226.30.10.12
-groupes=226.20.10.13,226.30.10.13
-groupes=226.20.10.14,226.30.10.14
-groupes=226.20.10.15,226.30.10.15
-
-# different port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr2 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr2
deleted file mode 100755
index a0ec0e1f3cd9bf1b5890302d4a5d61b846ee3085..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr2
+++ /dev/null
@@ -1,27 +0,0 @@
-# Configuration file MR2 (SP4-Wimaxrelay-2)
-# side linked to CH1 (SP4-Wimaxhead1) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to CH1 (SP4-Wimaxhead2) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.40.10.10,226.50.10.10
-groupes=226.40.10.11,226.50.10.11
-groupes=226.40.10.12,226.50.10.12
-groupes=226.40.10.13,226.50.10.13
-groupes=226.40.10.14,226.50.10.14
-groupes=226.40.10.15,226.50.10.15
-
-
-# different port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr3 b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr3
deleted file mode 100755
index f998c448ee4861c7c3032547b81fe2980fad1315..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr3
+++ /dev/null
@@ -1,25 +0,0 @@
-# Configuration file MR3 (Chorist-Edge2)
-# side linked to CH2 (SP4-Wimaxhead2) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to MN2 (SARLAT) : name of interface, IPv4, TTL
-int_2=eth0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.30.10.10,226.20.10.10
-groupes=226.30.10.11,226.20.10.11
-groupes=226.30.10.12,226.20.10.12
-groupes=226.30.10.13,226.20.10.13
-groupes=226.30.10.14,226.20.10.14
-groupes=226.30.10.15,226.20.10.15
-
-# different port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector
deleted file mode 100755
index fb49d3273c2623b548ba90842de1e8ba114664c2..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector and /dev/null differ
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector-forwarding-v4.c b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector-forwarding-v4.c
deleted file mode 100755
index ebbd33d770cb4f970eeaf5bb8b1e460492e94179..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector-forwarding-v4.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/*******************************/
-/* reflector-forwarding-v4m by */
-/*******************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <strings.h>
-#include <netdb.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/unistd.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <sys/signal.h>
-#include <sys/param.h>
-#include <errno.h>
-#include <arpa/inet.h>
-#include <pthread.h>
-#include <syslog.h>
-/* To get ifreq */
-#include <arpa/inet.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-#include <limits.h>
-
-#include <netinet/in_systm.h>
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-
-#define _PATH_PROCNET_IFINET6 "/proc/net/if_inet6"
-#define MSGBUF_SIZE 32768
-#define IFNAMSIZE 11
-#define INLINE inline __attribute__((always_inline))
-struct ipaddr_str {
- char buf[MAX(INET6_ADDRSTRLEN, INET_ADDRSTRLEN)];
-};
-int IP_VERSION;
-static INLINE const char *ip4_to_string(struct ipaddr_str * const buf, const struct in_addr addr4)
-{
- return inet_ntop(AF_INET, &addr4, buf->buf, sizeof(buf->buf));
-}
-static INLINE const char *ip6_to_string(struct ipaddr_str * const buf, const struct in6_addr * const addr6)
-{
- return inet_ntop(AF_INET6, addr6, buf->buf, sizeof(buf->buf));
-}
-static INLINE const char *sockaddr4_to_string(struct ipaddr_str * const buf, const struct sockaddr * const addr)
-{
- const struct sockaddr_in * const addr4 = (const struct sockaddr_in *)addr;
- return ip4_to_string(buf, addr4->sin_addr);
-}
-int programshutdown (void);
-
-#define NUM_THREADS 200
-struct thread_data {
- int thread_id;
- char interface1[11];
- char multicast_addr1[41];
- char interface2[11];
- char multicast_addr2[41];
- int ttl1;
- int ttl2;
- int port1;
- int port2;
-};
-
-struct thread_data thread_data_array[NUM_THREADS];
-/*******************************************************************
-*From net-tools lib/interface.c
- *
- *******************************************************************/
-int
-get_ipv6_address(char *ifname, struct sockaddr_in6 *saddr6, int scope_in)
-{
- char addr6[40], devname[IFNAMSIZE];
- char addr6p[8][5];
- int plen, scope, dad_status, if_idx;
- FILE *f;
- struct sockaddr_in6 tmp_sockaddr6;
-
- if ((f = fopen(_PATH_PROCNET_IFINET6, "r")) != NULL) {
- while (fscanf(f, "%4s%4s%4s%4s%4s%4s%4s%4s %02x %02x %02x %02x %20s\n",
- addr6p[0], addr6p[1], addr6p[2], addr6p[3],
- addr6p[4], addr6p[5], addr6p[6], addr6p[7],
- &if_idx, &plen, &scope, &dad_status, devname) != EOF) {
- if (!strcmp(devname, ifname)) {
- sprintf(addr6, "%s:%s:%s:%s:%s:%s:%s:%s",
- addr6p[0], addr6p[1], addr6p[2], addr6p[3],
- addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
- printf( "\t inet6 addr: %s\n", addr6);
- printf("\t Scope: %d\n", scope);
-
- if(scope == scope_in) {
- printf( "\tFound GLOBAL addr: %s:%s:%s:%s:%s:%s:%s:%s\n",
- addr6p[0], addr6p[1], addr6p[2], addr6p[3],
- addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
- inet_pton(AF_INET6,addr6,&tmp_sockaddr6);
- memcpy(&saddr6->sin6_addr, &tmp_sockaddr6, sizeof(struct in6_addr));
- fclose(f);
- return 1;
- }
- }
- }
-
- fclose(f);
- }
-
- return 0;
-}
-
-
-
-/*****************************************************/
-/* Threaded routine */
-/*****************************************************/
-void *Reflector(void *threadarg)
-{
- int ioctl_s;
- struct thread_data *my_data;
- my_data = (struct thread_data *)threadarg;
- struct in_addr multicastaddress_in; //IPv4 multicast address from command line
- struct in_addr multicastaddress_out;
- struct sockaddr_in6 tmp_saddr6;
- struct ifreq ifr;
- struct ipaddr_str buf;
- int mcdataport4; //IPv4 multicast port 1
- int mcdataport; //IPv4 multicast port 2
-
- /*define variables*/
-
- int mcdatarecvfd4; //multicast data receive socket side 1
- int mcdatarecvfd; //multicast data receive socket side 2
-
-
- int sendfd4; //local send socket IPv4 side 1
- int sendfd; //local send socket IPv4 side 2
-
- int ttl1; //time to live IPv4 side 1
- int ttl2; //time to live IPv4 side 2
- struct sockaddr_in mcdataaddr4; //reception IPv4 sockaddr
- struct sockaddr_in mcdataaddr; //reception IPv44 sockaddr
-
-
- char myhostnameipaddress4[20]; // IPv4 reflector's address string
- char myhostnameipaddress[20]; // IPv44 reflector's address string
- char addressstring4[20]; // IPv4 address string
- char addressstring[20]; // IPv44 address string
-
- struct sockaddr_in localsendaddr4; //IPv4 address of outgoing packets interface 1
- struct sockaddr_in localsendaddr; //IPv4 address of outgoing packets interface 2
-
- struct sockaddr_in sourceaddr4; //IPv4 address of incoming packets interface 1
- struct sockaddr_in sourceaddr; //IPv4 address of incoming packets interface 2
-
- struct ip_mreq mcdatareq4; //IPv4 join group structure
- struct ip_mreq mcdatareq; //IPv44 join group structure
-
-
- int mcdataaddrlen; //IPv4 multicast address length
- unsigned int sourceaddrlen; //IPv4 source address length
-
- char mcdatarecvbuf4[MSGBUF_SIZE]; //IPv4 multicast receive buffer
- char mcdatarecvbuf[MSGBUF_SIZE]; //IPv44 multicast receive buffer
-
-
-
- fd_set readfds; // file descriptors set
- int maxfds; // max number of file descriptors
- int nfds;
- int nr; // number of bytes read with recvfrom
- int ns; // number of bytes sent with sendto
- int chksrc; // asserts if source address is not the reflector's one
- int debugon=1;
- int n2;
- char inputbuf[32];
-
- /* IPv4 multicast address */
- if((inet_pton(AF_INET,my_data->multicast_addr1,&multicastaddress_in.s_addr))!=1) {
- printf("bad multicast IPv4 address format\n");
- exit (1);
- }
-
- //printf("multicastaddress side 1 v4 =%s\n",my_data->multicast_addr1);
- /* IPv4 multicast address */
- if((inet_pton(AF_INET,my_data->multicast_addr2,&multicastaddress_out.s_addr))!=1) {
- printf("bad multicast IPv4 address format\n");
- exit (1);
- }
-
- //printf("multicastaddress side 2 v4 =%s\n",my_data->multicast_addr2);
-
-
- /* IPv4 multicast ports */
-
- mcdataport4 = my_data->port1;
- mcdataport = my_data->port2;
-
-
- /* Time to live for IPv4 multicast */
- ttl1 = my_data->ttl1;
-
- /* Time to live for IPv4 multicast */
- ttl2 = my_data->ttl2;
-
- IP_VERSION=4;
-
- if (IP_VERSION==4 ) { //
- ioctl_s = socket(AF_INET, SOCK_DGRAM, 0);
-
- if (ioctl_s < 0) {
- syslog(LOG_ERR, "ioctl socket: %m");
- exit (0);
- }
-
- /* INTERFACE 1 */
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface1, IFNAMSIZE);
-
- /* Check interface address (IPv4) */
- if(ioctl(ioctl_s, SIOCGIFADDR, &ifr) < 0) {
- printf( "\tCould not get address of interface 1 - removing it\n");
- exit(0);
- }
-
- sockaddr4_to_string(&myhostnameipaddress4, &ifr.ifr_addr);
-
- /* INTERFACE 2 */
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface2, IFNAMSIZE);
-
- /* Check interface address (IPv4) */
- if(ioctl(ioctl_s, SIOCGIFADDR, &ifr) < 0) {
- printf( "\tCould not get address of interface 2 - removing it\n");
- exit(0);
- }
-
- sockaddr4_to_string(&myhostnameipaddress, &ifr.ifr_addr);
- } else {
- /* Global address mode */
- int ipv6_addrtype = 0; /* global */
- /* Get IPV6 GLOBAL interface address */
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface2, IFNAMSIZE);
-
- if(get_ipv6_address(ifr.ifr_name, &tmp_saddr6, ipv6_addrtype ) <= 0) {
- printf( "\tCould not find site-local IPv6 address for %s\n", ifr.ifr_name);
- }
-
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface2, IFNAMSIZE);
-
- // printf("\n Adding interface : %s \n", my_data->interface2);
- /* Get IPV6 GLOBAL interface address */
- if(get_ipv6_address(ifr.ifr_name, &tmp_saddr6, ipv6_addrtype ) <= 0) {
- printf( "\tCould not find site-local IPv6 address for %s\n", ifr.ifr_name);
- }
- }
-
- /* Structures initialization */
-
- /*enter the address/port data into the mcdataaddr structure for IPv4*/
- bzero((char *) &mcdataaddr4, sizeof(mcdataaddr4));
- mcdataaddr4.sin_family=AF_INET;
- mcdataaddr4.sin_addr.s_addr = multicastaddress_in.s_addr;
- mcdataaddr4.sin_port = htons(mcdataport4);
-
- /*enter the address/port data into the mcdataaddr structure for IPv4*/
- bzero((char *) &mcdataaddr, sizeof(mcdataaddr));
- mcdataaddr.sin_family=AF_INET;
- mcdataaddr.sin_addr.s_addr = multicastaddress_out.s_addr;
- mcdataaddr.sin_port = htons(mcdataport);
-
-
- /*enter the address/port data into the localsendaddr structure for IPv4*/
- bzero((char *) &localsendaddr4, sizeof(localsendaddr4));
- localsendaddr4.sin_family=AF_INET;
- inet_pton(AF_INET, myhostnameipaddress4 , &localsendaddr4.sin_addr.s_addr);
- localsendaddr4.sin_port = htons(0);
- //LL
- // inet_ntop(AF_INET, &localsendaddr4.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- // printf("threaded function local sender addr side 1=%s \t",addressstring);
-
- /*enter the address/port data into the localsendaddr structure for IPv4*/
- bzero((char *) &localsendaddr, sizeof(localsendaddr));
- localsendaddr.sin_family=AF_INET;
- inet_pton(AF_INET, myhostnameipaddress , &localsendaddr.sin_addr.s_addr);
- localsendaddr.sin_port = htons(0);
- //LL
- // inet_ntop(AF_INET, &localsendaddr.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- // printf("threaded function local sender addr side 2=%s\n", addressstring);
-
- /*enter the address/port data into the mcdatareq structure for IPv4*/
- bzero((char *) &mcdatareq4, sizeof(mcdatareq4));
- // mcdatareq4.imr_interface.s_addr=htonl(INADDR_ANY); < force to add a multicast route
- inet_pton(AF_INET, myhostnameipaddress4 ,&mcdatareq4.imr_interface.s_addr );
- mcdatareq4.imr_multiaddr.s_addr=multicastaddress_in.s_addr;
- // inet_pton(AF_INET, myhostnameipaddress4 , &mcdatareq4.imr_interface.s_addr);
-
-
-
- /*enter the address/port data into the mcdatareq structure for IPv4*/
- bzero((char *) &mcdatareq, sizeof(mcdatareq));
- inet_pton(AF_INET, myhostnameipaddress ,&mcdatareq.imr_interface.s_addr );
- // mcdatareq.imr_interface.s_addr=htonl(INADDR_ANY);
- mcdatareq.imr_multiaddr.s_addr=multicastaddress_out.s_addr;
-
- /*get the sendfd socket linked to the first address of the current host */
- if ((sendfd4 = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open sendfd socket!");
- exit (1);
- }
-
- if (bind(sendfd4, (struct sockaddr *) &localsendaddr4, \
- sizeof(localsendaddr4)) < 0) {
-
- perror("can't bind localsendaddr v4 to socket!");
- exit(1);
- }
-
- /*get the sendfd socket linked to the first address of the current host*/
- if ((sendfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open sendfd socket!");
- exit (1);
- }
-
- if (bind(sendfd, (struct sockaddr *) &localsendaddr, \
- sizeof(localsendaddr)) < 0) {
- perror("can't bind localsendaddr v4 side 2 to socket!");
- exit(1);
- }
-
- if ((mcdatarecvfd4 = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open mcdatarecvfd4 socket!");
- exit(1);
- }
-
- /*allow multiple processes per host to read from IPv4 sockets side 2*/
- if (setsockopt(mcdatarecvfd4, SOL_SOCKET, SO_REUSEADDR, &mcdataaddr4, sizeof(mcdataaddr4)) < 0) {
- perror("SO_REUSEADDR setsockopt v4\n");
- }
-
- if (bind(mcdatarecvfd4, (struct sockaddr *) &mcdataaddr4, \
- sizeof(mcdataaddr4)) < 0) {
- inet_ntop(AF_INET, &mcdataaddr4.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- printf("with address of bind %s\n", addressstring);
- perror("can't bind mcdataaddr v4 to socket!");
- exit(1);
- }
-
-
- if (multicastaddress_out.s_addr!=multicastaddress_in.s_addr) {
- //multicast data receive socket side 2
- /*get a mcdatarecvfd socket, bind to address for IPv4*/
- if ((mcdatarecvfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open mcdatarecvfd4 socket!");
- exit(1);
- }
-
- /*allow multiple processes per host to read from IPv4 sockets side 2*/
- if (setsockopt(mcdatarecvfd, SOL_SOCKET, SO_REUSEADDR, &mcdataaddr, sizeof(mcdataaddr)) < 0) {
- perror("SO_REUSEADDR setsockopt v4\n");
- }
-
- if (bind(mcdatarecvfd, (struct sockaddr *) &mcdataaddr, \
- sizeof(mcdataaddr)) < 0) {
- perror("can't bind mcdataaddr v4 side 2 to socket!");
- exit(1);
- }
-
- } else {
- mcdatarecvfd= mcdatarecvfd4;
- }
-
- /*set socket options to join multicast group in IPv4*/
- if (setsockopt(mcdatarecvfd4, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mcdatareq4,\
- sizeof(mcdatareq4)) < 0) {
- perror("can't set socket options to join multicast group data v4 side 1!");
- exit(1);
- }
-
-
- /*set socket options to join multicast group in IPv4*/
- if (setsockopt(mcdatarecvfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mcdatareq,\
- sizeof(mcdatareq)) < 0) {
- perror("can't set socket options to join multicast group data v4 side 2!");
- exit(1);
- }
-
- /*now set multicast socket TTL option for IPv4*/
- if (setsockopt(sendfd4, IPPROTO_IP, IP_MULTICAST_TTL, \
- &ttl1, sizeof(ttl1)) < 0)
- perror("can't set multicast ttl v4 socket option!");
-
- /*now set multicast socket TTL option for IPv4*/
- if (setsockopt(sendfd, IPPROTO_IP, IP_MULTICAST_TTL, \
- &ttl2, sizeof(ttl2)) < 0)
- perror("can't set multicast ttl v4 socket option!");
-
-
- /*define the sizes of the address structures*/
- mcdataaddrlen=sizeof(mcdataaddr4);
- sourceaddrlen=sizeof(sourceaddr4);
-
- /*start infinite while loop*/
- /*and check for activity on sockets*/
-
- /*set up the select sytem call parameters*/
- /*zero out the readfds and writefds lists, then add*/
- /*the file descriptors of interest*/
- while(1) {
-
- FD_ZERO(&readfds);
- FD_SET(mcdatarecvfd4, &readfds);
- FD_SET(mcdatarecvfd, &readfds);
-
- if (debugon >= 1) {
- FD_SET(0, &readfds);
- }
-
- maxfds = mcdatarecvfd4 + 5;
- /*check for activity*/
- nfds = select(maxfds, &readfds, NULL, NULL, NULL);
-
- /*if specified on the command line, check for input on stdin*/
- if (debugon >= 1) {
- if (FD_ISSET(0, &readfds)) {
- n2 = read(0,inputbuf, sizeof(inputbuf));
- inputbuf[n2>0? n2-1: 0] = '\0';
-
- if (!strcmp(inputbuf,"q")) {
- programshutdown();
- }
- }
-
- fflush(stdout);
- }
-
-
- /*1:receive from IPv4, send on IPv44 - data*/
- if (FD_ISSET(mcdatarecvfd4, &readfds)) {
- nr = recvfrom(mcdatarecvfd4, mcdatarecvbuf4, MSGBUF_SIZE, 0, (struct sockaddr *) \
- &sourceaddr4, &sourceaddrlen);
-
- if (debugon >= 2) {
- inet_ntop(AF_INET, &sourceaddr4.sin_addr.s_addr, addressstring4 , sizeof(addressstring4));
- printf("\nreading from mcdatarecvfd4, got data from %s\n", addressstring4);
- }
-
- if (sourceaddr4.sin_addr.s_addr == localsendaddr4.sin_addr.s_addr) {
- chksrc = 0;
-
- if (debugon >= 2)
- printf("don't retransmit multicastv4 sourced from gateway machine\n");
- } else {
- chksrc = 1;
-
- if (debugon >= 2)
- printf("retransmit to multicast address\n");
- }
-
- if (chksrc) {
- if (nr < 0)
- printf ("mcdatarecvfd4:recvfrom over multicast v4 address error!(1)\n");
-
- /*now send to IPv4*/
- if (multicastaddress_out.s_addr != INADDR_ANY) {
- if (debugon >= 2) {
- inet_ntop(AF_INET, &mcdataaddr.sin_addr.s_addr,addressstring4 ,sizeof(addressstring4));
- printf("sending to %s\n", addressstring4);
- }
-
- ns = sendto(sendfd, mcdatarecvbuf4, nr, 0, (struct sockaddr *)&mcdataaddr, \
- sizeof(mcdataaddr));
- } else {
- if (debugon >= 2) printf("not resending to ORIGINATOR! or array entry = 0\n");
- }
- }
- }
-
-
-
- /*2:receive from IPv4 side 2, send on IPv44 side 1 - data*/
- if (FD_ISSET(mcdatarecvfd, &readfds)) {
- nr = recvfrom(mcdatarecvfd, mcdatarecvbuf, MSGBUF_SIZE, 0, (struct sockaddr *) \
- &sourceaddr, &sourceaddrlen);
-
- if (debugon >= 2) {
- inet_ntop(AF_INET, &sourceaddr.sin_addr.s_addr, addressstring , sizeof(addressstring));
- printf("\nreading from mcdatarecvfd side 2, got data from %s\n", addressstring);
- }
-
- if (sourceaddr.sin_addr.s_addr == localsendaddr.sin_addr.s_addr) {
- chksrc = 0;
-
- if (debugon >= 2)
- printf("don't retransmit multicastv4 sourced from gateway machine\n");
- } else {
- chksrc = 1;
-
- if (debugon >= 2)
- printf("retransmit to multicast address side 1\n");
- }
-
- if (chksrc) {
- if (nr < 0)
- printf ("mcdatarecvfd:recvfrom over multicast v4 address error!(1)\n");
-
- /*now send to IPv4*/
- if (multicastaddress_in.s_addr != INADDR_ANY) {
- if (debugon >= 2) {
- inet_ntop(AF_INET, &mcdataaddr4.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- printf("sending to %s\n", addressstring);
- }
-
- ns = sendto(sendfd4, mcdatarecvbuf, nr, 0, (struct sockaddr *)&mcdataaddr4, \
- sizeof(mcdataaddr4));
- } else {
- if (debugon >= 2) printf("not resending to ORIGINATOR! or array entry = 0\n");
- }
- }
- }
- } //end of while loop
-
-}
-
-
-/*****************************************************/
-int
-main (argc, argv)
-int argc;
-char **argv;
-{
- char interface1[11], interface2[11];
- int ttl1; //time to live side1
- int ttl2; //time to live side 2
- struct couple {
- char multicast_addr1[41]; /* address multicast for the group side 1 */
- char multicast_addr2[41]; /* address multicast for the group side 2 */
- };
- int nb_port_range;
- int nb_multicast_couple;
- int ip_version, ip_version2;
- int displayon=0;
- struct couple *multi_group;
-
- int i,j, k, rc,port;
- pthread_t threads[NUM_THREADS];
- struct port_range {
- int port_begin;
- int port_end;
- };
- struct port_range *prt_range;
-
- if (argc < 12) {
- fprintf (stderr, "Error in the syntax\n");
- exit(1);
- }
-
- strcpy(interface1,argv[1]);
- strcpy(interface2,argv[2]);
- ip_version= atoi(argv[3]);
- ip_version2=atoi(argv[4]);
- /* Time to live for IPv4 multicast */
- ttl1 = atoi(argv[5]);
-
-
- /* Time to live for IPv4 multicast */
- ttl2 = atoi(argv[6]);
- nb_multicast_couple=atoi(argv[7]);
-
- if (nb_multicast_couple !=0) {
- if ((multi_group=(struct couple *)malloc(nb_multicast_couple*sizeof(struct couple)))==NULL) {
- printf("Memory problem to allocate struct couple !\n") ;
- exit (1);
- }
-
- for (i=0; i <nb_multicast_couple; i++) {
-
- strcpy(multi_group[i].multicast_addr1,argv[8+2*i]);
- strcpy(multi_group[i].multicast_addr2,argv[8+2*i +1]);
- }
- } else {
- exit(0);
- }
-
- nb_port_range=atoi(argv[8 + nb_multicast_couple*2]);
-
- if (nb_port_range !=0) {
-
-
- if ((prt_range=(struct port_range *)malloc(nb_port_range*sizeof(struct port_range)))==NULL) {
- printf("Memory problem to allocate struct port !\n") ;
- exit (1);
- }
-
- for (i=0; i <nb_port_range; i++) {
-
- prt_range[i].port_begin= atoi(argv[8+1 + nb_multicast_couple*2+2*i]);
- prt_range[i].port_end = atoi(argv[8+1 + nb_multicast_couple*2+2*i +1]);
- }
- } else {
- exit(0);
- }
-
- k=0;
- printf( "Multicast state : for interface %s and interface %s for %d multicast group(s) on %d port range(s) \n", interface1, interface2, nb_multicast_couple, nb_port_range);
-
- for (i=0; i <nb_multicast_couple; i++) {
-
- for(j=0; j <nb_port_range; j++) {
-
- for (port= prt_range[j].port_begin; port <=prt_range[j].port_end; port++) {
- strcpy (thread_data_array[k].interface1, interface1);
- strcpy (thread_data_array[k].interface2, interface2);
- thread_data_array[k].ttl1=ttl1;
- thread_data_array[k].ttl2=ttl2;
- strcpy (thread_data_array[k].multicast_addr1, multi_group[i].multicast_addr1);
- strcpy (thread_data_array[k].multicast_addr2, multi_group[i].multicast_addr2);
- thread_data_array[k].thread_id=k;
- thread_data_array[k].port1=port;
- thread_data_array[k].port2=port;
-
- if (displayon >= 1) printf("Creating thread %d for group %d for port %d\n", k,i ,port);
-
- rc=pthread_create(&threads[k], NULL, Reflector, (void *)&thread_data_array[k]);
-
- if (rc) {
- printf("Error; return code from pthreade_create() is %d\n", rc);
- exit(-1);
- }
-
- k=k+1;
-
- if (k> NUM_THREADS) {
- printf("Number of created threads over the fixed limited!" );
- exit(-1);
- }
- }
- }
- }
-
- pthread_exit(NULL);
-}
-
-int programshutdown ()
-{
- exit (1);
-}
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector_launch.pl b/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector_launch.pl
deleted file mode 100755
index 8a5a96802337e6afbde2d16bfc781eb1ff5516a2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector_launch.pl
+++ /dev/null
@@ -1,75 +0,0 @@
-#!/usr/bin/perl -w
-use Switch;
-
-$dir = $ARGV[0];
-$file = $ARGV[1];
-
-$nb_groupes = `grep groupes $ARGV[0]|wc -l|sed \'s/ //g\'`;
-$nb_plages = `grep port $ARGV[0]|wc -l|sed \'s/ //g\'`;
-chomp($nb_plages);
-chomp($nb_groupes);
-
-#les structures dans lesquelles on stocke les données
-@groupes=();
-@ports=();
-@int_1=();
-@int_2=();
-@ipv_1=();
-@ipv_2=();
-@ttl_1=();
-@ttl_2=();
-
-#on compte le nombre de lignes, pour signaler l'erreur
-$num_ligne = 0;
-
-
-open(fFile, "< $file") or die "cannot open file $file";
-while($line = <fFile>){
- $num_ligne++;
- #on ignore les lignes commentées ou vides
- if ((substr ($line,0,1) ne "#") && ($line =~ /=/)) {
- @ligne=split("=", $line);
- #si l'argument est vide, alors le programme sort avec une erreur
- chomp($ligne[1]);
- if(!length($ligne[1])){
- printf "Erreur dans le fichier de conf à la ligne $num_ligne.\n";
- exit;
- }
-
- #on met les données dans les structures adéquates
- switch ($ligne[0]){
- case "int_1" {push(@int_1,$ligne[1])}
- case "int_2" {push(@int_2,$ligne[1])}
- case "ipv_1" {push(@ipv_1,$ligne[1])}
- case "ipv_2" {push(@ipv_2,$ligne[1])}
- case "ttl_1" {push(@ttl_1,$ligne[1])}
- case "ttl_2" {push(@ttl_2,$ligne[1])}
- case "groupes" {push(@groupes,$ligne[1])}
- case "ports" {push(@ports,$ligne[1])}
- }
-
- }
-
-}
-close(fFile);
-
-#On construit la commande et on l'affiche
-$commande = "$dir/reflector $int_1[0] $int_2[0] $ipv_1[0] $ipv_2[0] $ttl_1[0] $ttl_2[0]";
-
-#on rajoute le nb de groupes et les groupes
-$commande = $commande." ".@groupes;
-foreach $groupe (@groupes){
- @couple = split (",", $groupe);
- $commande = $commande." $couple[0] $couple[1]";
-}
-
-#on rajoute le nb de ports et les ports
-$commande = $commande." ".@ports;
-foreach $port (@ports){
- @couple = split (",", $port);
- $commande = $commande." $couple[0] $couple[1]";
-}
-
-$commande = $commande."\n";
-
-system($commande);
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_outdoor.sh
deleted file mode 100755
index 4ff1ed8c479e0e014d60c63932c94f75f393c3c3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,97 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-
-echo Clusterhead address is $CH1_IN6_ADDR
-
-
-echo Launching AS and RF
-./start_openair.sh 8 0
-
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-## Est ce bon ?
-#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
-
-
-#CH1<-> MR1 multicast (rajout THC)
-echo EADS Multicast for CH1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
-
-
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-#CH1<-> MR2 (MPLS PMIP signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
-#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
-
-
-#CH1<-> MR2 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
-
-
-
-#CH Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH<-> MR1 Imulticast
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
-#CH<-> MR2 (IP Signaling)
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
-#CH<-> MR2 (MPLS user-plane bearer)
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.1/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" > /sys/mpls/debug
-
-echo Multicast state launched with config_ch1
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch1 &
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_parking.sh
deleted file mode 100755
index 5de358731d2f47ea417717d4730712901ba53e6f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,97 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-
-echo Clusterhead address is $CH1_IN6_ADDR
-
-
-echo Launching AS and RF
-./start_openair.sh 6 0
-
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-## Est ce bon ?
