diff --git a/openair-cn/SCRIPTS/install_asn1c_0.9.24.modified.bash b/openair-cn/SCRIPTS/install_asn1c_0.9.24.modified.bash
deleted file mode 100755
index 3821d656c9e3cfca005788c51bcd699d6f9f150f..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/install_asn1c_0.9.24.modified.bash
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# Tested on ubuntu 12.04 with updates 07 november 2013
-
-$1 rm -Rf /usr/local/src/asn1c-r1516
-$1 svn co https://github.com/vlm/asn1c/trunk  /usr/local/src/asn1c-r1516 -r 1516  > /tmp/install_log.txt
-cd /usr/local/src/asn1c-r1516
-$1 patch -p0 < $OPENAIRCN_DIR/S1AP/MESSAGES/ASN1/asn1cpatch.p0  > /tmp/install_log.txt
-$1 ./configure  > /tmp/install_log.txt
-$1 make  > /tmp/install_log.txt
-$1 make install  > /tmp/install_log.txt
\ No newline at end of file
diff --git a/openair-cn/SCRIPTS/install_openvswitch1.9.0.bash b/openair-cn/SCRIPTS/install_openvswitch1.9.0.bash
deleted file mode 100755
index 4704c2342fdb9323def1afa9c70afcee6fba409a..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/install_openvswitch1.9.0.bash
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# Tested on ubuntu 12.04 with updates on 05 april 2013, 07 november 2013, 20 january 2014
-
-# Make sure only root can run our script
-if [[ $EUID -ne 0 ]]; then
-   echo "This script must be run as root" 1>&2
-   exit 1
-fi
-
-apt-get install iproute pkg-config python-twisted-conch python-anyjson \
-python-pyside python3-pyside python-zope python-qt4 libssl-dev uml-utilities    \
-linux-headers-`uname -r` vlan -y
-
-rmmod bridge
-cd /usr/local/src/
-if [ ! -f /usr/local/src/openvswitch-1.9.0.tar.gz ]; then
-    wget http://openvswitch.org/releases/openvswitch-1.9.0.tar.gz
-fi
-tar -xzf openvswitch-1.9.0.tar.gz
-cd openvswitch-1.9.0
-./boot.sh
-./configure --with-linux=/lib/modules/`uname -r`/build  --disable-ssl
-make
-make install
-make modules_install
-
-if [ -f /lib/modules/`uname -r`/kernel/net/openvswitch/openvswitch.ko ] ; then
-    insmod /lib/modules/`uname -r`/kernel/net/openvswitch/openvswitch.ko
-else
-    if  [ -f /lib/modules//`uname -r`/extra/openvswitch.ko ] ; then
-        insmod /lib/modules//`uname -r`/extra/openvswitch.ko
-	else
-       echo_error "Could not find openvswitch.ko, exiting"
-	   exit 1
-    fi
-fi
-# Initialize the configuration database using ovsdb-tool, e.g.:
-
-mkdir -p /usr/local/etc/openvswitch
-ovsdb-tool create /usr/local/etc/openvswitch/conf.db vswitchd/vswitch.ovsschema
-
-#=======
-# Startup
-#=======
-# Before starting ovs-vswitchd itself, you need to start its
-# configuration database, ovsdb-server.  Each machine on which Open
-# vSwitch is installed should run its own copy of ovsdb-server.