-#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
-
-
-#CH1<-> MR1 multicast (rajout THC)
-echo EADS Multicast for CH1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
-
-
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-#CH1<-> MR2 (MPLS PMIP signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
-#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
-
-
-#CH1<-> MR2 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
-
-
-
-#CH Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH<-> MR1 Imulticast
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
-#CH<-> MR2 (IP Signaling)
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
-#CH<-> MR2 (MPLS user-plane bearer)
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.1/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" > /sys/mpls/debug
-
-echo Multicast state launched with config_ch1
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch1 &
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor.sh
deleted file mode 100755
index 42e6b96979f5e40b6b6bc36798c92a5a8c5b4989..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_outdoor.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor_nopmip.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor_nopmip.sh
deleted file mode 100755
index d8d08cbe183e10ac6d49da2586f4dae6e6f36abb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor_nopmip.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_outdoor.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking.sh
deleted file mode 100755
index f83c8f80945d5c21937f3a2c0bc4980124271f67..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_parking.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking_no_pmip.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking_no_pmip.sh
deleted file mode 100755
index fe90f0773042da469bd2b4a8be3f4f24d924569a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking_no_pmip.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_parking.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-#echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_outdoor.sh
deleted file mode 100755
index e973be1b5805db17ca5ba483010ab21d1028d16b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-echo ClusterHead address is $CH2_IN6_ADDR
-echo Launching AS and RF
-./start_openair.sh 8 1
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
-#CH2<-> MR2 MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 21
-#CH2<-> MR2 MPLS Signaling - For com between MN3 and MN2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN2_CH2_MR2_MN3 -m $MN3_MR2_CH2_MN2 -r 21
-
-
-#CH2<-> MR2 Imulticast
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 20
-
-
-
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
-#CH2<-> MR3 (MPLS for com between MN2 and MN3)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MN3_CH2_MR3_MN2 -m $MN2_MR3_CH2_MN3 -r 29
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 28
-
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.2/24 dev nasmesh0
-sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch2 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_parking.sh
deleted file mode 100755
index e973be1b5805db17ca5ba483010ab21d1028d16b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-echo ClusterHead address is $CH2_IN6_ADDR
-echo Launching AS and RF
-./start_openair.sh 8 1
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
-#CH2<-> MR2 MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 21
-#CH2<-> MR2 MPLS Signaling - For com between MN3 and MN2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN2_CH2_MR2_MN3 -m $MN3_MR2_CH2_MN2 -r 21
-
-
-#CH2<-> MR2 Imulticast
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 20
-
-
-
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
-#CH2<-> MR3 (MPLS for com between MN2 and MN3)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MN3_CH2_MR3_MN2 -m $MN2_MR3_CH2_MN3 -r 29
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 28
-
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.2/24 dev nasmesh0
-sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch2 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_outdoor.sh
deleted file mode 100755
index 5528993a32f52c1fbc85773af4f85e76829efd8e..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-#CH2_NAS.SH
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas_barca_outdoor.sh
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-
-#CH1->MR2->CH2
-echo 'CH1->MR2->CH2'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
-echo "Creating routes from CH2 to CH1"
-sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
-
-#MN3->MN2
-./mpls_nas.sh $MN3_MR2_CH2_MN1 $MR3_IN6_ADDR $MN3_CH2_MR3_MN2
-#MN2->MN3
-./mpls_nas.sh $MN2_MR3_CH2_MN3 $MR2_IN6_ADDR2 $MN1_CH2_MR2_MN3
-
-
-echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-#sudo xterm -hold -e "$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR" &
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_parking.sh
deleted file mode 100755
index ecc50e0621e33dd11edd5d5d53837025c5e7bdc4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_parking.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/bash
-#CH2_NAS.SH
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas_barca_parking.sh
-
-echo "0" > /sys/mpls/debug
-#MN1->MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-
-echo "0" > /sys/mpls/debug
-#CH1->MR2->CH2
-echo 'CH1->MR2->CH2'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
-echo "Creating routes from CH2 to CH1"
-sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
-
-#MN3->MN2
-./mpls_nas.sh $MN3_MR2_CH2_MN1 $MR3_IN6_ADDR $MN3_CH2_MR3_MN2
-#MN2->MN3
-./mpls_nas.sh $MN2_MR3_CH2_MN3 $MR2_IN6_ADDR2 $MN1_CH2_MR2_MN3
-
-
-echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-#sudo xterm -hold -e "$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR" &
-
-watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/del_mpls.sh b/openair3/EXAMPLES/BARCA_TRIALS/del_mpls.sh
deleted file mode 100755
index 1daef35dd8b479d35b94e0a571e4ff32f7def5c6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/del_mpls.sh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/bash
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by phil, Huu Nghia, 8 July 08
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mpls_nas.sh b/openair3/EXAMPLES/BARCA_TRIALS/mpls_nas.sh
deleted file mode 100755
index eb6bb742af16a35504835b60c1ce534bd1347cf3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS
-sudo modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- sudo mpls labelspace set dev nasmesh0 labelspace 0
- sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_outdoor.sh
deleted file mode 100755
index d7e3a94732e0bbacc35619bc48727a8efbbc80ca..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 8 8
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.1.3
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.3
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr1
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
-
-
-
-
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_parking.sh
deleted file mode 100755
index c54cebc5401fdb1a97a461030e6a7addf9a4ecff..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 6 8
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.1.3
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.3
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr1
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
-
-
-
-
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_room_nopmip.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_room_nopmip.sh
deleted file mode 100755
index 7e3707c46aa55d506bbdebf8d174928dc371c314..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_room_nopmip.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 0 8
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.1.3
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.3
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr1
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
-
-
-
-
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_mpls_nas_barca.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_mpls_nas_barca.sh
deleted file mode 100755
index 8942cec6a1ac13c697fcec50398e4d4a3d530a73..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_mpls_nas_barca.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr1
-
-echo "0" > /sys/mpls/debug
-
-# MN1 <-> MN3
-echo 'MN3->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN3_CH1_MR1_MN1 labelspace 0 proto ipv6
-echo 'MN1->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN1_MR1_CH1_MN3 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes from MN1 to MN3"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth0
-
-# MN1 <-> MN2
-echo 'MN2->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes from MN1 to MN2"
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor.sh
deleted file mode 100755
index 538b86d4c1cc642cae814cf81cbde9f2b3360481..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_outdoor.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor_nopmip.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor_nopmip.sh
deleted file mode 100755
index 3ca9b5bf042519c458bedb5f43baf45c93f18d34..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor_nopmip.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_outdoor.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking.sh
deleted file mode 100755
index 6e33e80d59383e0e1f2c4084bf01b227f03e76dd..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_parking.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking_NOPMIP.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking_NOPMIP.sh
deleted file mode 100755
index 8318eeddcadba5029fd9304a3a8351cacc909ae4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking_NOPMIP.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_parking.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_room_nopmip.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_room_nopmip.sh
deleted file mode 100755
index 8cd86c07be4e3d6f0f2f976e776951ebf810f40a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_room_nopmip.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_room_nopmip.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_outdoor.sh
deleted file mode 100755
index b64fdc575f5ca67317ce14084362c008a24fb413..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 8 9
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.4
-sudo ifconfig eth0 10.0.3.3
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-# Com between MR2 <-> CH1
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-
-
-# Com between MR2 <-> CH2
-#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
-
-
-echo Multicast state launched with config_mr2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_parking.sh
deleted file mode 100755
index 63fe84f6009f13463343740636f73758b1864c18..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 5 9
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.4
-sudo ifconfig eth0 10.0.3.3
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-# Com between MR2 <-> CH1
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-
-
-# Com between MR2 <-> CH2
-#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
-
-
-echo Multicast state launched with config_mr2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_mpls_nas_barca.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_mpls_nas_barca.sh
deleted file mode 100755
index 73988ccaf5f22114e57a1f4eaebf511b16d60ceb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_mpls_nas_barca.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
-#MN2->MN1
-./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
-
-#CH1->CH2
-./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
-#CH2->CH1
-./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
-
-#MN3->MN1
-var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH1_MN1 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-sudo ip -6 route add $MN3_IN6_ADDR/128 dev eth0
-#MN1->MN3
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN1_CH1_MR2_MN3 labelspace 0 proto ipv6
-
-#MN3->MN2
-var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH2_MN2 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-#MN2->MN3
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN2_CH2_MR2_MN3 labelspace 0 proto ipv6
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor.sh
deleted file mode 100755
index 31861dc030bd75c7f6eb7013e46a2244da164261..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_outdoor.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor_nopmip.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor_nopmip.sh
deleted file mode 100755
index bc865a7b21734103c2c837086caa1da0d0c61521..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor_nopmip.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_outdoor.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking.sh
deleted file mode 100755
index 1d8ecbb084ae130f6bab49f376ec31b98f098e2e..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_parking.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking_NOPMIP.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking_NOPMIP.sh
deleted file mode 100755
index a4aa2b256ef678958dc55fc19407a81d46db03d0..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking_NOPMIP.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_parking.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca.sh
deleted file mode 100755
index 59facdc7404c5e8403d9fb22a7bd79952957b461..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 1 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr3
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_outdoor.sh
deleted file mode 100755
index b1c6635571eb33b7b8776ee2c3a1e4eb8e4a1845..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 8 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.2.5
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr3
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_parking.sh
deleted file mode 100755
index 94384ed06575ac7dc6a1a88a7c4bca9d0c70b48a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_parking.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 6 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.2.5
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Multicast state launched with config_mr3
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_barca.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_barca.sh
deleted file mode 100755
index a9582507cde029be9a789892fa8d58268c7ac393..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_barca.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr3
-
-echo "0" > /sys/mpls/debug
-
-
-echo 'MN1->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-
-
-
-echo 'MN3->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
-
-
-echo 'MN2->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_nas_barca.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_nas_barca.sh
deleted file mode 100755
index a9582507cde029be9a789892fa8d58268c7ac393..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_nas_barca.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr3
-
-echo "0" > /sys/mpls/debug
-
-
-echo 'MN1->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-
-
-
-echo 'MN3->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
-
-
-echo 'MN2->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca.sh
deleted file mode 100755
index a0692f05909a12c1b13ac32dc77c51c16cdd2ef7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_outdoor.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_outdoor.sh
deleted file mode 100755
index 721e293f55853b5dda2939923e66e5d646cc9652..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca_outdoor.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_parking.sh b/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_parking.sh
deleted file mode 100755
index 061c199ac8a8a6db25e3f3a07a0fdc887caef902..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_parking.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca_parking.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/params.sh b/openair3/EXAMPLES/BARCA_TRIALS/params.sh
deleted file mode 100755
index 60f5fe158c901a701fe2c5b509bd6d09cfcb9e62..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/params.sh
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/bash
-
-MR1_IN_ADDR=10.0.1.3
-MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
-MR1_EG_ADDR=192.168.9.1
-MR1_EG6_ADDR=2001:660:5502::100
-# Flow CH1->MR1
-MR1_LABEL_IN=1001
-# Flow MR1->CH1
-MR1_LABEL_OUT=1000
-ETH_MR1=eth0
-
-MR2_IN_ADDR=10.0.1.4
-MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
-MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
-MR2_EG6_ADDR=2001:660:5502::300
-ETH_MR2=eth0
-# Flow CH1->MR2
-MR2_CH1_LABEL_IN=2000
-# Flow MR2->CH1
-MR2_CH1_LABEL_OUT=2001
-# Flow CH2->MR2
-MR2_CH2_LABEL_IN=3001
-# Flow MR2->CH2
-MR2_CH2_LABEL_OUT=3000
-
-MR3_IN_ADDR=10.0.1.5
-MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
-MR3_EG_ADDR=192.168.10.1
-MR3_EG6_ADDR=2001:660:5502::200
-# Flow CH2->MR3
-MR3_LABEL_IN=4000
-# Flow MR3->CH2
-MR3_LABEL_OUT=4001
-ETH_MR3=eth2
-
-CH1_IN_ADDR=10.0.1.1
-CH2_IN_ADDR=10.0.1.2
-
-CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
-CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
-
-## Communication between the CHs
-CH1_MR2_CH2_LABEL_IN=8001
-CH1_MR2_CH2_LABEL_OUT=8000
-CH2_MR2_CH1_LABEL_IN=9001
-CH2_MR2_CH1_LABEL_OUT=9000
-
-## Com between MN1 and MN3
-MN1_MR1_CH1_MN3=1500
-MN3_CH1_MR1_MN1=1501
-MN1_CH1_MR2_MN3=2500
-MN3_MR2_CH1_MN1=2501
-
-## Com between MN2 and MN3
-MN3_MR2_CH2_MN2=3500
-MN2_CH2_MR2_MN3=3501
-MN3_CH2_MR3_MN2=4500
-MN2_MR3_CH2_MN3=4501
-
-#MN1_IN6_ADDR=2001:660:5502::20
-#MN2_IN6_ADDR=2001:660:5502::25
-MN1_IN6_ADDR=2001:660:5502::110
-MN1_IN_ADDR=192.168.9.2
-
-MN2_IN6_ADDR=2001:660:5502::210
-MN3_IN6_ADDR=2001:660:5502::310
-MN2_IN_ADDR=192.168.10.2
-
-# Put the right OPENAIR3 path here
-OPENAIR3_HOME=/root/openair_trials_2/openair3
-OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/pmip6d
-OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
-REFLECTOR_DIR=$OPENAIR3_HOME/EXAMPLES/BARCA_TRIALS/REFLECTOR
-
-# Put the right OPENAIR2 path here
-#OPENAIR2_DIR=~/openair2_r234/openair2/
-OPENAIR2_DIR=/root/openair_trials_2/openair2
-
-
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/start_openair.sh b/openair3/EXAMPLES/BARCA_TRIALS/start_openair.sh
deleted file mode 100755
index f6c1c277d9c9797713a46b3fd77503e1cb1efe8d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/start_openair.sh
+++ /dev/null
@@ -1,127 +0,0 @@
-if [ "$1" == "" ]; then
- echo "Please provide a TX power level (0-8)"
- exit
-fi
-
-if [ "$2" == "" ]; then
- echo "Please provide a Node ID (0-7 for CH, 8-15 for MR/UE)"
- exit
-fi
-
-if [ "$OPENAIR1_DIR" == "" ] ; then
- echo "Please set OPENAIR1_DIR environment variable"
- exit
-else
- echo "OPENAIR1_DIR Set to $OPENAIR1_DIR"
-fi
-
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-source ./txgains.sh
-
-case $1 in
- 0)
- CBMIMO1_POWER=$CBMIMO1_m20_dBm
- echo "Configuring CBMIMO1 for -20dBm ($CBMIMO1_POWER)"
- ;;
- 1)
- CBMIMO1_POWER=$CBMIMO1_m15_dBm
- echo Configuring CBMIMO1 for -15dBm
- ;;
- 2)
- CBMIMO1_POWER=$CBMIMO1_m10_dBm
- echo Configuring CBMIMO1 for -10dBm
- ;;
- 3)
- CBMIMO1_POWER=$CBMIMO1_m5_dBm
- echo Configuring CBMIMO1 for -5dBm
- ;;
- 4)
- CBMIMO1_POWER=$CBMIMO1_0_dBm
- echo Configuring CBMIMO1 for 0dBm
- ;;
- 5)
- CBMIMO1_POWER=$CBMIMO1_5_dBm
- echo Configuring CBMIMO1 for 5dBm
- ;;
- 6)
- CBMIMO1_POWER=$CBMIMO1_10_dBm
- echo Configuring CBMIMO1 for 10dBm
- ;;
- 7)
- CBMIMO1_POWER=$CBMIMO1_15_dBm
- echo Configuring CBMIMO1 for 15dBm
- ;;
- 8)
- CBMIMO1_POWER=$CBMIMO1_20_dBm
- echo Configuring CBMIMO1 for 20dBm
- ;;
- *)
- echo Invalid TX power
- exit
-esac
-
-
-echo Removing openair_rf,openair_l2 and openair_rrc modules
-sudo rmmod -f openair_rrc
-sudo rmmod -f openair_l2
-sudo rmmod -f openair_rf
-
-sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_l2.ko
-OARF_RET=`lsmod | grep -e openair_rf`
-
-if [ "$OARF_RET" = "" ]; then
- echo Error loading openair1 module
- exit
-fi
-
-sudo insmod $OPENAIR2_DIR/LAYER2/openair_layer2.ko
-OA2_RET=`lsmod | grep -e openair_l2`
-
-if [ "$OA2_RET" = "" ]; then
- echo Error loading openair2 module
- exit
-fi
-
-
-sudo insmod $OPENAIR2_DIR/RRC/MESH/openair_RRC.ko
-OARRC_RET=`lsmod | grep -e openair_rrc`
-if [ "$OARRC_RET" = "" ]; then
- echo Error loading openair RRC module
- exit
-fi
-
-OA_DEV="/dev/openair0"
-
-if [ -c "$OA_DEV" ]; then
- echo "$OA_DEV exists"
-else
- echo "creating $OA_DEV"
- sudo mknod $OA_DEV c 127 0
- sudo chmod a+rw /dev/openair0
-fi
-
-./openair_rf_cbmimo1 1 0
-./openair_rf_cbmimo1 1 6 $CBMIMO1_POWER
-if [ $2 -lt "8" ]; then
- ./openair_rf_cbmimo1 1 1 1 $2
-elif [ $2 -lt "16" ]; then
- ./openair_rf_cbmimo1 1 3 1 $2
-else
- echo Illegal Node ID, exiting
- exit
-fi
-
-sleep 1
-
-
-# Watch the status of the radio to check for hardware exit event
-
-#OA1_STATE=`cat /proc/openair1/openair1_state`
-
-#while [ "$OA1_STATE" != "EXITED" ]; do
-# OA1_STATE=`cat /proc/openair1/openair1_state`
-# sleep .5
-#done
-
-#./openair_rf_cbmimo1 1 4 1
-#echo CBMIMO1 Hardware exit, restarting ...
diff --git a/openair3/EXAMPLES/BARCA_TRIALS/stop_rf.sh b/openair3/EXAMPLES/BARCA_TRIALS/stop_rf.sh
deleted file mode 100755
index 96f1ea5ff7c5718a7c948ed0112cd9c6460a403f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/BARCA_TRIALS/stop_rf.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-echo STOP STARTS...
-./openair_rf_cbmimo1 1 4 1
-sleep 2
-echo STOP RF DONE
-sudo killall chbch_scope
-echo STOP CHBCH SCOPE DONE
-sudo killall sach_scope
-echo STOP_SACH SCOPE DONE
-sleep 1
-sudo rmmod nasmesh
-sleep 1
-echo REMOVE NASMESH MODULE DONE
-sudo rmmod openair_rrc
-sleep 1
-echo REMOVE RRC MODULE DONE
-sudo rmmod openair_l2
-sleep 1
-echo REMOVE LAYER2 MODULE DONE
-sudo rmmod openair_rf
-echo REMOVE RF MODULE DONE
-echo STOP FINISHED SUCCESSFULLY
diff --git a/openair3/EXAMPLES/CHORIST092008/TEMP/CH1_scripts_092008.sh b/openair3/EXAMPLES/CHORIST092008/TEMP/CH1_scripts_092008.sh
deleted file mode 100644
index e569a6bfc5769eb0ce8e165313bb3b10034085b6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/TEMP/CH1_scripts_092008.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-Cluster Head (1) – with NAS_MPLS_PMIP working
-CH1_NAS.SH
-#!/bin/bash
-#Phil, 25 july 08
-
-source params.sh
-./ch1_conf_nas.sh
-#MN1ïƒ MN2
-./ch1_mpls_nas.sh $MR1_LABEL_OUT $MR2_IN_ADDR $MR2_LABEL_IN
-#MN2ïƒ MN1
-./ch1_mpls_nas.sh $MR2_LABEL_OUT $MR1_IN_ADDR $MR1_LABEL_IN
-echo /openair3/pmip6d/pmip6d -c -L $CH1_ADDR
-/openair3/pmip6d/pmip6d -c -L $CH1_ADDR
-./ch1_del_mpls.sh
-CH1_CONF_NAS.SH
-#!/bin/bash
-
-source params.sh
-echo Clusterhead address is $CH_ADDR
-
-# Installing NASMESH driver
-rmmod -f nasmesh
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH1_ADDR -y $MR1_IN_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_LABEL_IN -m $MR2_LABEL_OUT -r 21
-
-#CH1 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_ADDR -y ff02::1 -r 3
-
-echo Configuring interfaces on CH
-# Setup IPv4 multicast route for openair emulation
-route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-# Bring up openair NASMESH device and set IPv6 address
-ifconfig nasmesh0 up
-ip addr add 10.0.0.1/24 dev nasmesh0
-ip -6 addr add $CH1_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH1_ADDR
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-sleep 1
-echo Launching AS simulator
-export OPENAIR2_DIR
-xterm -hold -e sh start_openair2_ch1.sh &
-sleep 1
-
-
-CH1_MPLS_NAS.SH
-#!/bin/bash
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS for CH
-modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- mpls labelspace set dev nasmesh0 labelspace 0
- mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: ch1_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/CHORIST092008/TEMP/CH2_script_092008.sh b/openair3/EXAMPLES/CHORIST092008/TEMP/CH2_script_092008.sh
deleted file mode 100644
index 742ce12d9ed95d36dd87c997497043ef7c4327b8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/TEMP/CH2_script_092008.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-Cluster Head (2)– with NAS_MPLS_PMIP working
-CH2_NAS.SH
-#!/bin/bash
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas.sh
-#MN1ïƒ MN2
-./ch2_mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN_ADDR $MR2_LABEL_IN
-#MN2ïƒ MN1
-./ch_mpls_nas.sh $MR2_LABEL_OUT $MR2_IN_ADDR $MR2_CH2_LABEL_IN
-echo /openair3/pmip6d/pmip6d -c -L $CH2_ADDR
-/openair3/pmip6d/pmip6d -c -L $CH2_ADDR
-./ch2_del_mpls.sh
-CH2_CONF_NAS.SH
-#!/bin/bash
-
-source params.sh
-echo Clusterhead address is $CH2_ADDR
-
-# Installing NASMESH driver
-rmmod -f nasmesh
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_ADDR -y $MR2_IN_ADDR -r 12
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 13
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_ADDR -y $MR3_IN_ADDR -r 20
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 21
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_ADDR -y ff02::1 -r 3
-
-echo Configuring interfaces on CH2
-# Setup IPv4 multicast route for openair emulation
-route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-# Bring up openair NASMESH device and set IPv6 address
-ifconfig nasmesh0 up
-ip addr add 10.0.0.1/24 dev nasmesh0
-ip -6 addr add $CH2_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH2_ADDR
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-sleep 1
-echo Launching AS simulator
-export OPENAIR2_DIR
-xterm -hold -e sh start_openair2_ch2.sh &
-sleep 1
-
-
-CH2_MPLS_NAS.SH
-#!/bin/bash
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS for CH2
-modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- mpls labelspace set dev nasmesh0 labelspace 0
- mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: ch_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/CHORIST092008/TEMP/MR1_script_092008.sh b/openair3/EXAMPLES/CHORIST092008/TEMP/MR1_script_092008.sh
deleted file mode 100644
index f0ea89548b3e43134e5b49e1a34bfa9289e0bd1d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/TEMP/MR1_script_092008.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-MR1_NAS.SH
-source params.sh
-sysctl -w net.ipv6.conf.all.forwarding=1
-$OPENAIR3_SCRIPTS_PATH/mr1_conf_nas.sh
-$OPENAIR3_SCRIPTS_PATH/mr1_mpls_nas.sh
-
-sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-ifconfig eth0 promisc
-ip -6 addr add $MR1_EG_ADDR/64 dev eth0
-$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_ADDR -N $MR1_EG_ADDR -E $MR1_IN_ADDR
-$OPENAIR3_SCRIPTS_PATH/mr1_del_mpls.sh
-MR1_CONF_NAS.SH
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Installing NASMESH Driver
-rmmod -f nasmesh
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Configuring interfaces on mr1
-route add -net 224.0.0.0 netmask 240.0.0.0 dev eth4
-ifconfig nasmesh0 up
-ifconfig namsesh0 10.0.1.2
-ip -6 addr add 2001:10:0:1:7856:3412:0:2/64 dev nasmesh0
-echo Launching AS simulator
-xterm -hold -e sh start_openair2_mr1.sh &
-
-#echo "Waiting for Router ADV from CH (DTCH Broadcast test)"
-#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#while [ -z $IPv6ADR ] ; do
-# sleep 1
-# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#done
-#echo Got Router ADV : IPv6 address is $IPv6ADR
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH1_ADDR -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:2 -y $CH1_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-echo eth0 is $MR1_EG_ADDR
-#echo Starting routing ...
-#echo No MPLS debug
-#echo "1" >/sys/mpls/debug
-MR1_MPLS_NAS.SH
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe 08 july 2008
-# June 2008
-
-source params.sh
-modprobe mpls6
-echo Setting MPLS for mr1
-
-echo "0" > /sys/mpls/debug
-
-echo 'MN2->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_ADDR | grep key |cut -c 17-26`
-
-echo "Creating routes"
-ip -6 route add $MN2_ADDR/128 via $CH1_ADDR mpls $var
-ip -6 route add $MN1_ADDR/128 dev eth0
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/TEMP/MR2_092008.sh b/openair3/EXAMPLES/CHORIST092008/TEMP/MR2_092008.sh
deleted file mode 100644
index 0080655ab418d62eb86691f6dc3730f580f1623a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/TEMP/MR2_092008.sh
+++ /dev/null
@@ -1,88 +0,0 @@
-Mobile Router 2 – with NAS_MPLS_PMIP working
-MR2_NAS.SH
-source params.sh
-sysctl -w net.ipv6.conf.all.forwarding=1
-$OPENAIR3_SCRIPTS_PATH/mr2_del_mpls.sh
-$OPENAIR3_SCRIPTS_PATH/mr2_conf_nas.sh
-#$OPENAIR3_SCRIPTS_PATH/mr2_mpls_nas.sh
-#MN1ïƒ MN2
-$OPENAIR3_SCRIPTS_PATH/mr2_mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN_ADDR $MR2_CH2_LABEL_OUT
-#MN2ïƒ MN1
-$OPENAIR3_SCRIPTS_PATH/mr2_mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN_ADDR $MR1_CH1_LABEL_OUT
-#/etc/init.d/radvd status
-#/etc/init.d/radvd start
-#radvdump
-
-sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-ifconfig eth0 promisc
-ip -6 addr add $MR2_EG_ADDR/64 dev eth0
-$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH_ADDR -N $MR2_EG_ADDR -E $MR2_IN_ADDR
-$OPENAIR3_SCRIPTS_PATH/mr2_del_mpls.sh
-MR2_CONF_NAS.SH
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-rmmod -f nasmesh
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-echo Configuring interfaces on mr2
-route add -net 224.0.0.0 netmask 240.0.0.0 dev eth2
-
-ifconfig nasmesh0 up
-ifconfig nasmesh0 10.0.0.3
-ip -6 addr add 2001:10:0:1:7856:3412:0:3/64 dev nasmesh0
-
-echo Launching AS simulator
-xterm -hold -e sh start_openair2_mr2.sh &
-
-#echo Waiting for Router ADV from CH
-#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#while [ -z $IPv6ADR ] ; do
-# sleep 1
-# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#done
-#echo Got Router ADV : IPv6 address is $IPv6ADR
-
-echo Classification rules for MR2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH_ADDR -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:3 -y $CH_ADDR -r 4
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1::9a03 -y 2001:10:0:1::1 -r 4
-echo Classification rules for MR2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_LABEL_OUT -m $MR2_LABEL_IN -r 5
-
-echo eth0 is $MR1_EG_ADDR
-
-
-
-
-MR2_MPLS_NAS.SH
-#!/bin/bash
-#Script by Lamia Romdhani
-#September 2008
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-echo Setting MPLS for CH
-modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- mpls labelspace set dev nasmesh0 labelspace 0
- mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: ch_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
-
diff --git a/openair3/EXAMPLES/CHORIST092008/TEMP/Mr3_script082008.sh b/openair3/EXAMPLES/CHORIST092008/TEMP/Mr3_script082008.sh
deleted file mode 100644
index 7b24e0b1fb5d1cc2489430ad13b39cc3256f3d1c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/TEMP/Mr3_script082008.sh
+++ /dev/null
@@ -1,83 +0,0 @@
-Mobile Router 3 – with NAS_MPLS_PMIP working
-MR3_NAS.SH
-source params.sh
-sysctl -w net.ipv6.conf.all.forwarding=1
-$OPENAIR3_SCRIPTS_PATH/mr3_del_mpls.sh
-$OPENAIR3_SCRIPTS_PATH/mr3_conf_nas.sh
-$OPENAIR3_SCRIPTS_PATH/mr3_mpls_nas.sh
-
-#/etc/init.d/radvd status
-#/etc/init.d/radvd start
-#radvdump
-
-sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-ifconfig eth0 promisc
-ip -6 addr add $MR3_EG_ADDR/64 dev eth0
-$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_ADDR -N $MR3_EG_ADDR -E $MR3_IN_ADDR
-$OPENAIR3_SCRIPTS_PATH/mr3_del_mpls.sh
-MR3_CONF_NAS.SH
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-rmmod -f nasmesh
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-echo Configuring interfaces on mr3
-route add -net 224.0.0.0 netmask 240.0.0.0 dev eth2
-
-ifconfig nasmesh0 up
-ifconfig nasmesh0 10.0.0.3
-ip -6 addr add 2001:10:0:1:7856:3412:0:3/64 dev nasmesh0
-
-echo Launching AS simulator
-xterm -hold -e sh start_openair2_mr3.sh &
-
-#echo Waiting for Router ADV from CH
-#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#while [ -z $IPv6ADR ] ; do
-# sleep 1
-# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#done
-#echo Got Router ADV : IPv6 address is $IPv6ADR
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH2_ADDR -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:3 -y $CH2_ADDR -r 4
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1::9a03 -y 2001:10:0:1::1 -r 4
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
-
-echo eth0 is $MR1_EG_ADDR
-
-MR3_MPLS_NAS.SH
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-echo Setting MPLS for mr2
-echo 'MN2->MN1'
-# add label 3000 and forward the packets to mr2, for destination MN1
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_ADDR |grep key | cut -c 17-26`
-ip -6 route add $MN1_ADDR/128 via $CH2_ADDR mpls $var
-ip -6 route add $MN2_ADDR/128 dev eth0
-
-echo 'MN1->MN2'
-#pop label 1003 and do Ip lookup.
-mpls labelspace set dev nasmesh0 labelspace 0
-# MR3_LABEL_IN is 1003
-mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/ch1_conf_nas.sh b/openair3/EXAMPLES/CHORIST092008/ch1_conf_nas.sh
deleted file mode 100755
index 438b4fb931e1cec35ce6f17624f42ce871ffe18f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/ch1_conf_nas.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/bash
-
-source params.sh
-echo Clusterhead address is $CH_ADDR
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-
-#CH1 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-echo Configuring interfaces on CH
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add $CH1_IN_ADDR/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH1_IN6_ADDR
-echo No MPLS debug
-sudo sh -c 'echo "0" >/sys/mpls/debug'
-sleep 1
-echo Launching AS simulator
-export OPENAIR2_DIR
-xterm -hold -e sh start_openair2_ch1.sh &
-sleep 1
-
diff --git a/openair3/EXAMPLES/CHORIST092008/ch1_nas.sh b/openair3/EXAMPLES/CHORIST092008/ch1_nas.sh
deleted file mode 100755
index 0479c8c1412fe00e69ce26ab55fe865e53366949..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/ch1_nas.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#Cluster Head (1) – with NAS_MPLS_PMIP working
-
-#!/bin/bash
-#Phil, 25 july 08
-
-source params.sh
-./ch1_conf_nas.sh
-#MN1ïƒ MN2
-./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-#MN2ïƒ MN1
-./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-#echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR
-#$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR
-#./del_mpls.sh
diff --git a/openair3/EXAMPLES/CHORIST092008/ch2_conf_nas.sh b/openair3/EXAMPLES/CHORIST092008/ch2_conf_nas.sh
deleted file mode 100755
index bdaf8982ac1e15bf674ac1461df3709dfdab4c19..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/ch2_conf_nas.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/bash
-
-source params.sh
-echo Clusterhead address is $CH2_IN6_ADDR
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
-
-echo Configuring interfaces on CH2
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add $CH2_IN_ADDR/24 dev nasmesh0
-sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH2_IN6_ADDR
-echo No MPLS debug
-sudo sh -c 'echo "0" >/sys/mpls/debug'
-sleep 1
-echo Launching AS simulator
-export OPENAIR2_DIR
-xterm -hold -e sh start_openair2_ch2.sh &
-sleep 1
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/ch2_nas.sh b/openair3/EXAMPLES/CHORIST092008/ch2_nas.sh
deleted file mode 100755
index 00f9965c55e9bf456e442d2e01681bd680d0b9e0..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/ch2_nas.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#CH2_NAS.SH
-#!/bin/bash
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas.sh
-#MN1ïƒ MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2ïƒ MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-#echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR
-#$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR
-#./del_mpls.sh
diff --git a/openair3/EXAMPLES/CHORIST092008/del_mpls.sh b/openair3/EXAMPLES/CHORIST092008/del_mpls.sh
deleted file mode 100755
index 1daef35dd8b479d35b94e0a571e4ff32f7def5c6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/del_mpls.sh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/bash
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by phil, Huu Nghia, 8 July 08
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/CHORIST092008/dummy.txt b/openair3/EXAMPLES/CHORIST092008/dummy.txt
deleted file mode 100644
index d1e0bb02d63548f52b07db792ba4606d3c61730b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/dummy.txt
+++ /dev/null
@@ -1 +0,0 @@
-hello --
diff --git a/openair3/EXAMPLES/CHORIST092008/mn1_conf.sh b/openair3/EXAMPLES/CHORIST092008/mn1_conf.sh
deleted file mode 100755
index a1d931b525de1c1512ae2787680efba4ca25ee42..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mn1_conf.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-#Huu-Nghia, Philippe, Lamia 28 june 2008
-
-#echo Deleting MN1 autoconfigured addresse
-#$OPENAIR3_SCRIPTS_PATH/mn1_del.sh
-
-#ip -6 route add 2001:660:5502::25/128 via 2001:660:5502::10 dev eth0
-
-ip -6 addr del 2001:660:5502::15/64 dev eth0
-ip -6 addr add 2001:660:5502::15/64 dev eth0
diff --git a/openair3/EXAMPLES/CHORIST092008/mpls_nas.sh b/openair3/EXAMPLES/CHORIST092008/mpls_nas.sh
deleted file mode 100755
index eb6bb742af16a35504835b60c1ce534bd1347cf3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS
-sudo modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- sudo mpls labelspace set dev nasmesh0 labelspace 0
- sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/CHORIST092008/mr1_conf_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr1_conf_nas.sh
deleted file mode 100755
index 2a60c461b2e59bfac5b1d7f6e42669eacb2e23c7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr1_conf_nas.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Configuring interfaces on mr1
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 $MR1_IN_ADDR
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth1
-
-echo Launching AS simulator
-xterm -hold -e sh start_openair2_mr1.sh &
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr1_del_mpls.sh b/openair3/EXAMPLES/CHORIST092008/mr1_del_mpls.sh
deleted file mode 100755
index 8e6ab9e6c54a48b3d8bef9fca6690bc502e95ee2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr1_del_mpls.sh
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/bash
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by phil, Huu Nghia, 8 July 08
-ip -6 route del $MN2_ADDR/128 via $CH_ADDR
-ip -6 route del $MN1_ADDR/128 dev eth0
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/CHORIST092008/mr1_mpls_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr1_mpls_nas.sh
deleted file mode 100755
index 70bfcb34e7d2a51539307c1358083b4fde2d5f2c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr1_mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-sudo modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-sudo sh -c 'echo 0 >/sys/mpls/debug'
-
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes"
-
-
-echo Setting MPLS for mr1
-echo 'MN2->MN1'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-
-sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth1
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr1_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr1_nas.sh
deleted file mode 100755
index 74a775fb99199b82b938d6d8336e20893bbe0945..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr1_nas.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./del_mpls.sh
-./mr1_conf_nas.sh
-./mr1_mpls_nas.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth1 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth1
-#$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR
-#./del_mpls.sh
-
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr2_conf_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr2_conf_nas.sh
deleted file mode 100755
index e1e5971833e523fe280b53b0ebcd67f64b63bb3e..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr2_conf_nas.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-echo Configuring interfaces on mr2
-
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 $MR2_IN_ADDR
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-echo Launching AS simulator
-xterm -hold -e sh start_openair2_mr2.sh &
-
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-
-echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-
-
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr2_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr2_nas.sh
deleted file mode 100755
index 171f34ba07709a098124492bf6f5677c00eb6b89..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr2_nas.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-source params.sh
-sysctl -w net.ipv6.conf.all.forwarding=1
-./del_mpls.sh
-./mr2_conf_nas.sh
-#MN1ïƒ MN2
-./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
-#MN2ïƒ MN1
-./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr3_conf_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr3_conf_nas.sh
deleted file mode 100755
index 293708be0cb41c33eb3eab5a921637e68a3b54f3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr3_conf_nas.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-echo Configuring interfaces on mr3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 $MR3_IN_ADDR
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth3
-
-echo Launching AS simulator
-sudo xterm -hold -e sh start_openair2_mr3.sh &
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr3_mpls_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr3_mpls_nas.sh
deleted file mode 100755
index a1c95df3d00b58b7cfdbeddd0eab1d822c85614e..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr3_mpls_nas.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-sudo modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-sudo sh -c 'echo 0 >/sys/mpls/debug'
-
-echo Setting MPLS for mr3
-
-
-echo 'MN1->MN2'
-#pop label 4000 and do Ip lookup.
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-# add label 3000 and forward the packets to mr2, for destination MN1
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev eth3
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/mr3_nas.sh b/openair3/EXAMPLES/CHORIST092008/mr3_nas.sh
deleted file mode 100755
index 6d3bd29a5cf51be51449808cccac2b2f11919611..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/mr3_nas.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./del_mpls.sh
-./mr3_conf_nas.sh
-./mr3_mpls_nas.sh
-
-
-#/etc/init.d/radvd status
-#/etc/init.d/radvd start
-#radvdump
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth3 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth3
-#$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR
-#./del_mpls.sh
-
-
-
-
-
diff --git a/openair3/EXAMPLES/CHORIST092008/params.sh b/openair3/EXAMPLES/CHORIST092008/params.sh
deleted file mode 100644
index 6df1c1186e62ad7c64587ee647ad13ca33505d87..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/params.sh
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/bash
-MR1_IN_ADDR=10.0.1.3
-MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
-MR1_EG_ADDR=10.0.2.3
-MR1_EG6_ADDR=2001:660:5502::10
-# Flow CH1->MR1
-MR1_LABEL_IN=1001
-# Flow MR1->CH1
-MR1_LABEL_OUT=1000
-
-MR2_IN_ADDR=10.0.1.4
-MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
-MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
-MR2_EG6_ADDR=2001:660:5502::30
-# Flow CH1->MR2
-MR2_CH1_LABEL_IN=2000
-# Flow MR2->CH1
-MR2_CH1_LABEL_OUT=2001
-# Flow CH2->MR2
-MR2_CH2_LABEL_IN=3001
-# Flow MR2->CH2
-MR2_CH2_LABEL_OUT=3000
-
-MR3_IN_ADDR=10.0.1.5
-MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
-MR3_EG6_ADDR=2001:660:5502::15
-# Flow CH2->MR3
-MR3_LABEL_IN=4000
-# Flow MR3->CH2
-MR3_LABEL_OUT=4001
-
-CH1_IN_ADDR=10.0.1.1
-CH2_IN_ADDR=10.0.1.2
-
-CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
-CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
-
-MN1_IN6_ADDR=2001:660:5502::20
-MN2_IN6_ADDR=2001:660:5502::25
-
-# Put the right OPENAIR3 path here
-OPENAIR3_HOME=~/openair3
-OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/pmip6d
-OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
-
-# Put the right OPENAIR2 path here
-OPENAIR2_DIR=~/openair2_r220/
diff --git a/openair3/EXAMPLES/CHORIST092008/start_openair2_ch1.sh b/openair3/EXAMPLES/CHORIST092008/start_openair2_ch1.sh
deleted file mode 100644
index 9aba3d7dfb0d1e0266b1d0628258529f721983aa..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/start_openair2_ch1.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/CHORIST092008/start_openair2_ch2.sh b/openair3/EXAMPLES/CHORIST092008/start_openair2_ch2.sh
deleted file mode 100644
index 353e556705608bb47c95c4793f3bc125cb8624f7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/start_openair2_ch2.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m1 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/CHORIST092008/start_openair2_mr1.sh b/openair3/EXAMPLES/CHORIST092008/start_openair2_mr1.sh
deleted file mode 100755
index 3ecd3c072e3f6b2c8454fbd3ecf4bcfd8a75d975..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/start_openair2_mr1.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m2 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/CHORIST092008/start_openair2_mr2.sh b/openair3/EXAMPLES/CHORIST092008/start_openair2_mr2.sh
deleted file mode 100755
index 000edbd89f4adb1c7c2de56dc07cb79c33f0c264..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/start_openair2_mr2.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m3 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/CHORIST092008/start_openair2_mr3.sh b/openair3/EXAMPLES/CHORIST092008/start_openair2_mr3.sh
deleted file mode 100755
index 8ee1fd4f29e237f241dbee9aac88e69c8d26c1a7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CHORIST092008/start_openair2_mr3.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m4 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_conf_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_conf_nas_barca_indoor.sh
deleted file mode 100755
index 4271b154c7bed9e628018a69f43cd5b7135593ae..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_conf_nas_barca_indoor.sh
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-
-echo Clusterhead address is $CH1_IN6_ADDR
-
-
-echo Launching AS and RF
-./start_openair.sh 0 0
-
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-## Est ce bon ?
-#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
-
-
-#CH1<-> MR1 multicast (rajout THC)
-echo EADS Multicast for CH1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
-
-
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-#CH1<-> MR2 (MPLS PMIP signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
-#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
-
-
-#CH1<-> MR2 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
-
-
-
-#CH Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH<-> MR1 Imulticast
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
-#CH<-> MR2 (IP Signaling)
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
-#CH<-> MR2 (MPLS user-plane bearer)
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.1/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" > /sys/mpls/debug
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_conf_nas_barca_outdoor.sh
deleted file mode 100755
index a1a83391fc770682d8f86c0f079de5c1b1a0eed8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-
-echo Clusterhead address is $CH1_IN6_ADDR
-
-
-echo Launching AS and RF
-./start_openair.sh 8 0
-
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-## Est ce bon ?
-#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
-
-
-#CH1<-> MR1 multicast (rajout THC)
-echo EADS Multicast for CH1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
-
-
-
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-#CH1<-> MR2 (MPLS PMIP signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
-#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
-
-
-#CH1<-> MR2 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
-
-
-
-#CH Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH<-> MR1 Imulticast
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
-#CH<-> MR2 (IP Signaling)
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
-#CH<-> MR2 (MPLS user-plane bearer)
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.1/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" > /sys/mpls/debug
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_indoor.sh
deleted file mode 100755
index 0178ced49ad811cbea648aae10e8b017d8672aaf..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_indoor.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_indoor.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_outdoor.sh
deleted file mode 100755
index 42e6b96979f5e40b6b6bc36798c92a5a8c5b4989..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_outdoor.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_outdoor_nopmip.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_outdoor_nopmip.sh
deleted file mode 100755
index d8d08cbe183e10ac6d49da2586f4dae6e6f36abb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch1_nas_barca_outdoor_nopmip.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-sudo ./ch1_conf_nas_barca_outdoor.sh
-
-# MN1 -> MN2
-sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-# MN2 -> MN1
-sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-# MN1 -> MN3
-sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
-# MN3 -> MN1
-sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
-
-# CH1 -> CH2
-#echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-#echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo 0 > /sys/mpls/debug
-
-
-# PMIP
-echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_conf_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_conf_nas_barca_indoor.sh
deleted file mode 100755
index 6bf62a85288e7589c7472f03b6b5f7ac05409e30..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_conf_nas_barca_indoor.sh
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-echo ClusterHead address is $CH2_IN6_ADDR
-echo Launching AS and RF
-./start_openair.sh 2 1
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
-#CH2<-> MR2 MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 21
-#CH2<-> MR2 MPLS Signaling - For com between MN3 and MN2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN2_CH2_MR2_MN3 -m $MN3_MR2_CH2_MN2 -r 21
-
-#CH2<-> MR2 Imulticast
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 20
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
-#CH2<-> MR3 (MPLS for com between MN2 and MN3)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MN3_CH2_MR3_MN2 -m $MN2_MR3_CH2_MN3 -r 29
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 28
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.2/24 dev nasmesh0
-sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_conf_nas_barca_outdoor.sh
deleted file mode 100755
index 1a9f3ca685c26a07c8b757d073d0dbc826d44382..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-echo ClusterHead address is $CH2_IN6_ADDR
-echo Launching AS and RF
-./start_openair.sh 4 1
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
-
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
-#CH2<-> MR2 MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 21
-#CH2<-> MR2 MPLS Signaling - For com between MN3 and MN2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN2_CH2_MR2_MN3 -m $MN3_MR2_CH2_MN2 -r 21
-
-
-#CH2<-> MR2 Imulticast
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 20
-
-
-
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
-#CH2<-> MR3 (MPLS for com between MN2 and MN3)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MN3_CH2_MR3_MN2 -m $MN2_MR3_CH2_MN3 -r 29
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 28
-
-
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.2/24 dev nasmesh0
-sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
-
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_nas_barca_indoor.sh
deleted file mode 100755
index c60abe0ae5245acd827ca9ff35778a08690126dc..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_nas_barca_indoor.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/bash
-#CH2_NAS.SH
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas_barca_indoor.sh
-
-echo "0" > /sys/mpls/debug
-#MN1->MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-
-echo "0" > /sys/mpls/debug
-#CH1->MR2->CH2
-echo 'CH1->MR2->CH2'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
-echo "Creating routes from CH2 to CH1"
-sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
-
-#MN3->MN2
-./mpls_nas.sh $MN3_MR2_CH2_MN1 $MR3_IN6_ADDR $MN3_CH2_MR3_MN2
-#MN2->MN3
-./mpls_nas.sh $MN2_MR3_CH2_MN3 $MR2_IN6_ADDR2 $MN1_CH2_MR2_MN3
-
-
-echo $OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR" &
-
-watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_nas_barca_outdoor.sh
deleted file mode 100755
index edb7892f6035480f9856f20f6a0feaff92f35148..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/ch2_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-#CH2_NAS.SH
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas_barca_outdoor.sh
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-
-#CH1->MR2->CH2
-echo 'CH1->MR2->CH2'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
-echo "Creating routes from CH2 to CH1"
-sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
-
-#MN3->MN2
-./mpls_nas.sh $MN3_MR2_CH2_MN1 $MR3_IN6_ADDR $MN3_CH2_MR3_MN2
-#MN2->MN3
-./mpls_nas.sh $MN2_MR3_CH2_MN3 $MR2_IN6_ADDR2 $MN1_CH2_MR2_MN3
-
-
-echo $OPENAIR3_HOME/PMIP6D/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-sudo xterm -hold -e "$OPENAIR3_HOME/PMIP6D/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR" &
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/del_mpls.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/del_mpls.sh
deleted file mode 100755
index 1daef35dd8b479d35b94e0a571e4ff32f7def5c6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/del_mpls.sh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/bash
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by phil, Huu Nghia, 8 July 08
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mpls_nas.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mpls_nas.sh
deleted file mode 100755
index eb6bb742af16a35504835b60c1ce534bd1347cf3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS
-sudo modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- sudo mpls labelspace set dev nasmesh0 labelspace 0
- sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_conf_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_conf_nas_barca_indoor.sh
deleted file mode 100755
index 5845d939862151f746fda2dd9af27147a26e9b61..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_conf_nas_barca_indoor.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 2 8
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-#sudo ifconfig eth0 10.0.1.3
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.3
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_conf_nas_barca_outdoor.sh
deleted file mode 100755
index 81373cfe370fede1b4ee14b5477e7764091cc43a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 8 8 40
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.1.3
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.3
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_mpls_nas_barca.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_mpls_nas_barca.sh
deleted file mode 100755
index 8942cec6a1ac13c697fcec50398e4d4a3d530a73..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_mpls_nas_barca.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr1
-
-echo "0" > /sys/mpls/debug
-
-# MN1 <-> MN3
-echo 'MN3->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN3_CH1_MR1_MN1 labelspace 0 proto ipv6
-echo 'MN1->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN1_MR1_CH1_MN3 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes from MN1 to MN3"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth0
-
-# MN1 <-> MN2
-echo 'MN2->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes from MN1 to MN2"
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_indoor.sh
deleted file mode 100755
index a87e6ea303f7a9c0b01ec6e9186efcfb9674639b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_indoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_indoor.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_outdoor.sh
deleted file mode 100755
index 538b86d4c1cc642cae814cf81cbde9f2b3360481..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_outdoor.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_outdoor_nopmip.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_outdoor_nopmip.sh
deleted file mode 100755
index 3ca9b5bf042519c458bedb5f43baf45c93f18d34..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr1_nas_barca_outdoor_nopmip.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas_barca_outdoor.sh
-./mr1_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_conf_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_conf_nas_barca_indoor.sh
deleted file mode 100755
index cfc4f9ebc852902d64cfc8ab3e57767fc4fd17af..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_conf_nas_barca_indoor.sh
+++ /dev/null
@@ -1,75 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 0 9
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.4
-#sudo ifconfig eth0 10.0.3.3
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-# Com between MR2 <-> CH1
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-
-
-# Com between MR2 <-> CH2
-#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_conf_nas_barca_outdoor.sh
deleted file mode 100755
index 3a3e4b49ce757c3e6d3756f7d5b8b2f35027c2d9..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sleep 1
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 8 9
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.4
-sudo ifconfig eth0 10.0.3.3
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-# Com between MR2 <-> CH1
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-
-
-# Com between MR2 <-> CH2
-#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_mpls_nas_barca.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_mpls_nas_barca.sh
deleted file mode 100755
index 73988ccaf5f22114e57a1f4eaebf511b16d60ceb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_mpls_nas_barca.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
-#MN2->MN1
-./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
-
-#CH1->CH2
-./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
-#CH2->CH1
-./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
-
-#MN3->MN1
-var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH1_MN1 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-sudo ip -6 route add $MN3_IN6_ADDR/128 dev eth0
-#MN1->MN3
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN1_CH1_MR2_MN3 labelspace 0 proto ipv6
-
-#MN3->MN2
-var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH2_MN2 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-#MN2->MN3
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MN2_CH2_MR2_MN3 labelspace 0 proto ipv6
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_indoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_indoor.sh
deleted file mode 100755
index da3d0d02fbf48a1433ec91e75ecd7a2dc4b85d0b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_indoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_indoor.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_outdoor.sh
deleted file mode 100755
index 31861dc030bd75c7f6eb7013e46a2244da164261..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_outdoor.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_outdoor_nopmip.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_outdoor_nopmip.sh
deleted file mode 100755
index bc865a7b21734103c2c837086caa1da0d0c61521..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr2_nas_barca_outdoor_nopmip.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr2_conf_nas_barca_outdoor.sh
-./mr2_mpls_nas_barca.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
-#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_conf_nas_barca.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_conf_nas_barca.sh
deleted file mode 100755
index 3888abb56c54053dc652e2b7e8a6d61f857ca352..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_conf_nas_barca.sh
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 1 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_conf_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_conf_nas_barca_outdoor.sh
deleted file mode 100755
index 5943877970f2e423e33bf5ae501d40c06ebfdac8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_conf_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/bash
-
-
-source params.sh
-sleep 1
-
-export OPENAIR1_DIR
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 4 10
-
-
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-
-sudo ifconfig eth0 10.0.2.5
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.0.5
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 13
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
-
-
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_mpls_barca.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_mpls_barca.sh
deleted file mode 100755
index a9582507cde029be9a789892fa8d58268c7ac393..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_mpls_barca.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr3
-
-echo "0" > /sys/mpls/debug
-
-
-echo 'MN1->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-
-
-
-echo 'MN3->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
-
-
-echo 'MN2->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_mpls_nas_barca.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_mpls_nas_barca.sh
deleted file mode 100755
index a9582507cde029be9a789892fa8d58268c7ac393..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_mpls_nas_barca.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr3
-
-echo "0" > /sys/mpls/debug
-
-
-echo 'MN1->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-
-
-
-echo 'MN3->MN2'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
-
-
-echo 'MN2->MN3'
-var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_nas_barca.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_nas_barca.sh
deleted file mode 100755
index a0692f05909a12c1b13ac32dc77c51c16cdd2ef7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_nas_barca.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_nas_barca_outdoor.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_nas_barca_outdoor.sh
deleted file mode 100755
index a08adfbd58cbbec7f28950b46c1c250242ddceea..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/mr3_nas_barca_outdoor.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr3_conf_nas_barca_outdoor.sh
-./mr3_mpls_nas_barca.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
-
-watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./del_mpls.sh
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/params.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/params.sh
deleted file mode 100755
index 8377964a5569b05a2f6ad614773107e29a6c44b9..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/params.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/bash
-
-MR1_IN_ADDR=10.0.1.3
-MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
-MR1_EG_ADDR=192.168.9.1
-MR1_EG6_ADDR=2001:660:5502::100
-# Flow CH1->MR1
-MR1_LABEL_IN=1001
-# Flow MR1->CH1
-MR1_LABEL_OUT=1000
-ETH_MR1=eth0
-
-MR2_IN_ADDR=10.0.1.4
-MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
-MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
-MR2_EG6_ADDR=2001:660:5502::300
-ETH_MR2=eth0
-# Flow CH1->MR2
-MR2_CH1_LABEL_IN=2000
-# Flow MR2->CH1
-MR2_CH1_LABEL_OUT=2001
-# Flow CH2->MR2
-MR2_CH2_LABEL_IN=3001
-# Flow MR2->CH2
-MR2_CH2_LABEL_OUT=3000
-
-MR3_IN_ADDR=10.0.1.5
-MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
-MR3_EG_ADDR=192.168.10.1
-MR3_EG6_ADDR=2001:660:5502::200
-# Flow CH2->MR3
-MR3_LABEL_IN=4000
-# Flow MR3->CH2
-MR3_LABEL_OUT=4001
-ETH_MR3=eth0
-
-CH1_IN_ADDR=10.0.1.1
-CH2_IN_ADDR=10.0.1.2
-
-CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
-CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
-
-## Communication between the CHs
-CH1_MR2_CH2_LABEL_IN=8001
-CH1_MR2_CH2_LABEL_OUT=8000
-CH2_MR2_CH1_LABEL_IN=9001
-CH2_MR2_CH1_LABEL_OUT=9000
-
-## Com between MN1 and MN3
-MN1_MR1_CH1_MN3=1500
-MN3_CH1_MR1_MN1=1501
-MN1_CH1_MR2_MN3=2500
-MN3_MR2_CH1_MN1=2501
-
-## Com between MN2 and MN3
-MN3_MR2_CH2_MN2=3500
-MN2_CH2_MR2_MN3=3501
-MN3_CH2_MR3_MN2=4500
-MN2_MR3_CH2_MN3=4501
-
-#MN1_IN6_ADDR=2001:660:5502::20
-#MN2_IN6_ADDR=2001:660:5502::25
-#MN1_IN6_ADDR=2001:660:5502::110
-#MN1_IN6_ADDR=2001:660:5502:0:21c:23ff:fe5a:d6c -> SOPRANO
-# MN1 - COOKIEMONSTER
-MN1_IN6_ADDR=2001:660:5502:0:21c:23ff:fe28:5809
-MN1_IN_ADDR=192.168.9.2
-
-MN2_IN_ADDR=192.168.10.2
-# MN2 - OSCAR
-MN2_IN6_ADDR=2001:660:5502:0:21c:23ff:fe2f:151b
-
-#MN3_IN6_ADDR=2001:660:5502::310
-# CAMERA IP
-MN3_IN6_ADDR=2001:660:5502:0:240:8cff:fe77:9b79
-
-# Put the right OPENAIR3 path here
-OPENAIR3_HOME=/root/openair_trials_2/openair3
-OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/PMIP6D
-OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
-REFLECTOR_DIR=$OPENAIR3_HOME/EXAMPLES/BARCA_TRIALS/REFLECTOR
-
-# Put the right OPENAIR2 path here
-#OPENAIR2_DIR=~/openair2_r234/openair2/
-OPENAIR2_DIR=/root/openair_trials_2/openair2
-
-
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/start_openair.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/start_openair.sh
deleted file mode 100755
index 8e8f248a9fa97521588fa800faf24063c18398cc..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/start_openair.sh
+++ /dev/null
@@ -1,138 +0,0 @@
-if [ "$1" == "" ]; then
- echo "Please provide a TX power level (0-8)"
- exit
-fi
-
-if [ "$2" == "" ]; then
- echo "Please provide a Node ID (0-7 for CH, 8-15 for MR/UE)"
- exit
-fi
-
-if [ "$3" != "" ]; then
- echo "Setting timing advance to" $3
-else
- echo "Using standard timing advance"
-fi
-
-if [ "$OPENAIR1_DIR" == "" ] ; then
- echo "Please set OPENAIR1_DIR environment variable"
- exit
-else
- echo "OPENAIR1_DIR Set to $OPENAIR1_DIR"
-fi
-
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-source ./txgains.sh
-
-case $1 in
- 0)
- CBMIMO1_POWER=$CBMIMO1_m20_dBm
- echo "Configuring CBMIMO1 for -20dBm ($CBMIMO1_POWER)"
- ;;
- 1)
- CBMIMO1_POWER=$CBMIMO1_m15_dBm
- echo Configuring CBMIMO1 for -15dBm
- ;;
- 2)
- CBMIMO1_POWER=$CBMIMO1_m10_dBm
- echo Configuring CBMIMO1 for -10dBm
- ;;
- 3)
- CBMIMO1_POWER=$CBMIMO1_m5_dBm
- echo Configuring CBMIMO1 for -5dBm
- ;;
- 4)
- CBMIMO1_POWER=$CBMIMO1_0_dBm
- echo Configuring CBMIMO1 for 0dBm
- ;;
- 5)
- CBMIMO1_POWER=$CBMIMO1_5_dBm
- echo Configuring CBMIMO1 for 5dBm
- ;;
- 6)
- CBMIMO1_POWER=$CBMIMO1_10_dBm
- echo Configuring CBMIMO1 for 10dBm
- ;;
- 7)
- CBMIMO1_POWER=$CBMIMO1_15_dBm
- echo Configuring CBMIMO1 for 15dBm
- ;;
- 8)
- CBMIMO1_POWER=$CBMIMO1_20_dBm
- echo Configuring CBMIMO1 for 20dBm
- ;;
- *)
- echo Invalid TX power
- exit
-esac
-
-
-echo Removing openair_rf,openair_l2 and openair_rrc modules
-sudo rmmod -f openair_rrc
-sudo rmmod -f openair_l2
-sudo rmmod -f openair_rf
-
-sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_l2.ko
-OARF_RET=`lsmod | grep -e openair_rf`
-
-if [ "$OARF_RET" = "" ]; then
- echo Error loading openair1 module
- exit
-fi
-
-sudo insmod $OPENAIR2_DIR/LAYER2/openair_layer2.ko
-OA2_RET=`lsmod | grep -e openair_l2`
-
-if [ "$OA2_RET" = "" ]; then
- echo Error loading openair2 module
- exit
-fi
-
-
-sudo insmod $OPENAIR2_DIR/RRC/MESH/openair_RRC.ko
-OARRC_RET=`lsmod | grep -e openair_rrc`
-if [ "$OARRC_RET" = "" ]; then
- echo Error loading openair RRC module
- exit
-fi
-
-OA_DEV="/dev/openair0"
-
-if [ -c "$OA_DEV" ]; then
- echo "$OA_DEV exists"
-else
- echo "creating $OA_DEV"
- sudo mknod $OA_DEV c 127 0
- sudo chmod a+rw /dev/openair0
-fi
-
-./openair_rf_cbmimo1 1 0
-./openair_rf_cbmimo1 1 6 $CBMIMO1_POWER
-if [ "$3" != "" ]; then
- ./openair_rf_cbmimo1 1 25 $3
-fi
-if [ $2 -eq "0" ]; then
- ./openair_rf_cbmimo1 1 1 1 $2
-elif [ $2 -lt "8" ]; then
- ./openair_rf_cbmimo1 1 2 1 $2
-elif [ $2 -lt "16" ]; then
- ./openair_rf_cbmimo1 1 3 1 $2
-else
- echo Illegal Node ID, exiting
- exit
-fi
-
-sleep 1
-
-
-# Watch the status of the radio to check for hardware exit event
-
-#OA1_STATE=`cat /proc/openair1/openair1_state`
-
-#while [ "$OA1_STATE" != "EXITED" ]; do
-# OA1_STATE=`cat /proc/openair1/openair1_state`
-# sleep .5
-#done
-
-#./openair_rf_cbmimo1 1 4 1
-#echo CBMIMO1 Hardware exit, restarting ...
diff --git a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/stop_rf.sh b/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/stop_rf.sh
deleted file mode 100755
index 96f1ea5ff7c5718a7c948ed0112cd9c6460a403f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/stop_rf.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-echo STOP STARTS...
-./openair_rf_cbmimo1 1 4 1
-sleep 2
-echo STOP RF DONE
-sudo killall chbch_scope
-echo STOP CHBCH SCOPE DONE
-sudo killall sach_scope
-echo STOP_SACH SCOPE DONE
-sleep 1
-sudo rmmod nasmesh
-sleep 1
-echo REMOVE NASMESH MODULE DONE
-sudo rmmod openair_rrc
-sleep 1
-echo REMOVE RRC MODULE DONE
-sudo rmmod openair_l2
-sleep 1
-echo REMOVE LAYER2 MODULE DONE
-sudo rmmod openair_rf
-echo REMOVE RF MODULE DONE
-echo STOP FINISHED SUCCESSFULLY
diff --git a/openair3/EXAMPLES/COPYING b/openair3/EXAMPLES/COPYING
deleted file mode 100644
index 94a9ed024d3859793618152ea559a168bbcbb5e2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/COPYING
+++ /dev/null
@@ -1,674 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
- The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works. By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users. We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors. You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
- To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights. Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received. You must make sure that they, too, receive
-or can get the source code. And you must show them these terms so they
-know their rights.
-
- Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
- For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software. For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
- Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so. This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software. The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable. Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products. If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
- Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary. To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- TERMS AND CONDITIONS
-
- 0. Definitions.
-
- "This License" refers to version 3 of the GNU General Public License.
-
- "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
- "The Program" refers to any copyrightable work licensed under this
-License. Each licensee is addressed as "you". "Licensees" and
-"recipients" may be individuals or organizations.
-
- To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy. The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
- A "covered work" means either the unmodified Program or a work based
-on the Program.
-
- To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy. Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
- To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies. Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
- An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License. If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
- 1. Source Code.
-
- The "source code" for a work means the preferred form of the work
-for making modifications to it. "Object code" means any non-source
-form of a work.
-
- A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
- The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form. A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
- The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities. However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work. For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
- The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
- The Corresponding Source for a work in source code form is that
-same work.
-
- 2. Basic Permissions.
-
- All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met. This License explicitly affirms your unlimited
-permission to run the unmodified Program. The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work. This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
- You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force. You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright. Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
- Conveying under any other circumstances is permitted solely under
-the conditions stated below. Sublicensing is not allowed; section 10
-makes it unnecessary.
-
- 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
- No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
- When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
- 4. Conveying Verbatim Copies.
-
- You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
- You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
- 5. Conveying Modified Source Versions.
-
- You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
- a) The work must carry prominent notices stating that you modified
- it, and giving a relevant date.
-
- b) The work must carry prominent notices stating that it is
- released under this License and any conditions added under section
- 7. This requirement modifies the requirement in section 4 to
- "keep intact all notices".
-
- c) You must license the entire work, as a whole, under this
- License to anyone who comes into possession of a copy. This
- License will therefore apply, along with any applicable section 7
- additional terms, to the whole of the work, and all its parts,
- regardless of how they are packaged. This License gives no
- permission to license the work in any other way, but it does not
- invalidate such permission if you have separately received it.
-
- d) If the work has interactive user interfaces, each must display
- Appropriate Legal Notices; however, if the Program has interactive
- interfaces that do not display Appropriate Legal Notices, your
- work need not make them do so.
-
- A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit. Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
- 6. Conveying Non-Source Forms.
-
- You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
- a) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by the
- Corresponding Source fixed on a durable physical medium
- customarily used for software interchange.
-
- b) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by a
- written offer, valid for at least three years and valid for as
- long as you offer spare parts or customer support for that product
- model, to give anyone who possesses the object code either (1) a
- copy of the Corresponding Source for all the software in the
- product that is covered by this License, on a durable physical
- medium customarily used for software interchange, for a price no
- more than your reasonable cost of physically performing this
- conveying of source, or (2) access to copy the
- Corresponding Source from a network server at no charge.
-
- c) Convey individual copies of the object code with a copy of the
- written offer to provide the Corresponding Source. This
- alternative is allowed only occasionally and noncommercially, and
- only if you received the object code with such an offer, in accord
- with subsection 6b.
-
- d) Convey the object code by offering access from a designated
- place (gratis or for a charge), and offer equivalent access to the
- Corresponding Source in the same way through the same place at no
- further charge. You need not require recipients to copy the
- Corresponding Source along with the object code. If the place to
- copy the object code is a network server, the Corresponding Source
- may be on a different server (operated by you or a third party)
- that supports equivalent copying facilities, provided you maintain
- clear directions next to the object code saying where to find the
- Corresponding Source. Regardless of what server hosts the
- Corresponding Source, you remain obligated to ensure that it is
- available for as long as needed to satisfy these requirements.
-
- e) Convey the object code using peer-to-peer transmission, provided
- you inform other peers where the object code and Corresponding
- Source of the work are being offered to the general public at no
- charge under subsection 6d.
-
- A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
- A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling. In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage. For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product. A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
- "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source. The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
- If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information. But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
- The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed. Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
- Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
- 7. Additional Terms.
-
- "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law. If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
- When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it. (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.) You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
- Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
- a) Disclaiming warranty or limiting liability differently from the
- terms of sections 15 and 16 of this License; or
-
- b) Requiring preservation of specified reasonable legal notices or
- author attributions in that material or in the Appropriate Legal
- Notices displayed by works containing it; or
-
- c) Prohibiting misrepresentation of the origin of that material, or
- requiring that modified versions of such material be marked in
- reasonable ways as different from the original version; or
-
- d) Limiting the use for publicity purposes of names of licensors or
- authors of the material; or
-
- e) Declining to grant rights under trademark law for use of some
- trade names, trademarks, or service marks; or
-
- f) Requiring indemnification of licensors and authors of that
- material by anyone who conveys the material (or modified versions of
- it) with contractual assumptions of liability to the recipient, for
- any liability that these contractual assumptions directly impose on
- those licensors and authors.
-
- All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10. If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term. If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
- If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
- Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
- 8. Termination.
-
- You may not propagate or modify a covered work except as expressly
-provided under this License. Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
- However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
- Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
- Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License. If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
- 9. Acceptance Not Required for Having Copies.
-
- You are not required to accept this License in order to receive or
-run a copy of the Program. Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance. However,
-nothing other than this License grants you permission to propagate or
-modify any covered work. These actions infringe copyright if you do
-not accept this License. Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
- 10. Automatic Licensing of Downstream Recipients.
-
- Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License. You are not responsible
-for enforcing compliance by third parties with this License.
-
- An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations. If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
- You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License. For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
- 11. Patents.
-
- A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based. The
-work thus licensed is called the contributor's "contributor version".
-
- A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version. For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
- Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
- In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement). To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
- If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients. "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
- If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
- A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License. You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
- Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
- 12. No Surrender of Others' Freedom.
-
- If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all. For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
- 13. Use with the GNU Affero General Public License.
-
- Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work. The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
- 14. Revised Versions of this License.
-
- The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation. If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
- If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
- Later license versions may give you additional or different
-permissions. However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
- 15. Disclaimer of Warranty.
-
- THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. Limitation of Liability.
-
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
- 17. Interpretation of Sections 15 and 16.
-
- If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
- If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
- <program> Copyright (C) <year> <name of author>
- This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
- You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
- The GNU General Public License does not permit incorporating your program
-into proprietary programs. If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library. If this is what you want to do, use the GNU Lesser General
-Public License instead of this License. But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/initAR.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/initAR.sh
deleted file mode 100755
index d4a2777e09ddccf46436f897a08bd631628b44be..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/initAR.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-# transfered from HA
-ntpdate -b 2001:1::1
-OUTBOUNDIF=eth0
-INBOUNDIF=eth1
-tc qdisc change dev $INBOUNDIF root netem loss 0%
-tc qdisc change dev $OUTBOUNDIF root netem loss 0%
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/log3G.log b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/log3G.log
deleted file mode 100755
index 5877c1eb0d42b52d27a7d2093e61189ba0cfcd4c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/log3G.log
+++ /dev/null
@@ -1,2 +0,0 @@
-1234366513.615573522 10
-1234366523.651449078 30
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/params.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/params.sh
deleted file mode 100755
index 847ec14f92577d4611d5fb769e1934c1ce29a282..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/params.sh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/bash
-DEMO_DIR=$OPENAIR3_DIR"/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1"
-RADVD_CONF_FILE=$DEMO_DIR/etc/radvd.conf
-#----------------------------------------------
-HOME_AGENT_NW=2001:4::/32
-HOME_AGENT_ADDR_HL=2001:4::1/64
-HOME_AGENT_ADDR_CN=2001:1::1/64
-#----------------------------------------------
-CH1_EGRESS_ETHERNET_INTERFACE=eth0
-CH1_INGRESS_ETHERNET_INTERFACE=eth3
-CH1_IN6_ADDR=2001:2f0:110:6000::1/64
-CH1_IN6_NW=2001:2f0:110:6000::/64
-CH1_IN6_ADDR_CN=2001:1::6/64
-CH1_IN_ADDR=10.0.1.1/24
-CH1_IN_BROADCAST_ADDR=10.0.1.255
-#----------------------------------------------
-CH2_EGRESS_ETHERNET_INTERFACE=eth0
-CH2_INGRESS_ETHERNET_INTERFACE=eth1
-CH2_IN6_ADDR=2001:2f0:110:7000::1/64
-CH2_IN6_NW=2001:2f0:110:7000::/64
-CH2_IN6_ADDR_CN=2001:1::7/64
-CH2_IN_ADDR=10.0.2.2/24
-CH2_IN_BROADCAST_ADDR=10.0.2.255
-#----------------------------------------------
-MR_IN_ADDR=10.0.1.3/24
-MR_IN_ADDR2=10.0.2.3/24
-MR_IN6_ADDR1=2001:2f0:110:6000:3d6:5200:300:1/64
-MR_IN6_LLADDR1=fe80:0:0:0:3d6:5200:300:1/64
-MR_IN6_ADDR2=2001:2f0:110:7000:3d6:5200:300:2/64
-MR_IN6_LLADDR2=fe80:0:0:0:3d6:5200:300:2/64
-#----------------------------------------------
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/radioconfig_3G.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/radioconfig_3G.sh
deleted file mode 100755
index c6ca27d1dd89289445b511d80c19efa406c0facb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/radioconfig_3G.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-# transfered from HA
-#DOWNWARD HO
-#ER_START="30.0"
-#ER_END="1"
-
-#UPWARD HO
-ER_START="10"
-ER_END="30"
-###############
-OUTBOUNDIF=eth0
-INBOUNDIF=eth1
-LOG_AR="log3G.log"
-DURATION=10000
-TIMESLICE=100
-#LGtc qdisc change dev $INBOUNDIF root netem loss $ER_START%
-#LGtc qdisc change dev $OUTBOUNDIF root netem loss $ER_START%
-#LG./waitfortime $1
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_START > $LOG_AR
-sleep 5
-#./radio_emulation $OUTBOUNDIF $ER_START $ER_END $INBOUNDIF $ER_START $ER_END $DURATION $TIMESLICE >> $LOG_AR
-sleep 5
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_END >> $LOG_AR
-exit 0
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/start_ch1_user b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/start_ch1_user
deleted file mode 100755
index 0a7c8e036335da509ee3a2a612f3405dff962cfd..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/start_ch1_user
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/bash
-
-ip_no_mask ()
-{
- echo $1 | cut -d '/' -f1
-}
-
-source $OPENAIR3_DIR"/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/params.sh"
-HOME_AGENT_ADDR_HL_NO_MASK=`ip_no_mask $HOME_AGENT_ADDR_HL`
-HOME_AGENT_ADDR_CN_NO_MASK=`ip_no_mask $HOME_AGENT_ADDR_CN`
-#----------------------------------------------
-CH1_IN6_ADDR_NO_MASK=`ip_no_mask $CH1_IN6_ADDR`
-CH1_IN6_ADDR_CN_NO_MASK=`ip_no_mask $CH1_IN6_ADDR_CN`
-CH1_IN_ADDR_NO_MASK=`ip_no_mask $CH1_IN_ADDR`
-#----------------------------------------------
-CH2_IN6_ADDR_NO_MASK=`ip_no_mask $CH2_IN6_ADDR`
-CH2_IN6_ADDR_CN_NO_MASK=`ip_no_mask $CH2_IN6_ADDR_CN`
-CH2_IN_ADDR_NO_MASK=`ip_no_mask $CH2_IN_ADDR`
-#----------------------------------------------
-MR_IN_ADDR_NO_MASK=`ip_no_mask $MR_IN_ADDR`
-MR_IN_ADDR2_NO_MASK=`ip_no_mask $MR_IN_ADDR2`
-MR_IN6_ADDR1_NO_MASK=`ip_no_mask $MR_IN6_ADDR1`
-MR_IN6_LLADDR1_NO_MASK=`ip_no_mask $MR_IN6_LLADDR1`
-MR_IN6_ADDR2_NO_MASK=`ip_no_mask $MR_IN6_ADDR2`
-MR_IN6_LLADDR2_NO_MASK=`ip_no_mask $MR_IN6_LLADDR2`
-
-/etc/init.d/radvd stop
-killall -q mac_sim_rrm rrm emul_int xterm
-rmmod nasmesh
-
-sysctl -w net.ipv6.conf.all.accept_ra=0
-sysctl -w net.ipv6.conf.all.forwarding=1
-sysctl -w net.ipv6.conf.$CH1_EGRESS_ETHERNET_INTERFACE.accept_ra=0
-sysctl -w net.ipv6.conf.$CH1_EGRESS_ETHERNET_INTERFACE.forwarding=1
-sysctl -w net.ipv6.conf.$CH1_INGRESS_ETHERNET_INTERFACE.accept_ra=0
-sysctl -w net.ipv6.conf.$CH1_INGRESS_ETHERNET_INTERFACE.forwarding=1
-
-ifconfig $CH1_EGRESS_ETHERNET_INTERFACE down
-ifconfig $CH1_INGRESS_ETHERNET_INTERFACE down
-
-ifconfig $CH1_EGRESS_ETHERNET_INTERFACE up
-ifconfig $CH1_INGRESS_ETHERNET_INTERFACE up
-
-ip -6 addr add $CH1_IN6_ADDR_CN scope global dev $CH1_INGRESS_ETHERNET_INTERFACE
-
-ip -6 route add $HOME_AGENT_NW via $HOME_AGENT_ADDR_CN_NO_MASK
-ip -6 route add $CH2_IN6_NW via $CH2_IN6_ADDR_CN_NO_MASK
-
-cd $OPENAIR2_DIR
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:1 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH1_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:2 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH1_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:3 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -x $CH1_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:16 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -x $CH1_IN6_ADDR_NO_MASK -y $MR_IN6_ADDR1_NO_MASK -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -x $CH1_IN6_ADDR_NO_MASK -y $MR_IN6_LLADDR1_NO_MASK -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $CH1_IN_ADDR_NO_MASK -t $MR_IN_ADDR_NO_MASK -r 12
-
-ifconfig nasmesh0 up
-ip -4 addr add $CH1_IN_ADDR broadcast $CH1_IN_BROADCAST_ADDR dev nasmesh0
-ip -6 addr add $CH1_IN6_ADDR scope global dev nasmesh0
-
-
-route add -net 224.0.0.0 netmask 240.0.0.0 dev $CH1_EGRESS_ETHERNET_INTERFACE
-
-sleep 1
-sudo rm -f /tmp/*socket*
-cd $OPENAIR3_DIR/MESH/RRM/
-xterm -T RRM -hold -e sh rrm_idromel.sh &
-sleep 5
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim_rrm -m0 -t ../../TOPOLOGIES/eth_2chs_1node.top &
-
-sysctl -w net.ipv6.conf.nasmesh0.accept_ra=0
-sysctl -w net.ipv6.conf.nasmesh0.forwarding=1
-sleep 5
-cp $RADVD_CONF_FILE /etc/radvd.conf
-/etc/init.d/radvd start
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/waitfortime b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/waitfortime
deleted file mode 100755
index c37d9d9a13c32e0943c991fe405652d12b49228b..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/bin/waitfortime and /dev/null differ
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/hosts b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/hosts
deleted file mode 100755
index d6167b35d3bfa2ca7bc3b007f1c8c7793ab84b41..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/hosts
+++ /dev/null
@@ -1,11 +0,0 @@
-127.0.0.1 localhost
-127.0.1.1 daidal5
-
-192.168.12.100 carne
-# The following lines are desirable for IPv6 capable hosts
-::1 ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/interfaces b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/interfaces
deleted file mode 100755
index 4132a8d04f88aca5365bfbed871c6f52bcdfc69b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/interfaces
+++ /dev/null
@@ -1,25 +0,0 @@
-auto lo
-iface lo inet loopback
-
-
-
-
-iface eth0 inet static
-address 192.168.100.1
-netmask 255.255.255.0
-
-auto eth0
-
-
-iface eth1 inet static
-address 192.168.12.82
-netmask 255.255.255.0
-gateway 192.168.12.100
-
-auto eth1
-
-iface eth3 inet static
-address 192.168.1.2
-netmask 255.255.255.0
-
-auto eth3
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/nsswitch.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/nsswitch.conf
deleted file mode 100644
index b465c34cd8f987f853dec5ffceba648221673e48..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/nsswitch.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# /etc/nsswitch.conf
-#
-# Example configuration of GNU Name Service Switch functionality.
-# If you have the `glibc-doc' and `info' packages installed, try:
-# `info libc "Name Service Switch"' for information about this file.
-
-passwd: nis files
-group: nis files
-shadow: nis files
-
-hosts: nis files dns mdns
-networks: files
-
-protocols: db files
-services: db files
-ethers: db files
-rpc: db files
-
-netgroup: nis
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/radvd.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/radvd.conf
deleted file mode 100755
index 62bf71ed302765fa52ce3ad1cd5e9c00d8f00373..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/radvd.conf
+++ /dev/null
@@ -1,18 +0,0 @@
-interface nasmesh0
-{
- AdvSendAdvert on;
- MaxRtrAdvInterval 3;
- MinRtrAdvInterval 0.03;
- MinDelayBetweenRAs 0.03;
- AdvHomeAgentFlag off;
- AdvHomeAgentInfo off;
- AdvDefaultLifetime 360;
-
- prefix 2001:2f0:110:6000::/64
- {
- AdvOnLink on;
- AdvAutonomous on;
- AdvRouterAddr on;
- };
-
-};
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/rc.local b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/rc.local
deleted file mode 100755
index 65634dfa4682aebf56d1ba99a222037abd74ccbd..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH1/etc/rc.local
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/initAR.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/initAR.sh
deleted file mode 100755
index d4a2777e09ddccf46436f897a08bd631628b44be..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/initAR.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-# transfered from HA
-ntpdate -b 2001:1::1
-OUTBOUNDIF=eth0
-INBOUNDIF=eth1
-tc qdisc change dev $INBOUNDIF root netem loss 0%
-tc qdisc change dev $OUTBOUNDIF root netem loss 0%
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/ip_config_ar1.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/ip_config_ar1.sh
deleted file mode 100755
index 4ea6fbea05c661d4a8c40832684ca047a3fb5fce..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/ip_config_ar1.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-/etc/init.d/radvd stop
-
-sysctl -w net.ipv6.conf.all.accept_ra=0
-sysctl -w net.ipv6.conf.all.forwarding=1
-sysctl -w net.ipv6.conf.eth0.accept_ra=0
-sysctl -w net.ipv6.conf.eth0.forwarding=1
-sysctl -w net.ipv6.conf.eth1.accept_ra=0
-sysctl -w net.ipv6.conf.eth1.forwarding=1
-
-ifconfig eth0 down
-ifconfig eth0 up
-
-ifconfig eth1 down
-ifconfig eth1 up
-
-#ifconfig eth0 inet6 add 2001:1::6/64
-#ifconfig eth1 inet6 add 2001:2f0:110:6000::1/64
-
-route -A inet6 add 2001:4::/32 gw 2001:1::1
-route -A inet6 add 2001:2f0:110:7000::/64 gw 2001:1::7
-
-cp -f ../etc/radvd.conf /etc
-
-#/etc/init.d/radvd stop
-#/etc/init.d/radvd start
-
-tc qdisc add dev eth0 root netem loss 0%
-tc qdisc add dev eth1 root netem loss 0%
-
-cd $OPENAIR2_DIR/EXAMPLES/ETH_EMUL_2CHS_1NODE && ./start_ch1_user
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/ip_config_ar2.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/ip_config_ar2.sh
deleted file mode 100755
index 63dc82bac50683bd05df84926c3219ebc7cc82fd..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/ip_config_ar2.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-ifconfig eth0 down
-ifconfig eth1 down
-ifconfig eth0 up
-ifconfig eth1 up
-ifconfig eth1 add 2001:1::7/64
-ifconfig eth0 add 2001:2f0:110:7000::1/64
-ethtool -s eth0 autoneg on
-ethtool -s eth0 speed 100
-route -A inet6 add 2001:4::/32 gw 2001:1::1
-route -A inet6 add 2001:2f0:110:6000::/64 gw 2001:1::6
-# radvd service is not installed on this host
-radvd -m logfile -C /opt/bin/radvd_ar2.conf
-
-tc qdisc add dev eth0 root netem loss 0%
-tc qdisc add dev eth1 root netem loss 0%
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/logWLAN.log b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/logWLAN.log
deleted file mode 100755
index 5aefe75eb04e63be869cdd3a060d725e5878b68a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/logWLAN.log
+++ /dev/null
@@ -1,2 +0,0 @@
-1234366542.100669000 0.014
-1234366552.126226000 0.004
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/params.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/params.sh
deleted file mode 100755
index 4d6c08e8d776a9d81582a26d4d2daec859da93ec..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/params.sh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/bash
-DEMO_DIR=$OPENAIR3_DIR"/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2"
-RADVD_CONF_FILE=$DEMO_DIR/etc/radvd.conf
-#----------------------------------------------
-HOME_AGENT_NW=2001:4::/32
-HOME_AGENT_ADDR_HL=2001:4::1/64
-HOME_AGENT_ADDR_CN=2001:1::1/64
-#----------------------------------------------
-CH1_EGRESS_ETHERNET_INTERFACE=eth0
-CH1_INGRESS_ETHERNET_INTERFACE=eth3
-CH1_IN6_ADDR=2001:2f0:110:6000::1/64
-CH1_IN6_NW=2001:2f0:110:6000::/64
-CH1_IN6_ADDR_CN=2001:1::6/64
-CH1_IN_ADDR=10.0.1.1/24
-CH1_IN_BROADCAST_ADDR=10.0.1.255
-#----------------------------------------------
-CH2_EGRESS_ETHERNET_INTERFACE=eth0
-CH2_INGRESS_ETHERNET_INTERFACE=eth1
-CH2_IN6_ADDR=2001:2f0:110:7000::1/64
-CH2_IN6_NW=2001:2f0:110:7000::/64
-CH2_IN6_ADDR_CN=2001:1::7/64
-CH2_IN_ADDR=10.0.2.2/24
-CH2_IN_BROADCAST_ADDR=10.0.2.255
-#----------------------------------------------
-MR_IN_ADDR=10.0.1.3/24
-MR_IN_ADDR2=10.0.2.3/24
-MR_IN6_ADDR1=2001:2f0:110:6000:3d6:5200:300:1/64
-MR_IN6_LLADDR1=fe80:0:0:0:3d6:5200:300:1/64
-MR_IN6_ADDR2=2001:2f0:110:7000:3d6:5200:300:2/64
-MR_IN6_LLADDR2=fe80:0:0:0:3d6:5200:300:2/64
-#----------------------------------------------
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/radioconfig_WLAN.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/radioconfig_WLAN.sh
deleted file mode 100755
index 97b3e832dd48d2f1e55e123d92e186be953189b8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/radioconfig_WLAN.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-# transfered from HA
-#DOWNWARD HO
-#ER_START="0.004"
-#ER_END="0.016"
-#UPWARD HO
-ER_START="0.014"
-ER_END="0.004"
-###############
-OUTBOUNDIF=eth1
-INBOUNDIF=eth0
-LOG_AR="logWLAN.log"
-DURATION=10000
-TIMESLICE=100
-#tc qdisc change dev $INBOUNDIF root netem loss $ER_START%
-#tc qdisc change dev $OUTBOUNDIF root netem loss $ER_START%
-pwd
-./waitfortime $1
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_START > $LOG_AR
-sleep 5
-#./radio_emulation $OUTBOUNDIF $ER_START $ER_END $INBOUNDIF $ER_START $ER_END $DURATION $TIMESLICE >> $LOG_AR
-sleep 5
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_END >> $LOG_AR
-exit 0
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/start_ch2_user b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/start_ch2_user
deleted file mode 100755
index 7c2d31a5f2de64f04c6c77bbef170357b91d7259..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/start_ch2_user
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/bash
-
-ip_no_mask ()
-{
- echo $1 | cut -d '/' -f1
-}
-
-source $OPENAIR3_DIR"/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/params.sh"
-HOME_AGENT_ADDR_HL_NO_MASK=`ip_no_mask $HOME_AGENT_ADDR_HL`
-HOME_AGENT_ADDR_CN_NO_MASK=`ip_no_mask $HOME_AGENT_ADDR_CN`
-#----------------------------------------------
-CH1_IN6_ADDR_NO_MASK=`ip_no_mask $CH1_IN6_ADDR`
-CH1_IN6_ADDR_CN_NO_MASK=`ip_no_mask $CH1_IN6_ADDR_CN`
-CH1_IN_ADDR_NO_MASK=`ip_no_mask $CH1_IN_ADDR`
-#----------------------------------------------
-CH2_IN6_ADDR_NO_MASK=`ip_no_mask $CH2_IN6_ADDR`
-CH2_IN6_ADDR_CN_NO_MASK=`ip_no_mask $CH2_IN6_ADDR_CN`
-CH2_IN_ADDR_NO_MASK=`ip_no_mask $CH2_IN_ADDR`
-#----------------------------------------------
-MR_IN_ADDR_NO_MASK=`ip_no_mask $MR_IN_ADDR`
-MR_IN_ADDR2_NO_MASK=`ip_no_mask $MR_IN_ADDR2`
-MR_IN6_ADDR1_NO_MASK=`ip_no_mask $MR_IN6_ADDR1`
-MR_IN6_LLADDR1_NO_MASK=`ip_no_mask $MR_IN6_LLADDR1`
-MR_IN6_ADDR2_NO_MASK=`ip_no_mask $MR_IN6_ADDR2`
-MR_IN6_LLADDR2_NO_MASK=`ip_no_mask $MR_IN6_LLADDR2`
-
-/etc/init.d/radvd stop
-killall -q mac_sim_rrm rrm emul_int xterm
-rmmod nasmesh
-
-sysctl -w net.ipv6.conf.all.accept_ra=0
-sysctl -w net.ipv6.conf.all.forwarding=1
-sysctl -w net.ipv6.conf.$CH2_EGRESS_ETHERNET_INTERFACE.accept_ra=0
-sysctl -w net.ipv6.conf.$CH2_EGRESS_ETHERNET_INTERFACE.forwarding=1
-sysctl -w net.ipv6.conf.$CH2_INGRESS_ETHERNET_INTERFACE.accept_ra=0
-sysctl -w net.ipv6.conf.$CH2_INGRESS_ETHERNET_INTERFACE.forwarding=1
-
-ifconfig $CH2_EGRESS_ETHERNET_INTERFACE down
-ifconfig $CH2_INGRESS_ETHERNET_INTERFACE down
-
-ifconfig $CH2_EGRESS_ETHERNET_INTERFACE up
-ifconfig $CH2_INGRESS_ETHERNET_INTERFACE up
-
-ip -6 addr add $CH2_IN6_ADDR_CN scope global dev $CH2_INGRESS_ETHERNET_INTERFACE
-
-ip -6 route add $HOME_AGENT_NW via $HOME_AGENT_ADDR_CN_NO_MASK
-ip -6 route add $CH1_IN6_NW via $CH1_IN6_ADDR_CN_NO_MASK
-
-cd $OPENAIR2_DIR
-insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x22225678,0x02000000
-
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:1 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:2 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:3 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -x $CH2_IN6_ADDR_NO_MASK -y ff02:0:0:0:0:0:0:16 -r 3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -x $CH2_IN6_ADDR_NO_MASK -y $MR_IN6_ADDR2_NO_MASK -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -x $CH2_IN6_ADDR_NO_MASK -y $MR_IN6_LLADDR2_NO_MASK -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $CH2_IN_ADDR_NO_MASK -t $MR_IN_ADDR2_NO_MASK -r 12
-
-ifconfig nasmesh0 up
-ip -4 addr add $CH2_IN_ADDR broadcast $CH2_IN_BROADCAST_ADDR dev nasmesh0
-ip -6 addr add $CH2_IN6_ADDR scope global dev nasmesh0
-
-
-route add -net 224.0.0.0 netmask 240.0.0.0 dev $CH2_EGRESS_ETHERNET_INTERFACE
-
-sleep 1
-sudo rm -f /tmp/*socket*
-cd $OPENAIR3_DIR/MESH/RRM/
-xterm -T RRM -hold -e sh rrm_idromel.sh &
-sleep 5
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim_rrm -m1 -t ../../TOPOLOGIES/eth_2chs_1node.top &
-
-sysctl -w net.ipv6.conf.nasmesh0.accept_ra=0
-sysctl -w net.ipv6.conf.nasmesh0.forwarding=1
-sleep 5
-cp $RADVD_CONF_FILE /etc/radvd.conf
-/etc/init.d/radvd start
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/waitfortime b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/waitfortime
deleted file mode 100755
index c37d9d9a13c32e0943c991fe405652d12b49228b..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/bin/waitfortime and /dev/null differ
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/hosts b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/hosts
deleted file mode 100755
index 4141d3f2208f988075e1b62d582453724a160150..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/hosts
+++ /dev/null
@@ -1,37 +0,0 @@
-127.0.0.1 localhost
-127.0.1.1 handel
-
-192.168.12.100 carne
-2001:192:168:3:206:5bff:feb8:abba cn CN
-2001:192:168:100::3 ar11 AR11
-2001:192:168:200::2 ar12 AR12
-2001:192:168:101::2 ar21 AR21
-2001:192:168:201::2 ar22 AR22
-2001:192:168:100::2 ha1 HA1
-2001:192:168:101::2 ha2 HA2
-2001:192:168:106::2 ha HA
-
-
-# The following lines are desirable for IPv6 capable hosts
-::1 ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-2001:1::6 umts_ar
-2001:2f0:110:6000::1 umts_ar_eth1
-2001:1::7 wlan_ar
-2001:2f0:110:7000::1 wlan_ar_eth1
-2001:4::1 ha
-2001:4::3 cn_ha
-2001:4::20f:1fff:fe28:43e2 cn_coa
-2001:4::4 mr mr_ha
-2001:2f0:110:6000:201:2ff:fef5:aa4f mr_eth0
-2001:2f0:110:7000:20e:cff:fea2:cbcc mr_eth2
-
-2001:4:0:2::1 mr_nl
-2001:4:0:2:20e:a5ff:fe3f:57c4 mr_nl_eth0
-2001:4:0:2:218:8bff:feb0:50aa lfn_rd1
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/nsswitch.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/nsswitch.conf
deleted file mode 100755
index b465c34cd8f987f853dec5ffceba648221673e48..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/nsswitch.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# /etc/nsswitch.conf
-#
-# Example configuration of GNU Name Service Switch functionality.
-# If you have the `glibc-doc' and `info' packages installed, try:
-# `info libc "Name Service Switch"' for information about this file.
-
-passwd: nis files
-group: nis files
-shadow: nis files
-
-hosts: nis files dns mdns
-networks: files
-
-protocols: db files
-services: db files
-ethers: db files
-rpc: db files
-
-netgroup: nis
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/radvd.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/radvd.conf
deleted file mode 100755
index 3bc42a22a1fad3cb43e44c3f51a3c49842cb8c72..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/radvd.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-interface nasmesh0
-{
- AdvSendAdvert on;
- MaxRtrAdvInterval 3;
- MinRtrAdvInterval 0.03;
- MinDelayBetweenRAs 0.03;
- AdvHomeAgentFlag off;
- AdvHomeAgentInfo off;
- AdvDefaultLifetime 360;
-
-# prefix 2001:192:168:201::2/64
- prefix 2001:2f0:110:7000::/64
- {
- AdvOnLink on;
- AdvAutonomous on;
- AdvRouterAddr on;
- };
-
-};
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/rc.local b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/rc.local
deleted file mode 100755
index dda728fff1de2e7d2a2abd22d4d8cc6074e683c6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/rc.local
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/resolv.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/resolv.conf
deleted file mode 100755
index e41d3fbda23c9c6db5686f10ae9abfd405bd872c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CH2/etc/resolv.conf
+++ /dev/null
@@ -1 +0,0 @@
-nameserver 192.168.12.100
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CN/rc.local b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CN/rc.local
deleted file mode 100755
index 65634dfa4682aebf56d1ba99a222037abd74ccbd..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/CN/rc.local
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/ip_config_ha_sho_hiro.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/ip_config_ha_sho_hiro.sh
deleted file mode 100755
index 1fccfb2b7cd770be3c3ac3fc593ebd8b962e5f61..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/ip_config_ha_sho_hiro.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-# NEMO-SHO configuration for HA
-
-WORKING_DIRECTORY=$OPENAIR3_DIR"/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA"
-DATE=`date +"%Y_%b_%d.%HH%MMin"`
-LOG_FILE=$WORKING_DIRECTORY"/log/ha_sho_"$DATE".log"
-
-echo "enable forwarding:"
-#Enable Forwarding
-echo "1" >/proc/sys/net/ipv6/conf/all/forwarding
-echo "1" >/proc/sys/net/ipv6/conf/eth0/forwarding
-echo "1" >/proc/sys/net/ipv6/conf/eth1/forwarding
-echo "0" >/proc/sys/net/ipv6/conf/all/accept_ra
-echo "0" >/proc/sys/net/ipv6/conf/all/autoconf
-echo "0" >/proc/sys/net/ipv6/conf/all/accept_redirects
-echo "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp
-
-#MRLLADDR=fe80::20a:5eff:fe45:f14d
-killall mip6d tee radvd
-ip6tables -F
-ip tunnel del ip6tnl1
-ip tunnel del ip6tnl2
-echo "set ipv6 @ on interfaces:"
-#Set IPv6 addresses on two IFs
-#ifconfig eth0 inet add 192.168.2.1 netmask 255.255.255.0
-ip -6 addr add 2001:4::1/64 scope global dev eth0
-ip -6 addr add 2001:1::1/64 scope global dev eth1
-
-echo "adding routes:"
-# UMTS-AR
-ip -6 route add 2001:2f0:110:6000::/64 via 2001:1::6
-# WLAN-AR
-ip -6 route add 2001:2f0:110:7000::/64 via 2001:1::7
-
-
-echo "restarting radvd:"
-/etc/init.d/radvd stop
-/etc/init.d/radvd start
-echo "sleep 3 seconds"
-sleep 3
-echo "starting mip6d:"
-mip6d -c $WORKING_DIRECTORY/etc/ha_mcoa_sho.conf 2>&1 | tee $LOG_FILE &
-
-
-tcpdump -s 256 -i eth0 -v -w $WORKING_DIRECTORY"/log/ha_sho_tcpdump_eth0_"$DATE".log" &
-tcpdump -s 256 -i eth1 -v -w $WORKING_DIRECTORY"/log/ha_sho_tcpdump_eth1_"$DATE".log" &
-
-echo "sleep 1 hour (type Ctrl+C to end)"
-sleep 3600
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/HOtrigger.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/HOtrigger.sh
deleted file mode 100755
index 56cf642fc9eda250126916c65248588086381f55..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/HOtrigger.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# transfered from HA
-IF_UMTS=eth0
-IF_WLAN=eth2
-
-./waitfortime $1
-
-#Make-Before-Break HO
-#sleep 8
-#ifconfig $IF_WLAN up
-#ifconfig $IF_UMTS up
-
-#SHO(UPWARD)
-sleep 3
-ifconfig $IF_WLAN up
-sleep 10
-ifconfig $IF_UMTS down
-sleep 10
-ifconfig $IF_UMTS up
-sleep 10
-ifconfig $IF_WLAN down
-sleep 10
-ifconfig $IF_WLAN up
-sleep 10
-ifconfig $IF_UMTS down
-
-#SHO(DOWNWARD)
-#sleep 3
-#ifconfig $IF_UMTS up
-#sleep 11
-#ifconfig $IF_WLAN down
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/deinitCN.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/deinitCN.sh
deleted file mode 100755
index 7a292bc44ba1667f48faa309b1be6fce7f5f2310..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/deinitCN.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-# transfered from HA
-PID_TCPDUMP=`ps -A|grep tcpdump|cut -c1-5`
-kill -9 $PID_TCPDUMP
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/deinitLFN.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/deinitLFN.sh
deleted file mode 100755
index 59611fc0321dd8b70a29474db2ae267eb0aaea54..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/deinitLFN.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# transfered from HA
-PID_TCPDUMP=`ps -A|grep tcpdump|cut -c1-5`
-PID_IPERF=`ps -A|grep iperf|cut -c1-5`
-kill -9 $PID_TCPDUMP
-kill -9 $PID_IPERF
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/getlog.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/getlog.sh
deleted file mode 100755
index 0ca24ea80c8e71ba713e96568153fa02aa9326dc..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/getlog.sh
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-TIME=`date +%R`
-HOUR=${TIME%:*}
-MIN=${TIME#*:}
-FOLDER="log`date +%Y``date +%m``date +%d`_$HOUR$MIN"
-CN=cn
-LFN=lfn_rd1
-MR=mr
-UMTSAR=umts_ar
-WLANAR=wlan_ar
-LOG_LFN=logLFN.log
-LOG_CN=logCN.log
-LOG_HA_TMP=/var/log/kernel/info
-LOG_HA=logHA.log
-LOG_MR_TMP=/var/log/kmessages
-LOG_MR=logMR.log
-LOG_3GAR="log3G.log"
-LOG_WLANAR="logWLAN.log"
-CN_DIR="/opt/TESTBED_NEMO_MCOA_SHO/log"
-LFN_DIR="/opt/TESTBED_NEMO_MCOA_SHO/log"
-MR_DIR="/opt/TESTBED_NEMO_MCOA_SHO/log"
-AR_DIR="/opt/TESTBED_NEMO_MCOA_SHO/log"
-SCRIPT_LFN="deinitLFN.sh"
-SCRIPT_CN="deinitCN.sh"
-PRESCRIPT_AR="initAR.sh"
-CMD_LFN="cd $LFN_DIR;sh $SCRIPT_LFN"
-CMD_CN="cd $CN_DIR;sh $SCRIPT_CN"
-CMD_MR="cd $MR_DIR;at -f $SCRIPT_MR $START_TIME"
-PRECMD_AR="cd $AR_DIR;sh $PRESCRIPT_AR"
-
-# on HA
-PID_TCPDUMP=`ps -A|grep tcpdump|cut -c1-5`
-kill -9 $PID_TCPDUMP
-# on CN
-scp -26 root@$CN:$CN_DIR/$LOG_CN $LOG_CN
-scp -26 $SCRIPT_CN root@$CN:$CN_DIR/.
-ssh -26 -l root $CN $CMD_CN
-scp -26 root@$CN:$CN_DIR/"logCNtcpdump.log" .
-
-# on ARs
-ssh -26 -l root $WLANAR $PRECMD_AR
-ssh -26 -l root $UMTSAR $PRECMD_AR
-scp -26 root@$UMTSAR:$AR_DIR/$LOG_3GAR $LOG_3GAR
-scp -26 root@$WLANAR:$AR_DIR/$LOG_WLANAR $LOG_WLANAR
-# on LFN
-scp -26 $SCRIPT_LFN root@$LFN:$LFN_DIR/.
-ssh -26 -l root $LFN $CMD_LFN
-scp -26 root@$LFN:$LFN_DIR/$LOG_LFN $LOG_LFN
-scp -26 root@$LFN:$LFN_DIR/"logLFNtcpdump.log" .
-# on MR
-scp -26 root@$MR:$LOG_MR_TMP $LOG_MR
-
-#rename
-mkdir $FOLDER
-mv $LOG_CN ./$FOLDER/$LOG_CN
-mv $LOG_LFN ./$FOLDER/$LOG_LFN
-mv "logLFNtcpdump.log" ./$FOLDER/.
-mv $LOG_HA_TMP ./$FOLDER/$LOG_HA
-mv $LOG_MR ./$FOLDER/$LOG_MR
-mv "logHAtcpdump.log" ./$FOLDER/.
-mv $LOG_3GAR ./$FOLDER/.
-mv $LOG_WLANAR ./$FOLDER/.
-mv "logCNtcpdump.log" ./$FOLDER/.
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initAR.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initAR.sh
deleted file mode 100755
index d4a2777e09ddccf46436f897a08bd631628b44be..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initAR.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-# transfered from HA
-ntpdate -b 2001:1::1
-OUTBOUNDIF=eth0
-INBOUNDIF=eth1
-tc qdisc change dev $INBOUNDIF root netem loss 0%
-tc qdisc change dev $OUTBOUNDIF root netem loss 0%
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initHA.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initHA.sh
deleted file mode 100755
index c45bda74f23755eb18029645d1f701204624960c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initHA.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-# transfered from HA
-OUTGOINGIF=eth1
-LOGFILE=logHAtcpdump.log
-tcpdump -i $OUTGOINGIF -w $LOGFILE -s 1500 &
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initMR.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initMR.sh
deleted file mode 100755
index dc5bda88cf1ffd327396b13edddcb2beaf970755..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/initMR.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-KERNEL_LOGMR=/var/log/kmessages
-if [ -f $KERNEL_LOGMR ] ; then
- rm $KERNEL_LOGMR
-fi
-/etc/init.d/sysklogd restart
-ntpdate -b 2001:4::1
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/radioconfig_3G.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/radioconfig_3G.sh
deleted file mode 100755
index c6ca27d1dd89289445b511d80c19efa406c0facb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/radioconfig_3G.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-# transfered from HA
-#DOWNWARD HO
-#ER_START="30.0"
-#ER_END="1"
-
-#UPWARD HO
-ER_START="10"
-ER_END="30"
-###############
-OUTBOUNDIF=eth0
-INBOUNDIF=eth1
-LOG_AR="log3G.log"
-DURATION=10000
-TIMESLICE=100
-#LGtc qdisc change dev $INBOUNDIF root netem loss $ER_START%
-#LGtc qdisc change dev $OUTBOUNDIF root netem loss $ER_START%
-#LG./waitfortime $1
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_START > $LOG_AR
-sleep 5
-#./radio_emulation $OUTBOUNDIF $ER_START $ER_END $INBOUNDIF $ER_START $ER_END $DURATION $TIMESLICE >> $LOG_AR
-sleep 5
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_END >> $LOG_AR
-exit 0
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/radioconfig_WLAN.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/radioconfig_WLAN.sh
deleted file mode 100755
index 97b3e832dd48d2f1e55e123d92e186be953189b8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/radioconfig_WLAN.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-# transfered from HA
-#DOWNWARD HO
-#ER_START="0.004"
-#ER_END="0.016"
-#UPWARD HO
-ER_START="0.014"
-ER_END="0.004"
-###############
-OUTBOUNDIF=eth1
-INBOUNDIF=eth0
-LOG_AR="logWLAN.log"
-DURATION=10000
-TIMESLICE=100
-#tc qdisc change dev $INBOUNDIF root netem loss $ER_START%
-#tc qdisc change dev $OUTBOUNDIF root netem loss $ER_START%
-pwd
-./waitfortime $1
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_START > $LOG_AR
-sleep 5
-#./radio_emulation $OUTBOUNDIF $ER_START $ER_END $INBOUNDIF $ER_START $ER_END $DURATION $TIMESLICE >> $LOG_AR
-sleep 5
-TIMESECOND=`date +%s`
-TIMENANO=`date +%N`
-echo $TIMESECOND.$TIMENANO $ER_END >> $LOG_AR
-exit 0
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/run_test.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/run_test.sh
deleted file mode 100755
index 50555160fd7be5f7a549c619c68ff9d5403b0cdf..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/run_test.sh
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/bash
-date +%s
-START_TIME=`date +%s`
-START_TIME=`expr $START_TIME + 30`
-CN=cn
-LFN=lfn_rd1
-MR=mr
-UMTSAR=umts_ar
-WLANAR=wlan_ar
-START_CN="tcp_send.sh"
-#START_CN="tcp_send_CBR.sh"
-INIT1_LFN="tcp_recv.sh"
-INIT2_LFN="tcp_recv_dump.sh"
-INIT_MR="initMR.sh"
-SCRIPT_MR="HOtrigger.sh"
-INIT_HA="initHA.sh"
-INIT_AR="initAR.sh"
-RADIOCONFIG_UMTSAR="radioconfig_3G.sh"
-RADIOCONFIG_WLANAR="radioconfig_WLAN.sh"
-echo "START TIME=$START_TIME"
-echo "set variables"
-CN_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-LFN_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-MR_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-AR_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-CMD_CN="cd $CN_DIR && sh $START_CN $START_TIME $LFN"
-CMD_MR="cd $MR_DIR;sh $SCRIPT_MR $START_TIME"
-PRECMD_MR="cd $MR_DIR;sh $INIT_MR"
-CMD1_LFN="cd $LFN_DIR;sh $INIT1_LFN"
-CMD2_LFN="cd $LFN_DIR;sh $INIT2_LFN"
-PRECMD_AR="cd $AR_DIR;sh $INIT_AR"
-CMD_UMTSAR="cd $AR_DIR;sh $RADIOCONFIG_UMTSAR $START_TIME"
-CMD_WLANAR="cd $AR_DIR && sh $RADIOCONFIG_WLANAR $START_TIME"
-
-KERNEL_LOGHA=/var/log/kernel/info
-
-#start measurements
-echo "-----Start Measurement"
-# on HA
-echo "on HA"
-if [ -f $KERNEL_LOGHA ] ; then
- rm /var/log/kernel/info
-fi
-/etc/init.d/sysklogd restart
-sh $INIT_HA
-
-#on ARs
-echo "on ARs"
-ssh -l root $WLANAR $PRECMD_AR
-ssh -l root $UMTSAR $PRECMD_AR
-ssh -f -l root $UMTSAR $CMD_UMTSAR
-ssh -f -l root $WLANAR $CMD_WLANAR
-#on CN
-echo "on CN"
-ssh -f -l root $CN $CMD_CN
-#on MR
-echo "on MR"
-ssh -l root $MR $PRECMD_MR
-ssh -f -l root $MR $CMD_MR
-#on LFN
-echo "on LFN"
-ssh -f -l root $LFN $CMD1_LFN
-ssh -f -l root $LFN $CMD2_LFN
-
-echo "starting measurements on $1"
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/setting.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/setting.sh
deleted file mode 100755
index cf7d5b5a300c214b6ee776dc19b927374f5b587e..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/setting.sh
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/bash
-CN=cn_ha
-LFN=lfn_rd1
-MR=mr
-UMTSAR=umts_ar
-WLANAR=wlan_ar
-START_CN="tcp_send.sh"
-#START_CN="tcp_send_CBR.sh"
-INIT1_LFN="tcp_recv.sh"
-INIT2_LFN="tcp_recv_dump.sh"
-INIT_MR="initMR.sh"
-INIT_HA="initHA.sh"
-INIT_AR="initAR.sh"
-WAIT_FOR_TIME="waitfortime"
-SCRIPT_MR="HOtrigger.sh"
-RADIOCONFIG_UMTSAR="radioconfig_3G.sh"
-RADIOCONFIG_WLANAR="radioconfig_WLAN.sh"
-
-echo "set variables"
-#CN_DIR="/opt/TESTBED_NEMO_MCOA_SHO"
-CN_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-#LFN_DIR="/opt/TESTBED_NEMO_MCOA_SHO"
-LFN_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-#MR_DIR="/opt/TESTBED_NEMO_MCOA_SHO"
-MR_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-#AR_DIR="/opt/TESTBED_NEMO_MCOA_SHO"
-AR_DIR="/opt/TESTBED_NEMO_MCOA_SHO/bin"
-
-CMD1_AR="tc qdisc change dev eth0 root netem loss 0%"
-CMD2_AR="tc qdisc change dev eth1 root netem loss 0%"
-
-#preparation
-echo "-----Preparation"
-echo "-----Changing Radio Emulation Settings on 3G_AR"
-ssh -l root $UMTSAR $CMD1_AR
-ssh -l root $UMTSAR $CMD2_AR
-echo "-----Changing Radio Emulation Settings on WLAN_AR"
-ssh -l root $WLANAR $CMD1_AR
-ssh -l root $WLANAR $CMD2_AR
-# on CN
-echo "-----copying file to CN"
-scp $WAIT_FOR_TIME root@$CN:$CN_DIR
-scp $START_CN root@$CN:$CN_DIR
-# on AR1
-echo "-----copying file to ARs"
-scp $WAIT_FOR_TIME root@$UMTSAR:$AR_DIR
-scp $WAIT_FOR_TIME root@$WLANAR:$AR_DIR
-scp $RADIOCONFIG_UMTSAR root@$UMTSAR:$AR_DIR
-scp $RADIOCONFIG_WLANAR root@$WLANAR:$AR_DIR
-scp $INIT_AR root@$UMTSAR:$AR_DIR
-scp $INIT_AR root@$WLANAR:$AR_DIR
-# on MR
-echo "-----copying file to MR"
-scp $WAIT_FOR_TIME root@$MR:$MR_DIR
-scp $SCRIPT_MR root@$MR:$MR_DIR
-scp $INIT_MR root@$MR:$MR_DIR
-# on LFN
-echo "-----copying file to LFN"
-scp $WAIT_FOR_TIME root@$LFN:$LFN_DIR
-scp $INIT1_LFN root@$LFN:$LFN_DIR
-scp $INIT2_LFN root@$LFN:$LFN_DIR
-
-echo "-----Preparation was done"
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_recv.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_recv.sh
deleted file mode 100755
index fa5bc65c6e203116cf37e8fda379cca0caaa3842..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_recv.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-# transfered from HA
-BASELOG=logLFN.log
-ntpdate -b 2001:4::1 > /dev/null
-iperf -V -s -i 1 >$BASELOG
-exit 0
-
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_recv_dump.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_recv_dump.sh
deleted file mode 100755
index afc2e738493f2e0a6d2b6f89eb07798c2886be4c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_recv_dump.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# transfered from HA
-BASELOG=logLFNtcpdump.log
-tcpdump -i eth0 -w $BASELOG -s 1500 > /dev/null
-exit 0
-
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_send.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_send.sh
deleted file mode 100755
index 001f2934049dcea0da49447d1ff5b589cd01ba70..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_send.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-# transfered from HA
-LOGFILE=logCN.log
-TCPDUMPLOG=logCNtcpdump.log
-WAITTIME=5
-DURATION=60
-tcpdump -i eth0 -w $TCPDUMPLOG -s 1500 > /dev/null &
-echo "start" > $LOGFILE
-date -R >> $LOGFILE
-netstat -s|grep retrans >> $LOGFILE
-ntpdate -b 2001:4::1 > /dev/null
-./waitfortime $1
-
-
-#WARNING
-
-#iperf -V -c $2 -t $DURATION > /dev/null
-
-
-
-
-
-
-netstat -s|grep retrans >> $LOGFILE
-sleep $WAITTIME
-echo "end" >> $LOGFILE
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_send_CBR.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_send_CBR.sh
deleted file mode 100755
index 8f980063c8975eb7d70a1cdf57325468294aba23..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/tcp_send_CBR.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-# transfered from HA
-LOGFILE=logCN.log
-TCPDUMPLOG=logCNtcpdump.log
-WAITTIME=5
-DURATION=20
-BITRATE=128000
-tcpdump -i eth0 -w $TCPDUMPLOG -s 1500 > /dev/null &
-echo "start" > $LOGFILE
-date -R >> $LOGFILE
-netstat -s|grep retrans >> $LOGFILE
-ntpdate -b 2001:4::1 > /dev/null
-./waitfortime $1
-iperf_CBR -V -c $2 -t $DURATION -g $BITRATE> /dev/null
-netstat -s|grep retrans >> $LOGFILE
-sleep $WAITTIME
-echo "end" >> $LOGFILE
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/waitfortime b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/waitfortime
deleted file mode 100755
index c37d9d9a13c32e0943c991fe405652d12b49228b..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/waitfortime and /dev/null differ
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/waitfortime.c b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/waitfortime.c
deleted file mode 100755
index 387b7c9451eaf5e84028259d08d604813f030ab2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/bin/script_BAD/waitfortime.c
+++ /dev/null
@@ -1,79 +0,0 @@
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <signal.h>
-
-#include <netinet/in.h>
-#include <netinet/ip6.h>
-#include <netinet/icmp6.h>
-
-#include <netdb.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdbool.h>
-#include <string.h>
-#include <stdio.h>
-#include <argp.h>
-#include <ctype.h>
-#include <errno.h>
-#include <limits.h>
-
-#define MSTOUS 1000000
-
-int main (int argc, char **argv)
-{
- fd_set fdset;
- int fdmax;
- struct timeval timeout;
- struct timeval last, intvl, now;
- struct timeval *t = NULL;
- long target_time;
-
- fdmax = 1;
- intvl.tv_sec = 0;
- intvl.tv_usec = 1000;
-
- if (argc != 2) {
- printf("waitfortime time(in sec)\n");
- return -1;
- }
-
- target_time = atol(argv[1]);
- gettimeofday (&last, NULL);
-
- if (last.tv_sec >= target_time) {
- return -1;
- } else while (last.tv_sec != target_time) {
- int n;
- FD_ZERO (&fdset);
- gettimeofday (&now, NULL);
- timeout.tv_sec = last.tv_sec + intvl.tv_sec - now.tv_sec;
- timeout.tv_usec = last.tv_usec + intvl.tv_usec - now.tv_usec;
-
- while (timeout.tv_usec < 0) {
- timeout.tv_usec += 1000000;
- timeout.tv_sec--;
- }
-
- while (timeout.tv_usec >= 1000000) {
- timeout.tv_usec -= 1000000;
- timeout.tv_sec++;
- }
-
- if (timeout.tv_sec < 0)
- timeout.tv_sec = timeout.tv_usec = 0;
-
- n = select (fdmax, &fdset, NULL, NULL, &timeout);
-
- if (n < 0) {
- perror ("select");
- continue;
- } else if (n == 1) {
- break;
- } else {
- gettimeofday (&last, NULL);
- }
- }
-
- return 0;
-}
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/config.gz b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/config.gz
deleted file mode 100755
index 54bf00c50d31a99c66080285d3757f9ef0654d13..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/config.gz and /dev/null differ
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ha_mcoa.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ha_mcoa.conf
deleted file mode 100755
index 4ea5e22a477157598ca28fd1d5c704fa6c882a6c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ha_mcoa.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-# This is an example of nemod NEMO enabled Home Agent configuration file
-
-NodeConfig HA;
-
-## If set to > 0, will not detach from tty
-DebugLevel 10;
-
-## List of interfaces where we serve as Home Agent
-Interface "eth0";
-
-HaAcceptMobRtr enabled;
-HaAcceptMCoAReg enabled;
-
-HaServedPrefix 2001:4::/64;
-
-#DefaultBindingAclPolicy allow;
-DefaultBindingAclPolicy deny;
-
-#BindingAclPolicy 2001:4::230:1bff:feaf:3203 (2001:4:0:1::/64) MCoAReg allow;
-#BindingAclPolicy 2001:4::2d0:59ff:fef8:2ed1 (2001:4:0:2::/64) MCoAReg allow;
-BindingAclPolicy 2001:4::2 MCoAReg allow;
-BindingAclPolicy 2001:4::3 MCoAReg allow;
-
-BindingAclPolicy 2001:4::4 (2001:4:0:2::/64) MCoAReg allow;
-
-
-
-
-##
-## IPsec configuration
-##
-
-#UseMnHaIPsec enabled;
-UseMnHaIPsec disabled;
-
-## Key Management Mobility Capability
-KeyMngMobCapability disabled;
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ha_mcoa_sho.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ha_mcoa_sho.conf
deleted file mode 100755
index 4ea5e22a477157598ca28fd1d5c704fa6c882a6c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ha_mcoa_sho.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-# This is an example of nemod NEMO enabled Home Agent configuration file
-
-NodeConfig HA;
-
-## If set to > 0, will not detach from tty
-DebugLevel 10;
-
-## List of interfaces where we serve as Home Agent
-Interface "eth0";
-
-HaAcceptMobRtr enabled;
-HaAcceptMCoAReg enabled;
-
-HaServedPrefix 2001:4::/64;
-
-#DefaultBindingAclPolicy allow;
-DefaultBindingAclPolicy deny;
-
-#BindingAclPolicy 2001:4::230:1bff:feaf:3203 (2001:4:0:1::/64) MCoAReg allow;
-#BindingAclPolicy 2001:4::2d0:59ff:fef8:2ed1 (2001:4:0:2::/64) MCoAReg allow;
-BindingAclPolicy 2001:4::2 MCoAReg allow;
-BindingAclPolicy 2001:4::3 MCoAReg allow;
-
-BindingAclPolicy 2001:4::4 (2001:4:0:2::/64) MCoAReg allow;
-
-
-
-
-##
-## IPsec configuration
-##
-
-#UseMnHaIPsec enabled;
-UseMnHaIPsec disabled;
-
-## Key Management Mobility Capability
-KeyMngMobCapability disabled;
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/hosts b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/hosts
deleted file mode 100755
index bac0379326485d85763e04303ac6f11bfdc8af6c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/hosts
+++ /dev/null
@@ -1,36 +0,0 @@
-127.0.0.1 localhost
-127.0.1.1 knoppal
-
-#2001:192:168:3:206:5bff:feb8:abba cn CN
-#2001:192:168:100::3 ar11 AR11
-#2001:192:168:200::2 ar12 AR12
-#2001:192:168:101::2 ar21 AR21
-#2001:192:168:201::2 ar22 AR22
-#2001:192:168:100::2 ha1 HA1
-#2001:192:168:101::2 ha2 HA2
-#2001:192:168:106::2 ha HA
-
-
-# The following lines are desirable for IPv6 capable hosts
-::1 ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-2001:1::6 umts_ar
-2001:2f0:110:6000::1 umts_ar_eth1
-2001:1::7 wlan_ar
-2001:2f0:110:7000::1 wlan_ar_eth1
-2001:4::1 ha
-2001:4::3 cn_ha
-2001:4::20f:1fff:fe28:43e2 cn_coa cn
-2001:4::4 mr mr_ha
-2001:2f0:110:6000:201:2ff:fef5:aa4f mr_eth0
-2001:2f0:110:7000:20e:cff:fea2:cbcc mr_eth2
-
-2001:4:0:2::1 mr_nl
-2001:4:0:2:20e:a5ff:fe3f:57c4 mr_nl_eth0
-2001:4:0:2:218:8bff:feb0:50aa lfn_rd1
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/interfaces b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/interfaces
deleted file mode 100755
index 2d028e19bf0869e714518ea23c34fa9d1b48787c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/interfaces
+++ /dev/null
@@ -1,37 +0,0 @@
-auto lo
-iface lo inet loopback
-
-
-iface eth1 inet static
-address 192.168.1.1
-netmask 255.255.255.0
-
-auto eth1
-
-
-iface eth2 inet static
-address 192.168.100.2
-netmask 255.255.255.0
-
-
-
-iface eth0 inet static
-address 192.168.2.1
-netmask 255.255.255.0
-
-
-
-iface eth3 inet static
-address 192.168.12.144
-netmask 255.255.255.0
-gateway 192.168.12.100
-
-auto eth3
-
-
-
-
-
-auto eth2
-
-auto eth0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/mr_mcoa_sho.orignal.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/mr_mcoa_sho.orignal.conf
deleted file mode 100755
index 985facfea4f84ea85b1c070086a131fde4d8dea8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/mr_mcoa_sho.orignal.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This is an example of mip6d Mobile Node configuration file
-
-NodeConfig MN;
-
-## If set to > 0, will not detach from tty
-DebugLevel 10;
-
-## Support route optimization with other MNs
-DoRouteOptimizationCN disabled;
-
-## Use route optimization with CNs
-DoRouteOptimizationMN disabled;
-
-UseCnBuAck disabled;
-
-Interface "eth0" {
- Bid 100;
- BidPriority 1;
- Reliable true;
-}
-
-Interface "eth2" {
- Bid 200;
- BidPriority 1;
- Reliable false;
-}
-
-MnRouterProbes 1;
-
-MnHomeLink "eth0" {
- IsMobRtr enabled;
- MnUseSHO enabled;
-# MnUseSHO disabled;
-# MnUseAdaptiveCombining enabled;
- MnUseAdaptiveCombining disabled;
- HomeAgentAddress 2001:4::1;
- HomeAddress 2001:4::4/64 (2001:4:0:2::/64);
- RegMultipleCoA enabled;
- IfMultipleCoA "eth0", "eth2";
-
- # proto type code route opt.
-# MnRoPolicy ICMP 129 0 enabled;
-# MnRoPolicy ICMP any any disabled;
- # proto dst src route opt.
-# MnRoPolicy TCP 80 any enabled;
-# MnRoPolicy TCP any any disabled;
-}
-
-##
-## IPsec configuration
-##
-
-UseMnHaIPsec disabled;
-
-## Key Management Mobility Capability
-KeyMngMobCapability disabled;
-
-IPsecPolicySet {
- HomeAgentAddress 3ffe:2620:6:1::1;
- HomeAddress 3ffe:2620:6:1::1234/64;
-
- IPsecPolicy HomeRegBinding UseESP;
- IPsecPolicy MobPfxDisc UseESP;
- IPsecPolicy TunnelMh UseESP;
-}
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/nsswitch.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/nsswitch.conf
deleted file mode 100755
index b465c34cd8f987f853dec5ffceba648221673e48..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/nsswitch.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# /etc/nsswitch.conf
-#
-# Example configuration of GNU Name Service Switch functionality.
-# If you have the `glibc-doc' and `info' packages installed, try:
-# `info libc "Name Service Switch"' for information about this file.
-
-passwd: nis files
-group: nis files
-shadow: nis files
-
-hosts: nis files dns mdns
-networks: files
-
-protocols: db files
-services: db files
-ethers: db files
-rpc: db files
-
-netgroup: nis
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ntp.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ntp.conf
deleted file mode 100755
index 3055b17c32e57415540305ebc3bc515b12f32d72..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/ntp.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-# /etc/ntp.conf, configuration for ntpd
-
-driftfile /var/lib/ntp/ntp.drift
-
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
-
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
-
-
-# You do need to talk to an NTP server or two (or three).
-server ntp.ubuntu.com
-
-# By default, exchange time with everybody, but don't allow configuration.
-# See /usr/share/doc/ntp-doc/html/accopt.html for details.
-restrict -4 default kod notrap nomodify nopeer noquery
-restrict -6 default kod notrap nomodify nopeer noquery
-
-# Local users may interrogate the ntp server more closely.
-restrict 127.0.0.1
-restrict ::1
-
-# Clients from this (example!) subnet have unlimited access,
-# but only if cryptographically authenticated
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet,
-# de-comment the next lines. Please do this only if you trust everybody
-# on the network!
-#disable auth
-#broadcastclient
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/radvd.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/radvd.conf
deleted file mode 100755
index 8c56f4920001bb350fd2ecb7f14cfdeb4c4a6159..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/radvd.conf
+++ /dev/null
@@ -1,33 +0,0 @@
-interface eth0
-{
- AdvSendAdvert on;
-
- MaxRtrAdvInterval 4;
- MinRtrAdvInterval 1;
- AdvHomeAgentFlag on;
-
- prefix 2001:4::/64
- {
- AdvOnLink on;
- AdvAutonomous on;
- AdvRouterAddr on;
- };
-};
-
-
-interface eth1
-{
- AdvSendAdvert on;
-
- MaxRtrAdvInterval 4;
- MinRtrAdvInterval 1;
- AdvHomeAgentFlag off;
-
- prefix 2001:1::/64
- {
- AdvOnLink on;
- AdvAutonomous on;
- AdvRouterAddr on;
- };
-};
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/rc.local b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/rc.local
deleted file mode 100755
index 65634dfa4682aebf56d1ba99a222037abd74ccbd..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/rc.local
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/rc.local.cn.backup b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/rc.local.cn.backup
deleted file mode 100755
index 22bb8278fd33e1fa8581939109ffe1a05e06de59..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/rc.local.cn.backup
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-#CN ROLE FOR SHO
-sysctl -w net.ipv6.conf.all.accept_ra=1
-sysctl -w net.ipv6.conf.eth0.accept_ra=1
-sysctl -w net.ipv6.conf.all.forwarding=0
-ifconfig eth0 down
-ifconfig eth0 up
-echo "0" > /proc/sys/net/ipv4/tcp_window_scaling
-ifconfig eth0 mtu 1380
-ifconfig eth0 add 2001:4::3/64
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/resolv.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/resolv.conf
deleted file mode 100755
index e41d3fbda23c9c6db5686f10ae9abfd405bd872c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/HA/etc/resolv.conf
+++ /dev/null
@@ -1 +0,0 @@
-nameserver 192.168.12.100
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/HOtrigger.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/HOtrigger.sh
deleted file mode 100755
index 56cf642fc9eda250126916c65248588086381f55..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/HOtrigger.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# transfered from HA
-IF_UMTS=eth0
-IF_WLAN=eth2
-
-./waitfortime $1
-
-#Make-Before-Break HO
-#sleep 8
-#ifconfig $IF_WLAN up
-#ifconfig $IF_UMTS up
-
-#SHO(UPWARD)
-sleep 3
-ifconfig $IF_WLAN up
-sleep 10
-ifconfig $IF_UMTS down
-sleep 10
-ifconfig $IF_UMTS up
-sleep 10
-ifconfig $IF_WLAN down
-sleep 10
-ifconfig $IF_WLAN up
-sleep 10
-ifconfig $IF_UMTS down
-
-#SHO(DOWNWARD)
-#sleep 3
-#ifconfig $IF_UMTS up
-#sleep 11
-#ifconfig $IF_WLAN down
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/initMR.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/initMR.sh
deleted file mode 100755
index dc5bda88cf1ffd327396b13edddcb2beaf970755..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/initMR.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-KERNEL_LOGMR=/var/log/kmessages
-if [ -f $KERNEL_LOGMR ] ; then
- rm $KERNEL_LOGMR
-fi
-/etc/init.d/sysklogd restart
-ntpdate -b 2001:4::1
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/ip_config_mr_sho.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/ip_config_mr_sho.sh
deleted file mode 100755
index 9d806810acea82a8e6184e6dc6bd9714e48f467a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/ip_config_mr_sho.sh
+++ /dev/null
@@ -1,65 +0,0 @@
-#/bin/bash
-# File : ip_config_mr_sho.sh
-# Authors
-# Lionel Gauthier
-# Philippe Foubert
-# V1 2009 Fev 06
-DATE=`date +"%Y_%b_%d.%HH%MMin"`
-LOG_FILE="/opt/TESTBED_NEMO_MCOA_SHO/log/mr_sho_"$DATE".log"
-
-
-IF0=eth0
-IF1=eth1
-IF2=eth2
-NEMOD=`which mip6d`
-
-echo "Stopping radvd service"
-/etc/init.d/radvd stop
-echo "Shutting down all ethx interfaces"
-ifconfig $IF0 down
-ifconfig $IF1 down
-ifconfig $IF2 down
-
-echo "Flushing ip6tables"
-ip6tables -F
-sysctl -w net.ipv6.conf.all.accept_ra=0
-sysctl -w net.ipv6.conf.all.forwarding=1
-
-echo "Bringing up eth0, eth1"
-ifconfig $IF0 up
-ifconfig $IF1 up
-#ifconfig $IF2 up
-
-echo "Configuring address on NEMO link"
-ip -6 addr add 2001:4:0:2::1/64 dev $IF1
-echo "Starting radvd service"
-/etc/init.d/radvd start
-echo "Sleep 3 seconds"
-sleep 3
-
-echo "Lauching tcpdump s on all interfaces logs are in /opt/TESTBED_NEMO_MCOA_SHO/log folder"
-tcpdump -s 256 -i eth1 -v -w "/opt/TESTBED_NEMO_MCOA_SHO/log/mr_tcpdump_eth1_"$DATE".log" &
-tcpdump -s 256 -i eth2 -v -w "/opt/TESTBED_NEMO_MCOA_SHO/log/mr_tcpdump_eth2_"$DATE".log" &
-tcpdump -s 256 -i eth0 -v -w "/opt/TESTBED_NEMO_MCOA_SHO/log/mr_tcpdump_eth0_"$DATE".log" &
-
-echo "Starting NEMO daemon logfile is $LOG_FILE"
-$NEMOD -c /opt/TESTBED_NEMO_MCOA_SHO/etc/mr_mcoa_sho.conf 2>&1 | tee $LOG_FILE &
-
-sleep 20
-#ip6tables -A PREROUTING -t mangle -p icmpv6 --destination 2001:2f0:110:6000::1 -j MARK --set-mark 100
-#ip6tables -A PREROUTING -t mangle -p icmpv6 --destination 2001:2f0:110:7000::1 -j MARK --set-mark 200
-#ip6tables -A PREROUTING -t mangle --destination 2001:2f0:110:6000::1 -j MARK --set-mark 100
-#ip6tables -A PREROUTING -t mangle --destination 2001:2f0:110:7000::1 -j MARK --set-mark 200
-#ip6tables -A PREROUTING -t mangle --destination 2001:2f0:110:6000::1 -j MARK --set-mark 100
-#ip6tables -A PREROUTING -t mangle --destination 2001:2f0:110:7000::1 -j MARK --set-mark 200
-echo '\n\n####################################################'
-echo '# PACKETS ARE MARKED NOW YOU CAN START TRAFFIC #\n'
-echo '####################################################\n\n'
-echo "sleep 1 hour (type ctrl+C to end)"
-sleep 3600
-#killall tcpdump
-
-
-#tc qdisc add dev eth0 root netem loss 0%
-#tc qdisc add dev eth1 root netem loss 0%
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/params.sh b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/params.sh
deleted file mode 100755
index b152adb87371de669cfbb7476bbdd75d568ac21b..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/params.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-MR_IN_ADDR=10.0.1.3
-MR_IN_ADDR2=10.0.2.3
-MR_IN6_ADDR1=2001:2f0:110:6000:3d6:5200:300:1
-MR_IN6_ADDR2=2001:2f0:110:7000:3d6:5200:300:2
-
-CH1_IN_ADDR=10.0.1.1
-CH2_IN_ADDR=10.0.2.2
-
-CH1_IN6_ADDR=2001:2f0:110:6000::1
-CH1_IN6_LLADDR=fe80::3d6:5200:100:1
-CH2_IN6_ADDR=2001:2f0:110:7000::1
-CH2_IN6_LLADDR=fe80::3d6:4200:200:1
-
-LFN_IN_ADDR=192.168.2.222
-LFN_IN6_ADDR=2001:4:0:2:211:43ff:fe6f:66e1
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/start_mr_user b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/start_mr_user
deleted file mode 100755
index 2605a90113358786c4fb9e27c80050d1a516ac08..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/start_mr_user
+++ /dev/null
@@ -1,282 +0,0 @@
-#/bin/bash
-# File : ip_config_mr_sho.sh
-# Authors
-# Lionel Gauthier
-# Philippe Foubert
-# V1 2009 Fev 06
-######################################################################
-DEMO_DIR=$OPENAIR3_DIR"/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR"
-DATE=`date +"%Y_%b_%d.%HH%MMin"`
-LOG_FILE=$DEMO_DIR"/log/mr_sho_"$DATE".log"
-IF0=eth0
-IF1=eth1
-IF2=eth2
-NEMOD=`which mip6d`
-source $DEMO_DIR"/bin/params.sh"
-######################################################################
-black='\E[30m'
-red='\E[31m'
-green='\E[32m'
-yellow='\E[33m'
-blue='\E[34m'
-magenta='\E[35m'
-cyan='\E[36m'
-white='\E[37m'
-
-check_ch1 ()
-{
-#check ipv4 connectivity
- echo_warning "CHECKING IPV4/nasmesh0 CH1"
- lskdfto 2>/dev/null
- while [ $? -ne 0 ]; do
- ping -c 2 $CH1_IN_ADDR
- done
- echo_success "CH1 IPV4 CONNECTIVITY OK"
-#check ipv6 connectivity
- echo_warning "CHECKING IPV6/nasmesh0 CH1"
- lskdfto 2>/dev/null
- while [ $? -ne 0 ]; do
- ping6 -I nasmesh0 -c 2 $CH1_IN6_LLADDR
- done
- echo_success "CH1 IPV6 CONNECTIVITY OK"
-}
-check_ch2 ()
-{
-#check ipv4 connectivity
- echo_warning "CHECKING IPV4/nasmesh1 CH2"
- lskdfto 2>/dev/null
- while [ $? -ne 0 ]; do
- ping -c 2 $CH2_IN_ADDR
- done
- echo_success "CH2 IPV4 CONNECTIVITY OK"
-#check ipv6 connectivity
- echo_warning "CHECKING IPV6/nasmesh1 CH2"
- lskdfto 2>/dev/null
- while [ $? -ne 0 ]; do
- ping6 -I nasmesh1 -c 2 $CH2_IN6_LLADDR
- done
- echo_success "CH2 IPV6 CONNECTIVITY OK"
-}
-check_lfn ()
-{
-#check ipv4 connectivity
- echo_warning "CHECKING IPV4 LFN"
- lskdfto 2>/dev/null
- while [ $? -ne 0 ]; do
- ping -c 2 $LFN_IN_ADDR
- done
- echo_success "LFN IPV4 CONNECTIVITY OK"
-#check ipv6 connectivity
- echo_warning "CHECKING IPV6 LFN"
- lskdfto 2>/dev/null
- while [ $? -ne 0 ]; do
- ping6 -c 2 $LFN_IN6_ADDR
- done
- echo_success "LFN IPV6 CONNECTIVITY OK"
-}
-
-######################################################################
-cecho() # Color-echo
- # arg1 = message
- # arg2 = color
-{
-local default_msg="No Message."
- message=${1:-$default_msg}
- color=${2:-$black}
- echo -e "$color"
- echo -n "$message"
- tput sgr0
- echo
- return
-}
-
-echo_error() {
-local my_string=""
- until [ -z "$1" ]
- do
- my_string="$my_string$1"
- shift
- done
- cecho "$my_string" $red
-}
-
-echo_warning() {
-local my_string=""
- until [ -z "$1" ]
- do
- my_string="$my_string$1"
- shift
- done
- cecho "$my_string" $yellow
-}
-
-echo_success() {
-local my_string=""
- until [ -z "$1" ]
- do
- my_string="$my_string$1"
- shift
- done
- cecho "$my_string" $green
-}
-
-isanumber () {
- echo $1 | egrep "^[0-9]+$" > /dev/null 2>&1
- if [ "$?" -eq "0" ]; then
- # The grep found only 0-9, so it's an integer. We can safely do a test on it.
- return 0
- else
- # If the grep found something other than 0-9, then it's not an integer.
- return 2
- fi
-}
-wait_process_started () {
- if [ -z "$1" ]
- then
- echo_error "WAITING FOR PROCESS START: NO PROCESS"
- return 1
- fi
- while [ `ps -C $1` -neq 0 ]; do
- echo_warning "WAITING FOR $1 START"
- sleep 2
- done
- echo_success "PROCESS $1 STARTED"
- return 0
-}
-######################################################################
-echo_warning "Stopping radvd service"
-/etc/init.d/radvd stop
-#/etc/init.d/radvd start
-#sleep 2
-#/etc/init.d/radvd stop
-echo_warning "Shutting down all ethx interfaces"
-ip link set $IF0 down
-ip link set $IF1 down
-ip link set $IF2 down
-
-echo_warning "Flushing ip6tables"
-ip6tables -F
-sysctl -w net.ipv6.conf.all.accept_ra=0
-sysctl -w net.ipv6.conf.all.forwarding=1
-
-echo_warning "Bringing up eth0, eth1"
-ip link set $IF0 up
-ip link set $IF1 up
-ip link set $IF2 up
-
-echo_warning "Configuring address on NEMO link"
-ip -6 addr add 2001:4:0:2::1/64 scope global dev $IF1
-######################################################################
-killall -q mac_sim_rrm rrm emul_int xterm
-
-cd $OPENAIR2_DIR
-sudo rmmod nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh_mr.ko nas_IMEI=0x12345678,0x03000000
-
-echo_warning "Classification rule for DTCH-Broadcast -reception of Router Advertisement"
-
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02:0:0:0:0:0:0:1 -r 3 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff02::2 -y ff02:0:0:0:0:0:0:2 -r 3 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x ff02::3 -y ff02:0:0:0:0:0:0:3 -r 3 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -x $MR_IN6_ADDR1 -y 2001:2f0:110:6000:0:0:0:1 -r 4 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -x $MR_IN6_ADDR1 -y 2001:1:0:0:0:0:0:6 -r 4 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -x $MR_IN6_ADDR1 -y 2001:4:0:0:0:0:0:1 -r 4 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -x $MR_IN6_ADDR1 -y fe80:0:0:0:3d6:5200:100:1 -r 4 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $MR_IN_ADDR -t $CH1_IN_ADDR -r 4 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i1 -z0 -x ff02::1 -y ff02:0:0:0:0:0:0:1 -r 11 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i1 -z0 -x ff02::2 -y ff02:0:0:0:0:0:0:2 -r 11 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i1 -z0 -x ff02::3 -y ff02:0:0:0:0:0:0:3 -r 11 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i1 -z0 -x $MR_IN6_ADDR2 -y 2001:2f0:110:7000:0:0:0:1 -r 12 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i1 -z0 -x $MR_IN6_ADDR2 -y 2001:1:0:0:0:0:0:7 -r 12 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i1 -z0 -x $MR_IN6_ADDR2 -y 2001:4:0:0:0:0:0:1 -r 12 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i1 -z0 -x $MR_IN6_ADDR2 -y fe80:0:0:0:3d6:4200:200:1 -r 12 > /dev/null
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i1 -z0 -s $MR_IN_ADDR2 -t $CH2_IN_ADDR -r 12 > /dev/null
-
-echo_warning "Setting nasmesh1 interface"
-ip link set nasmesh1 up
-ip -4 addr add $MR_IN_ADDR2/24 broadcast 10.0.2.255 dev nasmesh1
-sysctl -w net.ipv6.conf.nasmesh1.accept_ra=0
-sysctl -w net.ipv6.conf.nasmesh1.forwarding=1
-
-
-echo_warning "Setting nasmesh0 interface"
-ip link set nasmesh0 up
-ip -4 addr add $MR_IN_ADDR/24 broadcast 10.0.1.255 dev nasmesh0
-sysctl -w net.ipv6.conf.nasmesh0.accept_ra=0
-sysctl -w net.ipv6.conf.nasmesh0.forwarding=1
-
-
-route add -net 224.0.0.0 netmask 240.0.0.0 dev eth2
-echo_warning "Starting radvd service"
-/etc/init.d/radvd start
-#sleep 3
-######################################################################
-sudo rm -f /tmp/*socket*
-cd $OPENAIR3_DIR/MESH/RRM/
-xterm -T RRM -hold -e sh rrm_idromel.sh &
-sleep 5
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-xterm -e ./mac_sim_rrm -m2 -t ../../TOPOLOGIES/eth_2chs_1node.top &
-wait_process_started mac_sim
-sleep 3
-check_ch1
-check_ch2
-check_lfn
-ip link set nasmesh1 down
-check_ch1
-check_lfn
-######################################################################
-sleep 5
-echo_warning "Starting NEMO daemon logfile is $LOG_FILE"
-xterm -e $NEMOD -c $DEMO_DIR/etc/mr_mcoa_sho.conf 2>&1 | tee $LOG_FILE &
-
-wait_process_started mip6d
-
-
-read user_keyboard
-ip link set nasmesh1 up
-echo '######################################################################'
-echo "nasmesh1 is UP"
-echo '######################################################################'
-read user_keyboard
-ip link set nasmesh1 down
-echo '######################################################################'
-echo "nasmesh1 is DOWN"
-echo '######################################################################'
-read user_keyboard
-ip link set nasmesh1 up
-echo '######################################################################'
-echo "nasmesh1 is UP"
-echo '######################################################################'
-read user_keyboard
-ip link set nasmesh0 down
-echo '######################################################################'
-echo "nasmesh0 is DOWN"
-echo '######################################################################'
-read user_keyboard
-ip link set nasmesh0 up
-echo '######################################################################'
-echo "nasmesh0 is UP"
-echo '######################################################################'
-read user_keyboard
-ip link set nasmesh1 down
-echo '######################################################################'
-echo "nasmesh1 is DOWN"
-echo '######################################################################'
-
-#echo "Lauching tcpdump s on all interfaces logs are in /opt/TESTBED_NEMO_MCOA_SHO/log folder"
-#tcpdump -s 256 -i eth1 -v -w $DEMO_DIR"/log/mr_tcpdump_eth1_"$DATE".log" &
-#tcpdump -s 256 -i nasmesh0 -v -w $DEMO_DIR"/log/mr_tcpdump_nasmesh0_"$DATE".log" &
-#tcpdump -s 256 -i nasmesh1 -v -w $DEMO_DIR"/log/mr_tcpdump_nasmesh1_"$DATE".log" &
-
-echo '######################################################################'
-ip link show
-echo '######################################################################'
-ip addr show
-echo '######################################################################'
-######################################################################
-
-echo "sleep 1 hour (type ctrl+C to end)"
-sleep 3600
-
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/waitfortime b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/waitfortime
deleted file mode 100755
index c37d9d9a13c32e0943c991fe405652d12b49228b..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/bin/waitfortime and /dev/null differ
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/config.gz b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/config.gz
deleted file mode 100755
index 7537d2290b4151a7b706b45ed363de956cda4e11..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/config.gz and /dev/null differ
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/hosts b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/hosts
deleted file mode 100755
index 40e8d0f2288ac6178ab0ad5a0d561e54186fd79c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/hosts
+++ /dev/null
@@ -1,15 +0,0 @@
-127.0.0.1 localhost
-127.0.1.1 teraclope-desktop
-
-2001:192:168:106::2 ha HA
-2001:192:168:106::4 cn CN
-
-
-192.168.12.100 carne
-# The following lines are desirable for IPv6 capable hosts
-::1 ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/interfaces b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/interfaces
deleted file mode 100755
index 090b1c5ed43749eb7188aa7c9e80acd360a8d930..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/interfaces
+++ /dev/null
@@ -1,30 +0,0 @@
-auto lo
-iface lo inet loopback
-
-
-iface eth0 inet static
-address 192.168.210.85
-netmask 255.255.255.0
-#gateway 192.168.12.100
-
-auto eth0
-
-iface eth2 inet static
-address 192.168.100.85
-netmask 255.255.255.0
-
-auto eth2
-
-iface eth1 inet static
-address 192.168.2.1
-netmask 255.255.255.0
-
-auto eth1
-
-
-iface eth3 inet static
-address 192.168.12.86
-netmask 255.255.255.0
-gateway 192.168.12.100
-
-auto eth3
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/mr_mcoa_sho.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/mr_mcoa_sho.conf
deleted file mode 100755
index 1b3aec89f4b54d53485682b2d8ae9406376ed4f9..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/mr_mcoa_sho.conf
+++ /dev/null
@@ -1,68 +0,0 @@
-# This is an example of mip6d Mobile Node configuration file
-
-NodeConfig MN;
-
-## If set to > 0, will not detach from tty
-DebugLevel 10;
-
-## Support route optimization with other MNs
-DoRouteOptimizationCN disabled;
-
-## Use route optimization with CNs
-DoRouteOptimizationMN disabled;
-
-
-
-UseCnBuAck disabled;
-
-# We use explicit Mode
-#MobRtrUseExplicitMode enabled;
-
-
-Interface "nasmesh0" {
- Bid 100;
- BidPriority 1;
- Reliable true;
- DefaultDelay 0;
- #LGIDROReliable false;
- #LGIDRODefaultDelay 3000;
-}
-
-Interface "nasmesh1" {
- Bid 200;
- #LG WAS 1 IDRO
- BidPriority 10;
- Reliable true;
- DefaultDelay 0;
-}
-
-MnRouterProbes 1;
-
-MnHomeLink "nasmesh0" {
- IsMobRtr enabled;
- MnUseSHO enabled;
-# MnUseSHO disabled;
-# MnUseAdaptiveCombining enabled;
- MnUseAdaptiveCombining disabled;
- HomeAgentAddress 2001:4::1;
- HomeAddress 2001:4::4/64 (2001:4:0:2::/64);
- RegMultipleCoA enabled;
- IfMultipleCoA "nasmesh0", "nasmesh1";
-
- # proto type code route opt.
-# MnRoPolicy ICMP 129 0 enabled;
-# MnRoPolicy ICMP any any disabled;
- # proto dst src route opt.
-# MnRoPolicy TCP 80 any enabled;
-# MnRoPolicy TCP any any disabled;
-}
-
-##
-## IPsec configuration
-##
-
-UseMnHaIPsec disabled;
-
-## Key Management Mobility Capability
-KeyMngMobCapability disabled;
-
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/nsswitch.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/nsswitch.conf
deleted file mode 100755
index b465c34cd8f987f853dec5ffceba648221673e48..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/nsswitch.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-# /etc/nsswitch.conf
-#
-# Example configuration of GNU Name Service Switch functionality.
-# If you have the `glibc-doc' and `info' packages installed, try:
-# `info libc "Name Service Switch"' for information about this file.
-
-passwd: nis files
-group: nis files
-shadow: nis files
-
-hosts: nis files dns mdns
-networks: files
-
-protocols: db files
-services: db files
-ethers: db files
-rpc: db files
-
-netgroup: nis
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/radvd.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/radvd.conf
deleted file mode 100755
index 0a8a9d415e7818d0ed52abe7b1d9b21ec877a44f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/radvd.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-interface eth1
-{
- AdvSendAdvert on;
-
- MaxRtrAdvInterval 4;
- MinRtrAdvInterval 1;
- AdvHomeAgentFlag off;
-#
-# new EUI-64 prefixes
-#
- prefix 2001:4:0:2::/64
- {
- AdvOnLink on;
- AdvAutonomous on;
- AdvRouterAddr on;
- };
-};
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/rc.local b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/rc.local
deleted file mode 100755
index 6fbdb22e8a4c40391656ef243a1169b8a0e88422..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/rc.local
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-
-exit 0
diff --git a/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/resolv.conf b/openair3/EXAMPLES/IDROMEL_DEMO_NEMO_MCOA_SHO/MR/etc/resolv.conf
deleted file mode 100755
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..0000000000000000000000000000000000000000
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_conf_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/ch_conf_nas.sh
deleted file mode 100755
index c795d5b311577ef748aa9ef6540a3689c6d7449a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_conf_nas.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani, Raymond Knopp
-
-source params.sh
-echo Clusterhead address is $CH_ADDR
-
-sleep 1
-echo Launching AS and RF
-./start_openair.sh 1 0
-
-sleep 1
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH_ADDR -y $MR1_IN_ADDR -r 12
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-#CH<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
-#CH<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_LABEL_IN -m $MR2_LABEL_OUT -r 21
-
-#CH Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH_ADDR -y ff02::1 -r 3
-
-echo Configuring interfaces on CH
-# Setup IPv4 multicast route for openair emulation
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add 10.0.0.1/24 dev nasmesh0
-sudo ip -6 addr add $CH_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH_ADDR
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-
-
-#/etc/init.d/radvd restart
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_del_mpls.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/ch_del_mpls.sh
deleted file mode 100755
index 69025b15dc0e0ff1b318424f76959952772a6d8a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_del_mpls.sh
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/bash
-
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-echo Deleting all mpls settings ...
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-#parse by line, if there are multiple lines
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- sleep 1
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
-var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
-
-#test Philippe
-var5=`tc qdisc show |grep nasmesh0 |grep htb`
- if [ ! -z "$var5" ]; then
- tc qdisc del dev nasmesh0 root
- echo "tc clear nasmesh0"
- fi
-
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_mpls_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/ch_mpls_nas.sh
deleted file mode 100755
index 050b11cd06ee1f4c7bc0210387e02e62aa4dc229..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_mpls_nas.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/bash
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS for CH
-modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- mpls labelspace set dev nasmesh0 labelspace 0
- mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
- var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: ch_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
-
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/ch_nas.sh
deleted file mode 100755
index ea5004bdc88668474e51fd90c713cd1d15d73155..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/ch_nas.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-#Phil,lamia 10 Oct 08
-
-###Without PMIP
-source params.sh
-sudo ./ch_conf_nas.sh
-sudo ./ch_mpls_nas.sh $MR1_LABEL_OUT $MR2_IN_ADDR $MR2_LABEL_IN
-sudo ./ch_mpls_nas.sh $MR2_LABEL_OUT $MR1_IN_ADDR $MR1_LABEL_IN
-echo /openair3/pmip6d/pmip6d -c -L $CH_ADDR
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH_ADDR" &
-#./ch_del_mpls.sh
-
-watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-
-./stop_rf.sh
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mn1_conf.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mn1_conf.sh
deleted file mode 100755
index a1d931b525de1c1512ae2787680efba4ca25ee42..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mn1_conf.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-#Huu-Nghia, Philippe, Lamia 28 june 2008
-
-#echo Deleting MN1 autoconfigured addresse
-#$OPENAIR3_SCRIPTS_PATH/mn1_del.sh
-
-#ip -6 route add 2001:660:5502::25/128 via 2001:660:5502::10 dev eth0
-
-ip -6 addr del 2001:660:5502::15/64 dev eth0
-ip -6 addr add 2001:660:5502::15/64 dev eth0
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_conf_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_conf_nas.sh
deleted file mode 100755
index 88bdb1216b122a5af859413874f09bd5491ee818..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_conf_nas.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani, Raymond Knopp
-
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 1 8
-
-#Sleep to allow L2 modules to load
-sleep 1
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Configuring interfaces on mr1
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.1.2
-sudo ip -6 addr add 2001:10:0:1:7856:3412:0:2/64 dev nasmesh0
-
-
-#echo "Waiting for Router ADV from CH (DTCH Broadcast test)"
-#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#while [ -z $IPv6ADR ] ; do
-# sleep 1
-# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#done
-#echo Got Router ADV : IPv6 address is $IPv6ADR
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH_ADDR -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:2 -y $CH_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-echo eth0 is $MR1_EG_ADDR
-
-#echo Starting routing ...
-#echo No MPLS debug
-#echo "1" >/sys/mpls/debug
-
-
-
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_mpls_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_mpls_nas.sh
deleted file mode 100755
index 80fea26a46261e4de7b77c41a1e8a7467f1d7c61..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_mpls_nas.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-# Script by Lamia Romdhani, Nghia, Philippe 08 july 2008
-# June 2008
-
-source params.sh
-sudo modprobe mpls6
-echo Setting MPLS for mr1
-
-echo "0" > /sys/mpls/debug
-
-echo 'MN2->MN1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH_ADDR | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN2_ADDR/128 via $CH_ADDR mpls $var
-sudo ip -6 route add $MN1_ADDR/128 dev eth0
-
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_nas.sh
deleted file mode 100755
index b5546c150d35ddbba95f81f8f46d88626fe4df9f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr1_nas.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#Phil, Lamia 10 Oct 08
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-./mr1_conf_nas.sh
-./mr1_mpls_nas.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR1_EG_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH_ADDR -N $MR1_EG_ADDR -E $MR1_IN_ADDR" &
-#$OPENAIR3_SCRIPTS_PATH/mr1_del_mpls.sh
-
-watch -n.1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
-
-./stop_rf.sh
-./ch_del_mpls.sh
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_conf_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_conf_nas.sh
deleted file mode 100755
index 8fd5ec51f3c73b3c89cb11efd3702db02e701212..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_conf_nas.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani, Raymond Knopp
-
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-
-echo Launching AS and RF
-./start_openair.sh 1 9
-
-#Sleep to allow L2 modules to load
-sleep 1
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-
-echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-echo Configuring interfaces on mr2
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 10.0.1.3
-sudo ip -6 addr add 2001:10:0:1:7856:3412:0:3/64 dev nasmesh0
-
-
-#echo "Waiting for Router ADV from CH (DTCH Broadcast test)"
-#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#while [ -z $IPv6ADR ] ; do
-# sleep 1
-# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
-#done
-#echo Got Router ADV : IPv6 address is $IPv6ADR
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH_ADDR -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:3 -y $CH_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-echo eth0 is $MR2_EG_ADDR
-
-#echo Starting routing ...
-#echo No MPLS debug
-#echo "1" >/sys/mpls/debug
-
-
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_del_mpls.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_del_mpls.sh
deleted file mode 100755
index 905ab047453c537981ea926dbc0bd34331156529..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_del_mpls.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/bin/bash
-
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by Nghia and Philippe - 8 July 08
-source params.sh
-ip -6 route del $MN1_ADDR/128 via $CH_ADDR
-ip -6 route del $MN2_ADDR/128 dev eth0
-
-echo Deleting all mpls settings ...
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-#parse by line, if there are multiple lines
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_mpls_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_mpls_nas.sh
deleted file mode 100755
index 053f944ab66bfc9074a2492c2a493cb0ceb1beac..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-echo "0" >/sys/mpls/debug
-
-echo Setting MPLS for mr2
-echo 'MN2->MN1'
-# add label 2000 and forward the packets to mr2 , for destination MN1
-
-#Changed by Huu-Nghia, Philippe
-var=`mpls nhlfe add key 0 instructions push gen $MR2_LABEL_OUT nexthop nasmesh0 ipv6 $CH_ADDR |grep key | cut -c 17-26`
-sudo ip -6 route add $MN1_ADDR/128 via $CH_ADDR mpls $var
-sudo ip -6 route add $MN2_ADDR/128 dev eth0
-
-echo 'MN1->MN2'
-#pop label 1001 and do Ip lookup.
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen 1001 labelspace 0 proto ipv6
-
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_nas.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_nas.sh
deleted file mode 100755
index 6e327dd5048e92d4d30b72f9f149d1c6e021e8cb..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/mr2_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-#Lamia, Philippe huu nghia, 10 Oct 08
-source params.sh
-
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./mr2_del_mpls.sh
-./mr2_conf_nas.sh
-./mr2_mpls_nas.sh
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig eth0 promisc
-sudo ip -6 addr add $MR2_EG_ADDR/64 dev eth0
-sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH_ADDR -N $MR2_EG_ADDR -E $MR2_IN_ADDR" &
-#$OPENAIR3_SCRIPTS_PATH/mr2_del_mpls.sh
-
-#telnet localhost 7777 and then type pmip to see all binding entries
-#ip -6 rule
-#ip -6 route
-
-
-watch -n.1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
-
-./stop_rf.sh
-./ch_del_mpls.sh
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/params.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/params.sh
deleted file mode 100755
index ee605ced0e9cd8681eb410e3730b65f2a9a78775..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/params.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/bash
-MR1_IN_ADDR=2001:10:0:1:7856:3412:0:2
-MR1_EG_ADDR=2001:660:5502::10
-MR1_LABEL_IN=2001
-MR1_LABEL_OUT=1000
-
-MR2_IN_ADDR=2001:10:0:1:7856:3412:0:3
-MR2_EG_ADDR=2001:660:5502::20
-MR2_LABEL_IN=1001
-MR2_LABEL_OUT=2000
-
-CH_ADDR=2001:10:0:1:7856:3412:0:1
-
-#MN1_ADDR=2001:660:5502::211:43ff:fe6f:66e1
-#MN2_ADDR=2001:660:5502::211:43ff:fe75:cfc0
-
-MN1_ADDR=2001:660:5502::15
-MN2_ADDR=2001:660:5502::25
-
-OPENAIR3_HOME=/homes/knopp/Devel/openair/trunk/openair3
-OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/PMIP6D
-OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts/static
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/start_openair.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/start_openair.sh
deleted file mode 100755
index f6c1c277d9c9797713a46b3fd77503e1cb1efe8d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/start_openair.sh
+++ /dev/null
@@ -1,127 +0,0 @@
-if [ "$1" == "" ]; then
- echo "Please provide a TX power level (0-8)"
- exit
-fi
-
-if [ "$2" == "" ]; then
- echo "Please provide a Node ID (0-7 for CH, 8-15 for MR/UE)"
- exit
-fi
-
-if [ "$OPENAIR1_DIR" == "" ] ; then
- echo "Please set OPENAIR1_DIR environment variable"
- exit
-else
- echo "OPENAIR1_DIR Set to $OPENAIR1_DIR"
-fi
-
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-source ./txgains.sh
-
-case $1 in
- 0)
- CBMIMO1_POWER=$CBMIMO1_m20_dBm
- echo "Configuring CBMIMO1 for -20dBm ($CBMIMO1_POWER)"
- ;;
- 1)
- CBMIMO1_POWER=$CBMIMO1_m15_dBm
- echo Configuring CBMIMO1 for -15dBm
- ;;
- 2)
- CBMIMO1_POWER=$CBMIMO1_m10_dBm
- echo Configuring CBMIMO1 for -10dBm
- ;;
- 3)
- CBMIMO1_POWER=$CBMIMO1_m5_dBm
- echo Configuring CBMIMO1 for -5dBm
- ;;
- 4)
- CBMIMO1_POWER=$CBMIMO1_0_dBm
- echo Configuring CBMIMO1 for 0dBm
- ;;
- 5)
- CBMIMO1_POWER=$CBMIMO1_5_dBm
- echo Configuring CBMIMO1 for 5dBm
- ;;
- 6)
- CBMIMO1_POWER=$CBMIMO1_10_dBm
- echo Configuring CBMIMO1 for 10dBm
- ;;
- 7)
- CBMIMO1_POWER=$CBMIMO1_15_dBm
- echo Configuring CBMIMO1 for 15dBm
- ;;
- 8)
- CBMIMO1_POWER=$CBMIMO1_20_dBm
- echo Configuring CBMIMO1 for 20dBm
- ;;
- *)
- echo Invalid TX power
- exit
-esac
-
-
-echo Removing openair_rf,openair_l2 and openair_rrc modules
-sudo rmmod -f openair_rrc
-sudo rmmod -f openair_l2
-sudo rmmod -f openair_rf
-
-sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_l2.ko
-OARF_RET=`lsmod | grep -e openair_rf`
-
-if [ "$OARF_RET" = "" ]; then
- echo Error loading openair1 module
- exit
-fi
-
-sudo insmod $OPENAIR2_DIR/LAYER2/openair_layer2.ko
-OA2_RET=`lsmod | grep -e openair_l2`
-
-if [ "$OA2_RET" = "" ]; then
- echo Error loading openair2 module
- exit
-fi
-
-
-sudo insmod $OPENAIR2_DIR/RRC/MESH/openair_RRC.ko
-OARRC_RET=`lsmod | grep -e openair_rrc`
-if [ "$OARRC_RET" = "" ]; then
- echo Error loading openair RRC module
- exit
-fi
-
-OA_DEV="/dev/openair0"
-
-if [ -c "$OA_DEV" ]; then
- echo "$OA_DEV exists"
-else
- echo "creating $OA_DEV"
- sudo mknod $OA_DEV c 127 0
- sudo chmod a+rw /dev/openair0
-fi
-
-./openair_rf_cbmimo1 1 0
-./openair_rf_cbmimo1 1 6 $CBMIMO1_POWER
-if [ $2 -lt "8" ]; then
- ./openair_rf_cbmimo1 1 1 1 $2
-elif [ $2 -lt "16" ]; then
- ./openair_rf_cbmimo1 1 3 1 $2
-else
- echo Illegal Node ID, exiting
- exit
-fi
-
-sleep 1
-
-
-# Watch the status of the radio to check for hardware exit event
-
-#OA1_STATE=`cat /proc/openair1/openair1_state`
-
-#while [ "$OA1_STATE" != "EXITED" ]; do
-# OA1_STATE=`cat /proc/openair1/openair1_state`
-# sleep .5
-#done
-
-#./openair_rf_cbmimo1 1 4 1
-#echo CBMIMO1 Hardware exit, restarting ...
diff --git a/openair3/EXAMPLES/MONO_CH_200810_RF/stop_rf.sh b/openair3/EXAMPLES/MONO_CH_200810_RF/stop_rf.sh
deleted file mode 100755
index 54ceae79346c7d3d32a3df5d062c9f38be217126..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MONO_CH_200810_RF/stop_rf.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
-./openair_rf_cbmimo1 1 4 1
-sudo killall chbch_scope
-sudo killall sach_scope
-sudo rmmod nasmesh
-sudo rmmod openair_rrc
-sudo rmmod openair_l2
-sudo rmmod openair_rf
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch1 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch1
deleted file mode 100644
index e5bd5a6c23b35e67bc768a52a1cfdd6088b8403d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch1
+++ /dev/null
@@ -1,24 +0,0 @@
-# Configuration file of CH1 (SP4-Wimaxhead1)
-# side linked to MR1 (Chorist Edge 1) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to MR2 (SP4-Wimaxrelay-2) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.30.10.10,226.40.10.10
-groupes=226.30.10.11,226.40.10.11
-groupes=226.30.10.12,226.40.10.12
-groupes=226.30.10.13,226.40.10.13
-groupes=226.30.10.14,226.40.10.14
-groupes=226.30.10.15,226.40.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch2 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch2
deleted file mode 100644
index 69a72ff2450ab9f4befe9a707b421c2fce9f4aa4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch2
+++ /dev/null
@@ -1,24 +0,0 @@
-# Configuration file of CH1 (SP4-Wimaxhead2)
-# side linked to MR2 (SP4-Wimaxrelay-2) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to MR3 (SP4-Edge2) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.50.10.10,226.30.10.10
-groupes=226.50.10.11,226.30.10.11
-groupes=226.50.10.12,226.30.10.12
-groupes=226.50.10.13,226.30.10.13
-groupes=226.50.10.14,226.30.10.14
-groupes=226.50.10.15,226.30.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn1 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn1
deleted file mode 100644
index b0f7d27317a1cd52e62f80725a99341f38e1b3ca..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn1
+++ /dev/null
@@ -1,26 +0,0 @@
-# Configuration file of MN1 (Dieppe)
-# side linked to EADS End-users (Wifi side) : name of interface, IPv4, TTL
-int_1=wifi0
-ipv_1=4
-ttl_1=65
-
-# side linked to MR1 (CHORIST-Edge1): name of interface, IPv4, TTL
-int_2=eth0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=224.0.55.55,224.0.66.66
-groupes=226.10.10.10,226.20.10.10
-groupes=226.10.10.11,226.20.10.11
-groupes=226.10.10.12,226.20.10.12
-groupes=226.10.10.13,226.20.10.13
-groupes=226.10.10.14,226.20.10.14
-groupes=226.10.10.15,226.20.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn2 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn2
deleted file mode 100644
index a29529cfa198232cb2a4c60fa1f167c1f8a202ed..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn2
+++ /dev/null
@@ -1,25 +0,0 @@
-# Configuration file of MN2 (Sarlat)
-# side linked to MR3 (CHORIST-Edge2) : name of interface, IPv4, TTL
-int_2=eth0
-ipv_2=4
-ttl_2=65
-
-# side linked to EADS End-users (Wifi side) : name of interface, IPv4, TTL
-int_1=wifi0
-ipv_1=4
-ttl_1=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.20.10.10,226.10.10.10
-groupes=226.20.10.11,226.10.10.11
-groupes=226.20.10.12,226.10.10.12
-groupes=226.20.10.13,226.10.10.13
-groupes=226.20.10.14,226.10.10.14
-groupes=226.20.10.15,226.10.10.15
-
-#Port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr1 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr1
deleted file mode 100644
index d67cf80ba00a59ca8c7ca610da6efd19c23d7c0d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr1
+++ /dev/null
@@ -1,26 +0,0 @@
-# Configuration file MR1 (Chorist-Edge1)
-# side linked to MN1 (DIEPPE) : name of interface, IPv4, TTL
-int_1=eth0
-ipv_1=4
-ttl_1=65
-
-# side linked to CH1 (SP4-Wimaxhead1) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.20.10.10,226.30.10.10
-groupes=226.20.10.11,226.30.10.11
-groupes=226.20.10.12,226.30.10.12
-groupes=226.20.10.13,226.30.10.13
-groupes=226.20.10.14,226.30.10.14
-groupes=226.20.10.15,226.30.10.15
-
-# different port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr2 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr2
deleted file mode 100644
index a0ec0e1f3cd9bf1b5890302d4a5d61b846ee3085..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr2
+++ /dev/null
@@ -1,27 +0,0 @@
-# Configuration file MR2 (SP4-Wimaxrelay-2)
-# side linked to CH1 (SP4-Wimaxhead1) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to CH1 (SP4-Wimaxhead2) : name of interface, IPv4, TTL
-int_2=nasmesh0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.40.10.10,226.50.10.10
-groupes=226.40.10.11,226.50.10.11
-groupes=226.40.10.12,226.50.10.12
-groupes=226.40.10.13,226.50.10.13
-groupes=226.40.10.14,226.50.10.14
-groupes=226.40.10.15,226.50.10.15
-
-
-# different port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr3 b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr3
deleted file mode 100644
index f998c448ee4861c7c3032547b81fe2980fad1315..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr3
+++ /dev/null
@@ -1,25 +0,0 @@
-# Configuration file MR3 (Chorist-Edge2)
-# side linked to CH2 (SP4-Wimaxhead2) : name of interface, IPv4, TTL
-int_1=nasmesh0
-ipv_1=4
-ttl_1=65
-
-# side linked to MN2 (SARLAT) : name of interface, IPv4, TTL
-int_2=eth0
-ipv_2=4
-ttl_2=65
-
-#multicast group label on side 1 then group label on side 2
-groupes=226.30.10.10,226.20.10.10
-groupes=226.30.10.11,226.20.10.11
-groupes=226.30.10.12,226.20.10.12
-groupes=226.30.10.13,226.20.10.13
-groupes=226.30.10.14,226.20.10.14
-groupes=226.30.10.15,226.20.10.15
-
-# different port ranges
-ports=1234,1234
-ports=6300,6308
-ports=6340,6348
-ports=6360,6368
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector
deleted file mode 100644
index fb49d3273c2623b548ba90842de1e8ba114664c2..0000000000000000000000000000000000000000
Binary files a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector and /dev/null differ
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector-forwarding-v4.c b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector-forwarding-v4.c
deleted file mode 100644
index ebbd33d770cb4f970eeaf5bb8b1e460492e94179..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector-forwarding-v4.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/*******************************/
-/* reflector-forwarding-v4m by */
-/*******************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <strings.h>
-#include <netdb.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/unistd.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <sys/signal.h>
-#include <sys/param.h>
-#include <errno.h>
-#include <arpa/inet.h>
-#include <pthread.h>
-#include <syslog.h>
-/* To get ifreq */
-#include <arpa/inet.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-#include <limits.h>
-
-#include <netinet/in_systm.h>
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-
-#define _PATH_PROCNET_IFINET6 "/proc/net/if_inet6"
-#define MSGBUF_SIZE 32768
-#define IFNAMSIZE 11
-#define INLINE inline __attribute__((always_inline))
-struct ipaddr_str {
- char buf[MAX(INET6_ADDRSTRLEN, INET_ADDRSTRLEN)];
-};
-int IP_VERSION;
-static INLINE const char *ip4_to_string(struct ipaddr_str * const buf, const struct in_addr addr4)
-{
- return inet_ntop(AF_INET, &addr4, buf->buf, sizeof(buf->buf));
-}
-static INLINE const char *ip6_to_string(struct ipaddr_str * const buf, const struct in6_addr * const addr6)
-{
- return inet_ntop(AF_INET6, addr6, buf->buf, sizeof(buf->buf));
-}
-static INLINE const char *sockaddr4_to_string(struct ipaddr_str * const buf, const struct sockaddr * const addr)
-{
- const struct sockaddr_in * const addr4 = (const struct sockaddr_in *)addr;
- return ip4_to_string(buf, addr4->sin_addr);
-}
-int programshutdown (void);
-
-#define NUM_THREADS 200
-struct thread_data {
- int thread_id;
- char interface1[11];
- char multicast_addr1[41];
- char interface2[11];
- char multicast_addr2[41];
- int ttl1;
- int ttl2;
- int port1;
- int port2;
-};
-
-struct thread_data thread_data_array[NUM_THREADS];
-/*******************************************************************
-*From net-tools lib/interface.c
- *
- *******************************************************************/
-int
-get_ipv6_address(char *ifname, struct sockaddr_in6 *saddr6, int scope_in)
-{
- char addr6[40], devname[IFNAMSIZE];
- char addr6p[8][5];
- int plen, scope, dad_status, if_idx;
- FILE *f;
- struct sockaddr_in6 tmp_sockaddr6;
-
- if ((f = fopen(_PATH_PROCNET_IFINET6, "r")) != NULL) {
- while (fscanf(f, "%4s%4s%4s%4s%4s%4s%4s%4s %02x %02x %02x %02x %20s\n",
- addr6p[0], addr6p[1], addr6p[2], addr6p[3],
- addr6p[4], addr6p[5], addr6p[6], addr6p[7],
- &if_idx, &plen, &scope, &dad_status, devname) != EOF) {
- if (!strcmp(devname, ifname)) {
- sprintf(addr6, "%s:%s:%s:%s:%s:%s:%s:%s",
- addr6p[0], addr6p[1], addr6p[2], addr6p[3],
- addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
- printf( "\t inet6 addr: %s\n", addr6);
- printf("\t Scope: %d\n", scope);
-
- if(scope == scope_in) {
- printf( "\tFound GLOBAL addr: %s:%s:%s:%s:%s:%s:%s:%s\n",
- addr6p[0], addr6p[1], addr6p[2], addr6p[3],
- addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
- inet_pton(AF_INET6,addr6,&tmp_sockaddr6);
- memcpy(&saddr6->sin6_addr, &tmp_sockaddr6, sizeof(struct in6_addr));
- fclose(f);
- return 1;
- }
- }
- }
-
- fclose(f);
- }
-
- return 0;
-}
-
-
-
-/*****************************************************/
-/* Threaded routine */
-/*****************************************************/
-void *Reflector(void *threadarg)
-{
- int ioctl_s;
- struct thread_data *my_data;
- my_data = (struct thread_data *)threadarg;
- struct in_addr multicastaddress_in; //IPv4 multicast address from command line
- struct in_addr multicastaddress_out;
- struct sockaddr_in6 tmp_saddr6;
- struct ifreq ifr;
- struct ipaddr_str buf;
- int mcdataport4; //IPv4 multicast port 1
- int mcdataport; //IPv4 multicast port 2
-
- /*define variables*/
-
- int mcdatarecvfd4; //multicast data receive socket side 1
- int mcdatarecvfd; //multicast data receive socket side 2
-
-
- int sendfd4; //local send socket IPv4 side 1
- int sendfd; //local send socket IPv4 side 2
-
- int ttl1; //time to live IPv4 side 1
- int ttl2; //time to live IPv4 side 2
- struct sockaddr_in mcdataaddr4; //reception IPv4 sockaddr
- struct sockaddr_in mcdataaddr; //reception IPv44 sockaddr
-
-
- char myhostnameipaddress4[20]; // IPv4 reflector's address string
- char myhostnameipaddress[20]; // IPv44 reflector's address string
- char addressstring4[20]; // IPv4 address string
- char addressstring[20]; // IPv44 address string
-
- struct sockaddr_in localsendaddr4; //IPv4 address of outgoing packets interface 1
- struct sockaddr_in localsendaddr; //IPv4 address of outgoing packets interface 2
-
- struct sockaddr_in sourceaddr4; //IPv4 address of incoming packets interface 1
- struct sockaddr_in sourceaddr; //IPv4 address of incoming packets interface 2
-
- struct ip_mreq mcdatareq4; //IPv4 join group structure
- struct ip_mreq mcdatareq; //IPv44 join group structure
-
-
- int mcdataaddrlen; //IPv4 multicast address length
- unsigned int sourceaddrlen; //IPv4 source address length
-
- char mcdatarecvbuf4[MSGBUF_SIZE]; //IPv4 multicast receive buffer
- char mcdatarecvbuf[MSGBUF_SIZE]; //IPv44 multicast receive buffer
-
-
-
- fd_set readfds; // file descriptors set
- int maxfds; // max number of file descriptors
- int nfds;
- int nr; // number of bytes read with recvfrom
- int ns; // number of bytes sent with sendto
- int chksrc; // asserts if source address is not the reflector's one
- int debugon=1;
- int n2;
- char inputbuf[32];
-
- /* IPv4 multicast address */
- if((inet_pton(AF_INET,my_data->multicast_addr1,&multicastaddress_in.s_addr))!=1) {
- printf("bad multicast IPv4 address format\n");
- exit (1);
- }
-
- //printf("multicastaddress side 1 v4 =%s\n",my_data->multicast_addr1);
- /* IPv4 multicast address */
- if((inet_pton(AF_INET,my_data->multicast_addr2,&multicastaddress_out.s_addr))!=1) {
- printf("bad multicast IPv4 address format\n");
- exit (1);
- }
-
- //printf("multicastaddress side 2 v4 =%s\n",my_data->multicast_addr2);
-
-
- /* IPv4 multicast ports */
-
- mcdataport4 = my_data->port1;
- mcdataport = my_data->port2;
-
-
- /* Time to live for IPv4 multicast */
- ttl1 = my_data->ttl1;
-
- /* Time to live for IPv4 multicast */
- ttl2 = my_data->ttl2;
-
- IP_VERSION=4;
-
- if (IP_VERSION==4 ) { //
- ioctl_s = socket(AF_INET, SOCK_DGRAM, 0);
-
- if (ioctl_s < 0) {
- syslog(LOG_ERR, "ioctl socket: %m");
- exit (0);
- }
-
- /* INTERFACE 1 */
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface1, IFNAMSIZE);
-
- /* Check interface address (IPv4) */
- if(ioctl(ioctl_s, SIOCGIFADDR, &ifr) < 0) {
- printf( "\tCould not get address of interface 1 - removing it\n");
- exit(0);
- }
-
- sockaddr4_to_string(&myhostnameipaddress4, &ifr.ifr_addr);
-
- /* INTERFACE 2 */
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface2, IFNAMSIZE);
-
- /* Check interface address (IPv4) */
- if(ioctl(ioctl_s, SIOCGIFADDR, &ifr) < 0) {
- printf( "\tCould not get address of interface 2 - removing it\n");
- exit(0);
- }
-
- sockaddr4_to_string(&myhostnameipaddress, &ifr.ifr_addr);
- } else {
- /* Global address mode */
- int ipv6_addrtype = 0; /* global */
- /* Get IPV6 GLOBAL interface address */
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface2, IFNAMSIZE);
-
- if(get_ipv6_address(ifr.ifr_name, &tmp_saddr6, ipv6_addrtype ) <= 0) {
- printf( "\tCould not find site-local IPv6 address for %s\n", ifr.ifr_name);
- }
-
- memset(&ifr, 0, sizeof(struct ifreq));
- strncpy(ifr.ifr_name, my_data->interface2, IFNAMSIZE);
-
- // printf("\n Adding interface : %s \n", my_data->interface2);
- /* Get IPV6 GLOBAL interface address */
- if(get_ipv6_address(ifr.ifr_name, &tmp_saddr6, ipv6_addrtype ) <= 0) {
- printf( "\tCould not find site-local IPv6 address for %s\n", ifr.ifr_name);
- }
- }
-
- /* Structures initialization */
-
- /*enter the address/port data into the mcdataaddr structure for IPv4*/
- bzero((char *) &mcdataaddr4, sizeof(mcdataaddr4));
- mcdataaddr4.sin_family=AF_INET;
- mcdataaddr4.sin_addr.s_addr = multicastaddress_in.s_addr;
- mcdataaddr4.sin_port = htons(mcdataport4);
-
- /*enter the address/port data into the mcdataaddr structure for IPv4*/
- bzero((char *) &mcdataaddr, sizeof(mcdataaddr));
- mcdataaddr.sin_family=AF_INET;
- mcdataaddr.sin_addr.s_addr = multicastaddress_out.s_addr;
- mcdataaddr.sin_port = htons(mcdataport);
-
-
- /*enter the address/port data into the localsendaddr structure for IPv4*/
- bzero((char *) &localsendaddr4, sizeof(localsendaddr4));
- localsendaddr4.sin_family=AF_INET;
- inet_pton(AF_INET, myhostnameipaddress4 , &localsendaddr4.sin_addr.s_addr);
- localsendaddr4.sin_port = htons(0);
- //LL
- // inet_ntop(AF_INET, &localsendaddr4.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- // printf("threaded function local sender addr side 1=%s \t",addressstring);
-
- /*enter the address/port data into the localsendaddr structure for IPv4*/
- bzero((char *) &localsendaddr, sizeof(localsendaddr));
- localsendaddr.sin_family=AF_INET;
- inet_pton(AF_INET, myhostnameipaddress , &localsendaddr.sin_addr.s_addr);
- localsendaddr.sin_port = htons(0);
- //LL
- // inet_ntop(AF_INET, &localsendaddr.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- // printf("threaded function local sender addr side 2=%s\n", addressstring);
-
- /*enter the address/port data into the mcdatareq structure for IPv4*/
- bzero((char *) &mcdatareq4, sizeof(mcdatareq4));
- // mcdatareq4.imr_interface.s_addr=htonl(INADDR_ANY); < force to add a multicast route
- inet_pton(AF_INET, myhostnameipaddress4 ,&mcdatareq4.imr_interface.s_addr );
- mcdatareq4.imr_multiaddr.s_addr=multicastaddress_in.s_addr;
- // inet_pton(AF_INET, myhostnameipaddress4 , &mcdatareq4.imr_interface.s_addr);
-
-
-
- /*enter the address/port data into the mcdatareq structure for IPv4*/
- bzero((char *) &mcdatareq, sizeof(mcdatareq));
- inet_pton(AF_INET, myhostnameipaddress ,&mcdatareq.imr_interface.s_addr );
- // mcdatareq.imr_interface.s_addr=htonl(INADDR_ANY);
- mcdatareq.imr_multiaddr.s_addr=multicastaddress_out.s_addr;
-
- /*get the sendfd socket linked to the first address of the current host */
- if ((sendfd4 = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open sendfd socket!");
- exit (1);
- }
-
- if (bind(sendfd4, (struct sockaddr *) &localsendaddr4, \
- sizeof(localsendaddr4)) < 0) {
-
- perror("can't bind localsendaddr v4 to socket!");
- exit(1);
- }
-
- /*get the sendfd socket linked to the first address of the current host*/
- if ((sendfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open sendfd socket!");
- exit (1);
- }
-
- if (bind(sendfd, (struct sockaddr *) &localsendaddr, \
- sizeof(localsendaddr)) < 0) {
- perror("can't bind localsendaddr v4 side 2 to socket!");
- exit(1);
- }
-
- if ((mcdatarecvfd4 = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open mcdatarecvfd4 socket!");
- exit(1);
- }
-
- /*allow multiple processes per host to read from IPv4 sockets side 2*/
- if (setsockopt(mcdatarecvfd4, SOL_SOCKET, SO_REUSEADDR, &mcdataaddr4, sizeof(mcdataaddr4)) < 0) {
- perror("SO_REUSEADDR setsockopt v4\n");
- }
-
- if (bind(mcdatarecvfd4, (struct sockaddr *) &mcdataaddr4, \
- sizeof(mcdataaddr4)) < 0) {
- inet_ntop(AF_INET, &mcdataaddr4.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- printf("with address of bind %s\n", addressstring);
- perror("can't bind mcdataaddr v4 to socket!");
- exit(1);
- }
-
-
- if (multicastaddress_out.s_addr!=multicastaddress_in.s_addr) {
- //multicast data receive socket side 2
- /*get a mcdatarecvfd socket, bind to address for IPv4*/
- if ((mcdatarecvfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("can't open mcdatarecvfd4 socket!");
- exit(1);
- }
-
- /*allow multiple processes per host to read from IPv4 sockets side 2*/
- if (setsockopt(mcdatarecvfd, SOL_SOCKET, SO_REUSEADDR, &mcdataaddr, sizeof(mcdataaddr)) < 0) {
- perror("SO_REUSEADDR setsockopt v4\n");
- }
-
- if (bind(mcdatarecvfd, (struct sockaddr *) &mcdataaddr, \
- sizeof(mcdataaddr)) < 0) {
- perror("can't bind mcdataaddr v4 side 2 to socket!");
- exit(1);
- }
-
- } else {
- mcdatarecvfd= mcdatarecvfd4;
- }
-
- /*set socket options to join multicast group in IPv4*/
- if (setsockopt(mcdatarecvfd4, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mcdatareq4,\
- sizeof(mcdatareq4)) < 0) {
- perror("can't set socket options to join multicast group data v4 side 1!");
- exit(1);
- }
-
-
- /*set socket options to join multicast group in IPv4*/
- if (setsockopt(mcdatarecvfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mcdatareq,\
- sizeof(mcdatareq)) < 0) {
- perror("can't set socket options to join multicast group data v4 side 2!");
- exit(1);
- }
-
- /*now set multicast socket TTL option for IPv4*/
- if (setsockopt(sendfd4, IPPROTO_IP, IP_MULTICAST_TTL, \
- &ttl1, sizeof(ttl1)) < 0)
- perror("can't set multicast ttl v4 socket option!");
-
- /*now set multicast socket TTL option for IPv4*/
- if (setsockopt(sendfd, IPPROTO_IP, IP_MULTICAST_TTL, \
- &ttl2, sizeof(ttl2)) < 0)
- perror("can't set multicast ttl v4 socket option!");
-
-
- /*define the sizes of the address structures*/
- mcdataaddrlen=sizeof(mcdataaddr4);
- sourceaddrlen=sizeof(sourceaddr4);
-
- /*start infinite while loop*/
- /*and check for activity on sockets*/
-
- /*set up the select sytem call parameters*/
- /*zero out the readfds and writefds lists, then add*/
- /*the file descriptors of interest*/
- while(1) {
-
- FD_ZERO(&readfds);
- FD_SET(mcdatarecvfd4, &readfds);
- FD_SET(mcdatarecvfd, &readfds);
-
- if (debugon >= 1) {
- FD_SET(0, &readfds);
- }
-
- maxfds = mcdatarecvfd4 + 5;
- /*check for activity*/
- nfds = select(maxfds, &readfds, NULL, NULL, NULL);
-
- /*if specified on the command line, check for input on stdin*/
- if (debugon >= 1) {
- if (FD_ISSET(0, &readfds)) {
- n2 = read(0,inputbuf, sizeof(inputbuf));
- inputbuf[n2>0? n2-1: 0] = '\0';
-
- if (!strcmp(inputbuf,"q")) {
- programshutdown();
- }
- }
-
- fflush(stdout);
- }
-
-
- /*1:receive from IPv4, send on IPv44 - data*/
- if (FD_ISSET(mcdatarecvfd4, &readfds)) {
- nr = recvfrom(mcdatarecvfd4, mcdatarecvbuf4, MSGBUF_SIZE, 0, (struct sockaddr *) \
- &sourceaddr4, &sourceaddrlen);
-
- if (debugon >= 2) {
- inet_ntop(AF_INET, &sourceaddr4.sin_addr.s_addr, addressstring4 , sizeof(addressstring4));
- printf("\nreading from mcdatarecvfd4, got data from %s\n", addressstring4);
- }
-
- if (sourceaddr4.sin_addr.s_addr == localsendaddr4.sin_addr.s_addr) {
- chksrc = 0;
-
- if (debugon >= 2)
- printf("don't retransmit multicastv4 sourced from gateway machine\n");
- } else {
- chksrc = 1;
-
- if (debugon >= 2)
- printf("retransmit to multicast address\n");
- }
-
- if (chksrc) {
- if (nr < 0)
- printf ("mcdatarecvfd4:recvfrom over multicast v4 address error!(1)\n");
-
- /*now send to IPv4*/
- if (multicastaddress_out.s_addr != INADDR_ANY) {
- if (debugon >= 2) {
- inet_ntop(AF_INET, &mcdataaddr.sin_addr.s_addr,addressstring4 ,sizeof(addressstring4));
- printf("sending to %s\n", addressstring4);
- }
-
- ns = sendto(sendfd, mcdatarecvbuf4, nr, 0, (struct sockaddr *)&mcdataaddr, \
- sizeof(mcdataaddr));
- } else {
- if (debugon >= 2) printf("not resending to ORIGINATOR! or array entry = 0\n");
- }
- }
- }
-
-
-
- /*2:receive from IPv4 side 2, send on IPv44 side 1 - data*/
- if (FD_ISSET(mcdatarecvfd, &readfds)) {
- nr = recvfrom(mcdatarecvfd, mcdatarecvbuf, MSGBUF_SIZE, 0, (struct sockaddr *) \
- &sourceaddr, &sourceaddrlen);
-
- if (debugon >= 2) {
- inet_ntop(AF_INET, &sourceaddr.sin_addr.s_addr, addressstring , sizeof(addressstring));
- printf("\nreading from mcdatarecvfd side 2, got data from %s\n", addressstring);
- }
-
- if (sourceaddr.sin_addr.s_addr == localsendaddr.sin_addr.s_addr) {
- chksrc = 0;
-
- if (debugon >= 2)
- printf("don't retransmit multicastv4 sourced from gateway machine\n");
- } else {
- chksrc = 1;
-
- if (debugon >= 2)
- printf("retransmit to multicast address side 1\n");
- }
-
- if (chksrc) {
- if (nr < 0)
- printf ("mcdatarecvfd:recvfrom over multicast v4 address error!(1)\n");
-
- /*now send to IPv4*/
- if (multicastaddress_in.s_addr != INADDR_ANY) {
- if (debugon >= 2) {
- inet_ntop(AF_INET, &mcdataaddr4.sin_addr.s_addr,addressstring ,sizeof(addressstring));
- printf("sending to %s\n", addressstring);
- }
-
- ns = sendto(sendfd4, mcdatarecvbuf, nr, 0, (struct sockaddr *)&mcdataaddr4, \
- sizeof(mcdataaddr4));
- } else {
- if (debugon >= 2) printf("not resending to ORIGINATOR! or array entry = 0\n");
- }
- }
- }
- } //end of while loop
-
-}
-
-
-/*****************************************************/
-int
-main (argc, argv)
-int argc;
-char **argv;
-{
- char interface1[11], interface2[11];
- int ttl1; //time to live side1
- int ttl2; //time to live side 2
- struct couple {
- char multicast_addr1[41]; /* address multicast for the group side 1 */
- char multicast_addr2[41]; /* address multicast for the group side 2 */
- };
- int nb_port_range;
- int nb_multicast_couple;
- int ip_version, ip_version2;
- int displayon=0;
- struct couple *multi_group;
-
- int i,j, k, rc,port;
- pthread_t threads[NUM_THREADS];
- struct port_range {
- int port_begin;
- int port_end;
- };
- struct port_range *prt_range;
-
- if (argc < 12) {
- fprintf (stderr, "Error in the syntax\n");
- exit(1);
- }
-
- strcpy(interface1,argv[1]);
- strcpy(interface2,argv[2]);
- ip_version= atoi(argv[3]);
- ip_version2=atoi(argv[4]);
- /* Time to live for IPv4 multicast */
- ttl1 = atoi(argv[5]);
-
-
- /* Time to live for IPv4 multicast */
- ttl2 = atoi(argv[6]);
- nb_multicast_couple=atoi(argv[7]);
-
- if (nb_multicast_couple !=0) {
- if ((multi_group=(struct couple *)malloc(nb_multicast_couple*sizeof(struct couple)))==NULL) {
- printf("Memory problem to allocate struct couple !\n") ;
- exit (1);
- }
-
- for (i=0; i <nb_multicast_couple; i++) {
-
- strcpy(multi_group[i].multicast_addr1,argv[8+2*i]);
- strcpy(multi_group[i].multicast_addr2,argv[8+2*i +1]);
- }
- } else {
- exit(0);
- }
-
- nb_port_range=atoi(argv[8 + nb_multicast_couple*2]);
-
- if (nb_port_range !=0) {
-
-
- if ((prt_range=(struct port_range *)malloc(nb_port_range*sizeof(struct port_range)))==NULL) {
- printf("Memory problem to allocate struct port !\n") ;
- exit (1);
- }
-
- for (i=0; i <nb_port_range; i++) {
-
- prt_range[i].port_begin= atoi(argv[8+1 + nb_multicast_couple*2+2*i]);
- prt_range[i].port_end = atoi(argv[8+1 + nb_multicast_couple*2+2*i +1]);
- }
- } else {
- exit(0);
- }
-
- k=0;
- printf( "Multicast state : for interface %s and interface %s for %d multicast group(s) on %d port range(s) \n", interface1, interface2, nb_multicast_couple, nb_port_range);
-
- for (i=0; i <nb_multicast_couple; i++) {
-
- for(j=0; j <nb_port_range; j++) {
-
- for (port= prt_range[j].port_begin; port <=prt_range[j].port_end; port++) {
- strcpy (thread_data_array[k].interface1, interface1);
- strcpy (thread_data_array[k].interface2, interface2);
- thread_data_array[k].ttl1=ttl1;
- thread_data_array[k].ttl2=ttl2;
- strcpy (thread_data_array[k].multicast_addr1, multi_group[i].multicast_addr1);
- strcpy (thread_data_array[k].multicast_addr2, multi_group[i].multicast_addr2);
- thread_data_array[k].thread_id=k;
- thread_data_array[k].port1=port;
- thread_data_array[k].port2=port;
-
- if (displayon >= 1) printf("Creating thread %d for group %d for port %d\n", k,i ,port);
-
- rc=pthread_create(&threads[k], NULL, Reflector, (void *)&thread_data_array[k]);
-
- if (rc) {
- printf("Error; return code from pthreade_create() is %d\n", rc);
- exit(-1);
- }
-
- k=k+1;
-
- if (k> NUM_THREADS) {
- printf("Number of created threads over the fixed limited!" );
- exit(-1);
- }
- }
- }
- }
-
- pthread_exit(NULL);
-}
-
-int programshutdown ()
-{
- exit (1);
-}
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector_launch.pl b/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector_launch.pl
deleted file mode 100644
index 8a5a96802337e6afbde2d16bfc781eb1ff5516a2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector_launch.pl
+++ /dev/null
@@ -1,75 +0,0 @@
-#!/usr/bin/perl -w
-use Switch;
-
-$dir = $ARGV[0];
-$file = $ARGV[1];
-
-$nb_groupes = `grep groupes $ARGV[0]|wc -l|sed \'s/ //g\'`;
-$nb_plages = `grep port $ARGV[0]|wc -l|sed \'s/ //g\'`;
-chomp($nb_plages);
-chomp($nb_groupes);
-
-#les structures dans lesquelles on stocke les données
-@groupes=();
-@ports=();
-@int_1=();
-@int_2=();
-@ipv_1=();
-@ipv_2=();
-@ttl_1=();
-@ttl_2=();
-
-#on compte le nombre de lignes, pour signaler l'erreur
-$num_ligne = 0;
-
-
-open(fFile, "< $file") or die "cannot open file $file";
-while($line = <fFile>){
- $num_ligne++;
- #on ignore les lignes commentées ou vides
- if ((substr ($line,0,1) ne "#") && ($line =~ /=/)) {
- @ligne=split("=", $line);
- #si l'argument est vide, alors le programme sort avec une erreur
- chomp($ligne[1]);
- if(!length($ligne[1])){
- printf "Erreur dans le fichier de conf à la ligne $num_ligne.\n";
- exit;
- }
-
- #on met les données dans les structures adéquates
- switch ($ligne[0]){
- case "int_1" {push(@int_1,$ligne[1])}
- case "int_2" {push(@int_2,$ligne[1])}
- case "ipv_1" {push(@ipv_1,$ligne[1])}
- case "ipv_2" {push(@ipv_2,$ligne[1])}
- case "ttl_1" {push(@ttl_1,$ligne[1])}
- case "ttl_2" {push(@ttl_2,$ligne[1])}
- case "groupes" {push(@groupes,$ligne[1])}
- case "ports" {push(@ports,$ligne[1])}
- }
-
- }
-
-}
-close(fFile);
-
-#On construit la commande et on l'affiche
-$commande = "$dir/reflector $int_1[0] $int_2[0] $ipv_1[0] $ipv_2[0] $ttl_1[0] $ttl_2[0]";
-
-#on rajoute le nb de groupes et les groupes
-$commande = $commande." ".@groupes;
-foreach $groupe (@groupes){
- @couple = split (",", $groupe);
- $commande = $commande." $couple[0] $couple[1]";
-}
-
-#on rajoute le nb de ports et les ports
-$commande = $commande." ".@ports;
-foreach $port (@ports){
- @couple = split (",", $port);
- $commande = $commande." $couple[0] $couple[1]";
-}
-
-$commande = $commande."\n";
-
-system($commande);
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_conf_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch1_conf_nas_eads.sh
deleted file mode 100644
index 53ec32fbc898a8c50f4207016732fd1631ef310d..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_conf_nas_eads.sh
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/bash
-
-source params.sh
-echo Clusterhead address is $CH_ADDR
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH
-
-#CH1<-> MR1 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
-#CH1<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
-
-#CH1<-> MR1 multicast (rajout THC)
-echo EADS Multicast for CH1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.15 -r 12
-#CH1<-> MR2 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
-#CH1<-> MR2 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
-#CH1<-> MR2 (MPLS PMIP signaling bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 20
-
-#CH1<-> MR2 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.15 -r 20
-
-#CH1 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
-
-echo Configuring interfaces on CH
-#Multicast
-#sudo ifconfig eth0 192.168.8.2
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add $CH1_IN_ADDR/24 dev nasmesh0
-sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH1_IN6_ADDR
-echo No MPLS debug
-sudo sh -c 'echo "0" >/sys/mpls/debug'
-sleep 1
-#rajout THC pour MULTICAST
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch2 &
-
-
-
-sleep 1
-echo Launching AS simulator
-export OPENAIR2_DIR
-xterm -T CH1 -hold -e sh start_openair2_ch1.sh &
-sleep 1
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas.sh
deleted file mode 100644
index d3c4ca531d89d883132e2631b1bfa5c344eed3d8..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/bash
-#Phil, 25 july 08
-#Cluster Head (1) – with NAS_MPLS_PMIP working
-
-source params.sh
-./ch1_conf_nas_eads.sh
-#MN1->MN2
-./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads.sh
deleted file mode 100755
index 5b49a6317f180a716f0c56809ef66fb9727bb11f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-#Phil, 25 july 08
-#Cluster Head (1) – with NAS_MPLS_PMIP working
-
-source params.sh
-./ch1_conf_nas_eads.sh
-#MN1->MN2
-./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sudo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads_testdoublePMIP.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads_testdoublePMIP.sh
deleted file mode 100755
index 2566631dce100be2a975163bc573f7a181661e9c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads_testdoublePMIP.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-#Phil, 25 july 08
-#Cluster Head (1) – with NAS_MPLS_PMIP working
-
-source params.sh
-./ch1_conf_nas_eads.sh
-#MN1->MN2
-./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
-
-echo 'CH2->MR2->CH1'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
-
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
-
-echo $OPENAIR3_HOME/PMIP6D/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR -P 7778
-sudo xterm -hold -e $OPENAIR3_HOME/PMIP6D/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR -P 7778 &
-sleep 1
-echo $OPENAIR3_HOME/PMIP6D/pmip6d -m -s -L $CH1_IN6_ADDR -N $CH1_EG6_ADDR -E $CH1_IN6_ADDR
-sudo $OPENAIR3_HOME/PMIP6D/pmip6d -m -s -L $CH1_IN6_ADDR -N $CH1_EG6_ADDR -E $CH1_IN6_ADDR
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch2_conf_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch2_conf_nas_eads.sh
deleted file mode 100644
index 33e1dd85d2d2ec89d7613934da1ddf14ed9c0a29..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch2_conf_nas_eads.sh
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/bash
-
-source params.sh
-echo Clusterhead address is $CH2_IN6_ADDR
-
-# Installing NASMESH driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
-echo Classification rules for CH2
-
-#CH2<-> MR2 IP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
-#CH<-> MR1 MPLS user-plane bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
-#CH2<-> MR2 MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 20
-
-#CH2<-> MR2 Imulticast
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.10 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.11 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.12 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.13 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.14 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.15 -r 20
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.15 -r 20
-
-#CH2<-> MR3 (IP Signaling)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
-#CH2<-> MR3 (MPLS user-plane bearer)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
-
-#CH2 Broadcast (transmission of Router ADV)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
-
-#CH2<-> MR3 multicast EADS (rajout THC)
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.10 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.11 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.12 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.13 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.14 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.15 -r 28
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.15 -r 28
-echo Configuring interfaces on CH2
-##Multicast
-#ifconfig eth0 192.168.8.4
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-
-# Bring up openair NASMESH device and set IPv6 address
-sudo ifconfig nasmesh0 up
-sudo ip addr add $CH2_IN_ADDR/24 dev nasmesh0
-sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
-
-echo nasmesh0 is $CH2_IN6_ADDR
-echo No MPLS debug
-sudo sh -c 'echo "0" >/sys/mpls/debug'
-sleep 1
-#rajout THC pour MULTICAST
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch2 &
-
-
-
-sleep 1
-echo Launching AS simulator
-export OPENAIR2_DIR
-xterm -T CH2 -hold -e sh start_openair2_ch2.sh &
-sleep 1
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas.sh
deleted file mode 100644
index ffc9e503ec23a3aff15d831b1c9213a0d6f3c24f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-#CH2_NAS.SH
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas_eads.sh
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-
-echo 'CH1->MR2->CH2'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
-
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
-
-
-
-echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-sudo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas_eads.sh
deleted file mode 100755
index 42bd35a6e5b50adb846756ef562999fce609c2e4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas_eads.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-#CH2_NAS.SH
-#Cluster Head (2)– with NAS_MPLS_PMIP working
-#Phil, 25 july 08
-
-source params.sh
-./ch2_conf_nas_eads.sh
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
-#MN2->MN1
-./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
-
-echo 'CH1->MR2->CH2'
-mpls labelspace set dev nasmesh0 labelspace 0
-mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
-
-echo 'CH1->MR2->CH2'
-var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
-
-echo $OPENAIR3_HOME/PMIP6D/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-sudo $OPENAIR3_HOME/PMIP6D/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
-sleep 2
-./del_mpls.sh
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/del_mpls.sh b/openair3/EXAMPLES/MULTICAST_2CHS/del_mpls.sh
deleted file mode 100755
index 1daef35dd8b479d35b94e0a571e4ff32f7def5c6..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/del_mpls.sh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/bash
-#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
-#June 2006
-#Released under GPL
-
-#Added by phil, Huu Nghia, 8 July 08
-
-echo Deleting all mpls - xc settings
-xc_output="`mpls xc show | cut -c 9-75`"
-
-number_of_lines=`echo $xc_output|wc -l`
-
-for i in `seq 1 $number_of_lines`
-do
- xc_output_line="`echo $xc_output| head -$i | tail -1`"
- echo Deleting: mpls xc del $xc_output_line
- mpls xc del $xc_output
-
- #increment i
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ip route settings
-nr_of_lines=` ip route show |grep mpls |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`ip route show |grep mpls |head -1`
- echo Deleting: ip route del $output
- ip route del $output
- i=`expr $i+1`
- done
-
-
-var1=`ip route show table 1`
- if [ ! -z "$var1" ]; then
- ip route del table 1
- #var1=`ip route show table 1`
- #ip route del $var1 table 1
- ip route flush table 1
- echo "clearing ip route table 1"
- fi
-
-var1=`ip route show table 2`
- if [ ! -z "$var1" ]; then
- ip route del table 2
-# var1=`ip route show table 2`
- # ip route del $var1 table 2
- ip route flush table 2
- echo "clearing ip route table 2"
- fi
-
-#echo Flushing iptables chains
-#iptables -F
-#echo Flushing iptables -t nat
-#iptables -t nat -F
-#echo Flushing iptables -t mangle
-#iptables -t mangle -F
-
-echo Deleting all mpls - nhlfe settings
-nr_of_lines=` mpls nhlfe show |grep key |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
- echo Deleting: mpls nhlfe del key $output
- mpls nhlfe del key $output
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - labelspace settings
-nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
- echo Deleting: mpls labelspace set $output -1
- mpls labelspace set $output -1
- i=`expr $i+1`
-done
-
-echo Deleting all mpls - ilm settings
-nr_of_lines=`mpls ilm show |grep ILM |wc -l`
-for i in `seq 1 $nr_of_lines `
-do
- output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
- echo Deleting: mpls ilm del $output
- mpls ilm del $output
- i=`expr $i+1`
-done
-
-var1=`tc qdisc show |grep eth0 |grep htb`
-if [ ! -z "$var1" ]; then
- tc qdisc del dev eth0 root
- echo "tc clear eth0"
-fi
-
-var2=`tc qdisc show |grep eth3 |grep htb`
-if [ ! -z "$var2" ]; then
- tc qdisc del dev eth3 root
- echo "tc clear eth3"
-fi
-
-var3=`tc qdisc show |grep eth1 |grep htb`
-if [ ! -z "$var3" ]; then
- tc qdisc del dev eth1 root
- echo "tc clear eth1"
- fi
-
- var4=`tc qdisc show |grep eth2 |grep htb`
- if [ ! -z "$var4" ]; then
- tc qdisc del dev eth2 root
- echo "tc clear eth2"
- fi
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mn1_conf.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mn1_conf.sh
deleted file mode 100644
index 3c3a824d06dd6ed1c419f4580b94c0e64ed00eaa..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mn1_conf.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/bash
-#Huu-Nghia, Philippe, Lamia 28 june 2008
-
-#echo Deleting MN1 autoconfigured addresse
-#$OPENAIR3_SCRIPTS_PATH/mn1_del.sh
-
-#ip -6 route add 2001:660:5502::25/128 via 2001:660:5502::10 dev eth0
-
-
-ip addr add $MN1_IN_ADDR/32 dev eth0
-
-ip -6 addr del 2001:660:5502::15/64 dev eth0
-ip -6 addr add 2001:660:5502::15/64 dev eth0
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mn2_conf.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mn2_conf.sh
deleted file mode 100644
index 1c0311b13e0a4ea446a967880d1a61767f414724..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mn2_conf.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/bash
-#Huu-Nghia, Philippe, Lamia 28 june 2008
-
-#echo Deleting MN1 autoconfigured addresse
-#$OPENAIR3_SCRIPTS_PATH/mn1_del.sh
-
-#ip -6 route add 2001:660:5502::25/128 via 2001:660:5502::10 dev eth0
-
-
-ip addr add $MN2_IN_ADDR/32 dev eth0
-
-ip -6 addr del 2001:660:5502::25/64 dev eth0
-ip -6 addr add 2001:660:5502::25/64 dev eth0
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mpls_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mpls_nas.sh
deleted file mode 100755
index eb6bb742af16a35504835b60c1ce534bd1347cf3..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-
-#Script by Lamia Romdhani
-#June 2008
-
-echo Setting MPLS
-sudo modprobe mpls6
-
-echo Number of params = $#
-if [ $# -eq 3 ]; then
- LABEL_IN=$1
- IP_NEXT_HOP=$2
- LABEL_OUT=$3
-
- echo "IP Next Hop is $IP_NEXT_HOP"
-
- echo 'Starting mpls'
- sudo mpls labelspace set dev nasmesh0 labelspace 0
- sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
-var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
- sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
-else
- echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
-fi
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_conf_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr1_conf_nas_eads.sh
deleted file mode 100644
index 7ef32cce0de8ba1ae9a3a81918fe7be5728dcc06..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_conf_nas_eads.sh
+++ /dev/null
@@ -1,56 +0,0 @@
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-
-#Multicast
-#ifconfig eth1 192.168.8.1
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-echo Configuring interfaces on mr1
-#sudo ifconfig nasmesh0 up
-#sudo ifconfig nasmesh0 up
-sudo ip link set nasmesh0 up
-sudo ip addr add $MR1_IN_ADDR/32 dev nasmesh0
-sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
-sudo ip addr add $MR1_EG_ADDR/32 dev $ETH_MR1
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev $ETH_MR1
-
-
-
-echo Classification rules for MR1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
-
-#MR1<-> CH1 multicast (rajout THC)
-echo EADS Multicast for MR1
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR1_IN_ADDR -t 226.30.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH1_IN_ADDR -t 226.30.10.15 -r 4
-
-
-
-
-sleep 1
-#rajout THC pour MULTICAST
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
-
-sleep 1
-
-echo Launching AS simulator
-xterm -T MR1 -hold -e sh start_openair2_mr1.sh &
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_mpls_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr1_mpls_nas.sh
deleted file mode 100755
index 054da2ea18938ac04357c0c92de7c8151950967a..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_mpls_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-sudo modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-sudo sh -c 'echo 0 >/sys/mpls/debug'
-
-echo 'MN1->MN2'
-var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
-echo "Creating routes"
-sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
-
-echo Setting MPLS for mr1
-echo 'MN2->MN1'
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
-
-sudo ip -6 route add $MN1_IN6_ADDR/128 dev $ETH_MR1
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas.sh
deleted file mode 100644
index 6badaec2afae8920e8d91109565cbbeb593248b2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./del_mpls.sh
-./mr1_conf_nas_eads.sh
-./mr1_mpls_nas.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig $ETH_MR1 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev $ETH_MR1
-sudo $OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR
-./del_mpls.sh
-
-
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas_eads.sh
deleted file mode 100755
index 6badaec2afae8920e8d91109565cbbeb593248b2..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas_eads.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./del_mpls.sh
-./mr1_conf_nas_eads.sh
-./mr1_mpls_nas.sh
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig $ETH_MR1 promisc
-sudo ip -6 addr add $MR1_EG6_ADDR/64 dev $ETH_MR1
-sudo $OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR
-./del_mpls.sh
-
-
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr2_conf_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr2_conf_nas_eads.sh
deleted file mode 100644
index f0ab55966eee933336af7c3c8f73ed92f1b0c486..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr2_conf_nas_eads.sh
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/bash
-
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
-echo Configuring interfaces on mr2
-
-
-sudo ifconfig nasmesh0 up
-sudo ifconfig nasmesh0 $MR2_IN_ADDR
-sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
-sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
-
-echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
-echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
-echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 4
-
-#MR2<-> CH1 multicast (rajout THC)
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.10 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.11 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.12 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.13 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.14 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR2_IN_ADDR -t 226.40.10.15 -r 4
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH1_IN_ADDR -t 226.40.10.15 -r 4
-
-
-
-echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
-echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 12
-
-#MR2<-> CH2 multicast
-echo EADS Multicast for MR2
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR2_IN_ADDR -t 226.50.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH2_IN_ADDR -t 226.50.10.15 -r 12
-
-
-sleep 1
-#rajout THC pour MULTICAST
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2 &
-
-
-sleep 1
-echo Launching AS simulator
-xterm -T MR2 -hold -e sh start_openair2_mr2.sh &
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas.sh
deleted file mode 100644
index e4f793b09124cc0963be6284e74c874d6dd3a60f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#sudo sh -c 'echo 0 >/sys/mpls/debug
-./del_mpls.sh
-./mr2_conf_nas_eads.sh
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
-#MN2->MN1
-./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
-
-#CH1->CH2
-./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
-#CH2->CH1
-./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
-
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas_eads.sh
deleted file mode 100755
index e4f793b09124cc0963be6284e74c874d6dd3a60f..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas_eads.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#sudo sh -c 'echo 0 >/sys/mpls/debug
-./del_mpls.sh
-./mr2_conf_nas_eads.sh
-
-#MN1->MN2
-./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
-#MN2->MN1
-./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
-
-#CH1->CH2
-./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
-#CH2->CH1
-./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
-
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_conf_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr3_conf_nas_eads.sh
deleted file mode 100644
index 2d3db66e62762a40b92fb723a8fb46323b8dc85c..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_conf_nas_eads.sh
+++ /dev/null
@@ -1,51 +0,0 @@
-source params.sh
-export OPENAIR2_DIR
-#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
-echo Installing NASMESH Driver
-sudo rmmod -f nasmesh
-sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
-echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
-echo Configuring interfaces on mr3
-
-#Multicast
-#ifconfig eth1 192.168.8.5
-sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
-#sudo ifconfig nasmesh0 up
-#sudo ifconfig nasmesh0 $MR3_IN_ADDR
-sudo ip link set nasmesh0 up
-sudo ip addr add $MR3_IN_ADDR/32 dev nasmesh0
-sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
-sudo ip addr add $MR3_EG_ADDR/32 dev $ETH_MR3
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev $ETH_MR3
-
-
-echo Classification rules for MR3 - Default DTCH UL for L3 signaling
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
-echo Classification rules for MR3 - MPLS User-plane Bearer
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
-
-#MR3<-> CH2 multicast (rajout THC)
-echo EADS Multicast for MR3
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.10 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.11 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.12 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.13 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.14 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s MR3_IN_ADDR -t 226.30.10.15 -r 12
-$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s CH2_IN_ADDR -t 226.30.10.15 -r 12
-
-#rajout THC pour MULTICAST
-echo Multicast state launched with config_ch2
-xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
-
-sleep 1
-
-
-echo Launching AS simulator
-sudo xterm -T MR3 -hold -e sh start_openair2_mr3.sh &
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_mpls_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr3_mpls_nas.sh
deleted file mode 100755
index e5c6271f69982bc632d89cf7bfa265098a52ad26..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_mpls_nas.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-# Author: Lamia Romdhani
-#June 2008
-
-source params.sh
-sudo modprobe mpls6
-
-echo Starting routing ...
-echo No MPLS debug
-sudo sh -c 'echo 0 >/sys/mpls/debug'
-
-echo Setting MPLS for mr3
-
-
-echo 'MN1->MN2'
-#pop label 4000 and do Ip lookup.
-sudo mpls labelspace set dev nasmesh0 labelspace 0
-sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
-
-
-echo 'MN2->MN1'
-# add label 3000 and forward the packets to mr2, for destination MN1
-var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
-
-echo "Creating routes"
-sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
-sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
-sudo ip -6 route add $MN3_IN6_ADDR/128 dev $ETH_MR3
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas.sh
deleted file mode 100644
index 0a227dbf053e66f2041d1ee1693017b075b442f0..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./del_mpls.sh
-./mr3_conf_nas_eads.sh
-./mr3_mpls_nas.sh
-
-
-#/etc/init.d/radvd status
-#/etc/init.d/radvd start
-#radvdump
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig $ETH_MR3 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev $ETH_MR3
-sudo $OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR
-./del_mpls.sh
-
-
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas_eads.sh b/openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas_eads.sh
deleted file mode 100755
index 0a227dbf053e66f2041d1ee1693017b075b442f0..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas_eads.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-source params.sh
-sudo sysctl -w net.ipv6.conf.all.forwarding=1
-#./del_mpls.sh
-./mr3_conf_nas_eads.sh
-./mr3_mpls_nas.sh
-
-
-#/etc/init.d/radvd status
-#/etc/init.d/radvd start
-#radvdump
-
-sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
-sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
-
-sudo ifconfig $ETH_MR3 promisc
-sudo ip -6 addr add $MR3_EG6_ADDR/64 dev $ETH_MR3
-sudo $OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR
-./del_mpls.sh
-
-
-
-
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/params.sh b/openair3/EXAMPLES/MULTICAST_2CHS/params.sh
deleted file mode 100644
index 1484cabecce336c0c12405f6a4902a11ad9164b4..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/params.sh
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/bash
-
-MR1_IN_ADDR=10.0.1.3
-MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
-MR1_EG_ADDR=192.168.9.1
-MR1_EG6_ADDR=2001:660:5502::100
-# Flow CH1->MR1
-MR1_LABEL_IN=1001
-# Flow MR1->CH1
-MR1_LABEL_OUT=1000
-ETH_MR1=eth2
-
-MR2_IN_ADDR=10.0.1.4
-MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
-MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
-MR2_EG6_ADDR=2001:660:5502::300
-# Flow CH1->MR2
-MR2_CH1_LABEL_IN=2000
-# Flow MR2->CH1
-MR2_CH1_LABEL_OUT=2001
-# Flow CH2->MR2
-MR2_CH2_LABEL_IN=3000
-# Flow MR2->CH2
-MR2_CH2_LABEL_OUT=3001
-
-MR3_IN_ADDR=10.0.1.5
-MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
-MR3_EG_ADDR=192.168.10.1
-MR3_EG6_ADDR=2001:660:5502::200
-# Flow CH2->MR3
-MR3_LABEL_IN=4000
-# Flow MR3->CH2
-MR3_LABEL_OUT=4001
-ETH_MR3=eth3
-
-CH1_IN_ADDR=10.0.1.1
-CH2_IN_ADDR=10.0.1.2
-
-CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
-CH1_EG6_ADDR=2001:660:5502::400
-CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
-
-## Communication between the CHs
-CH1_MR2_CH2_LABEL_IN=8001
-CH1_MR2_CH2_LABEL_OUT=8000
-CH2_MR2_CH1_LABEL_IN=9001
-CH2_MR2_CH1_LABEL_OUT=9000
-
-#MN1_IN6_ADDR=2001:660:5502::20
-#MN2_IN6_ADDR=2001:660:5502::25
-MN1_IN6_ADDR=2001:660:5502::110
-MN1_IN_ADDR=192.168.9.2
-
-MN2_IN6_ADDR=2001:660:5502::210
-MN3_IN6_ADDR=2001:660:5502::220
-MN2_IN_ADDR=192.168.10.2
-
-# Put the right OPENAIR3 path here
-OPENAIR3_HOME=/homes/foubert/Openair/openair3
-OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/PMIP6D
-#OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
-#REFLECTOR_DIR=$OPENAIR3_HOME/EXAMPLES/MULTICAST_2CHS/REFLECTOR
-
-# Put the right OPENAIR2 path here
-#OPENAIR2_DIR=~/openair2_r234/openair2/
-#OPENAIR2_DIR=~/CHORIST_2CHs_EMULATION_MULTICAST_20090119/openair2
-
-# Multicast Reflector
-#REFLECTOR_DIR=~/CHORIST_2CHs_EMULATION_MULTICAST_20090119/openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn1.sh b/openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn1.sh
deleted file mode 100755
index 74259821f306aeb9fbbc5f25ab854b1870274933..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn1.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-source params.sh
-
-
-ip -6 route add 2001:660::/4 dev eth0
-
-modprobe ip6_tunnel
-ip -6 tunnel add tunMN1toMN2 mode ipip6 remote $MN2_IN6_ADDR local $MN1_IN6_ADDR dev eth0
-ip link set dev tunMN1toMN2 up
-sudo ip -6 addr add 4001:660:5502::20 dev tunMN1toMN2
-
-echo "redirection of the ipv4 traffic to the tunMN1toMN2 tunnel"
-ip route add 192.168.1.0/24 dev tunMN1toMN2
-echo "1" >/proc/sys/net/ipv6/conf/all/forwarding
-echo "1" >/proc/sys/net/ipv4/ip_forward
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn2.sh b/openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn2.sh
deleted file mode 100755
index 9debb93b43bfa972fb07d6bef9a5bded86a22470..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn2.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-source params.sh
-ip -6 route add 2001:660::/4 dev eth0
-
-modprobe ip6_tunnel
-/opt/iproute2-2.6.26/ip/ip -6 tunnel add tunMN2toMN1 mode ipip6 remote $MN1_IN6_ADDR local $MN2_IN6_ADDR dev eth0
-
-/opt/iproute2-2.6.26/ip/ip link set dev tunMN2toMN1 up
-sudo ip -6 addr add 4001:660:5502::25 dev tunMN2toMN1
-
-echo "redirection of the ipv4 traffic to our tunnel"
-ip route add 192.168.3.0/24 dev tunMN2toMN1
-
-echo "1" >/proc/sys/net/ipv6/conf/all/forwarding
-echo "1" >/proc/sys/net/ipv4/ip_forward
-
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch1.sh b/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch1.sh
deleted file mode 100644
index 9aba3d7dfb0d1e0266b1d0628258529f721983aa..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch1.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch2.sh b/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch2.sh
deleted file mode 100644
index 353e556705608bb47c95c4793f3bc125cb8624f7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch2.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m1 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr1.sh b/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr1.sh
deleted file mode 100755
index 3ecd3c072e3f6b2c8454fbd3ecf4bcfd8a75d975..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr1.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m2 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr2.sh b/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr2.sh
deleted file mode 100755
index 6c7d44c03b031e26b4399a33447ab1a2a4cd63c5..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr2.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-source params.sh
-
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m3 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
diff --git a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr3.sh b/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr3.sh
deleted file mode 100755
index 8ee1fd4f29e237f241dbee9aac88e69c8d26c1a7..0000000000000000000000000000000000000000
--- a/openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr3.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-source params.sh
-cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
-./mac_sim -m4 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top