-# Configure it to use the database you created during step 7 of
-# installation, above, to listen on a Unix domain socket, to connect to
-# any managers specified in the database itself, and to use the SSL
-# configuration in the database:
-
-ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,manager_options --pidfile --detach
-
-# Then initialize the database using ovs-vsctl.  This is only
-# necessary the first time after you create the database with
-# ovsdb-tool (but running it at any time is harmless):
-
-ovs-vsctl --no-wait init
-
-# Then start the main Open vSwitch daemon, telling it to
-# connect to the same Unix domain socket:
-
-ovs-vswitchd --pidfile --detach
-
diff --git a/openair-cn/SCRIPTS/start_enb.bash b/openair-cn/SCRIPTS/start_enb.bash
deleted file mode 100755
index 7b57becf17d8add67afa881b6a96c2cf819374a4..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_enb.bash
+++ /dev/null
@@ -1,326 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# start MME+S/P-GW with openvswitch setting
-
-
-#        +-----------+          +------+              +-----------+
-#        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    |
-#        |           |cpenb0+------------------+cpmme0|           |
-#        |           +------+   |bridge|       +------+           |
-#        |           |upenb0+-------+  |              |           |
-#        +-----------+------+   |   |  |              +-----------+
-#                               +---|--+                    |
-#                                   |                 +-----------+
-#                                   |                 |  S+P-GW   |
-#                                   |  VLAN2   +------+           +-------+
-#                                   +----------+upsgw0|           |eth0   +---Internet access
-#                                              +------+           +-------+
-#                                                     |           |
-#                                                     +-----------+
-#
-
-
-BRIDGE="vswitch"
-
-###########################################################
-IPTABLES=/sbin/iptables
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-declare -x OPENAIR_DIR=""
-declare -x OPENAIR1_DIR=""
-declare -x OPENAIR2_DIR=""
-declare -x OPENAIR3_DIR=""
-declare -x OPENAIR_TARGETS=""
-###########################################################
-cidr2mask() {
-  local i mask=""
-  local full_octets=$(($1/8))
-  local partial_octet=$(($1%8))
-
-  for ((i=0;i<4;i+=1)); do
-    if [ $i -lt $full_octets ]; then
-      mask+=255
-    elif [ $i -eq $full_octets ]; then
-      mask+=$((256 - 2**(8-$partial_octet)))
-    else
-      mask+=0
-    fi
-    test $i -lt 3 && mask+=.
-  done
-
-  echo $mask
-}
-
-
-black='\E[30m'
-red='\E[31m'
-green='\E[32m'
-yellow='\E[33m'
-blue='\E[34m'
-magenta='\E[35m'
-cyan='\E[36m'
-white='\E[37m'
-
-ROOT_UID=0
-E_NOTROOT=67
-
-trim ()
-{
-    echo "$1" | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'
-}
-
-
-cecho()   # Color-echo
-# arg1 = message
-# arg2 = color
-{
-    local default_msg="No Message."
-    message=${1:-$default_msg}
-    color=${2:-$black}
-    echo -e "$color"
-    echo -n "$message"
-    tput sgr0
-    echo
-    return
-}
-
-echo_error() {
-    local my_string=""
-    until [ -z "$1" ]
-    do
-        my_string="$my_string$1"
-        shift
-        done
-        cecho "$my_string" $red
-}
-
-echo_warning() {
-    local my_string=""
-    until [ -z "$1" ]
-    do
-        my_string="$my_string$1"
-        shift
-    done
-    cecho "$my_string" $yellow
-}
-
-echo_success() {
-    local my_string=""
-    until [ -z "$1" ]
-    do
-        my_string="$my_string$1"
-        shift
-    done
-    cecho "$my_string" $green
-}
-
-bash_exec() {
-    output=$($1 2>&1)
-    result=$?
-    if [ $result -eq 0 ]
-    then
-        echo_success "$1"
-    else
-        echo_error "$1: $output"
-    fi
-}
-
-set_openair() {
-     fullpath=`readlink -f $BASH_SOURCE`
-     [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
-     openair_path=${fullpath%/targets/*}
-     openair_path=${openair_path%/openair-cn/*}
-     openair_path=${openair_path%/openair[123]/*}
-
-     export OPENAIR_DIR=$openair_path
-     export OPENAIR_HOME=$openair_path
-     export OPENAIR1_DIR=$openair_path/openair1
-     export OPENAIR2_DIR=$openair_path/openair2
-     export OPENAIR3_DIR=$openair_path/openair3
-     export OPENAIRCN_DIR=$openair_path/openair-cn
-     export OPENAIR_TARGETS=$openair_path/targets
-}
-
-wait_process_started () {
-    if  [ -z "$1" ]
-    then
-        echo_error "WAITING FOR PROCESS START: NO PROCESS"
-        return 1
-    fi
-    ps -C $1 > /dev/null 2>&1
-    while [ $? -ne 0 ]; do
-        echo_warning "WAITING FOR $1 START"
-        sleep 2
-        ps -C $1 > /dev/null 2>&1
-    done
-    echo_success "PROCESS $1 STARTED"
-    return 0
-}
-
-is_process_started () {
-    if  [ -z "$1" ]
-    then
-        echo_error "WAITING FOR PROCESS START: NO PROCESS"
-        return 1
-    fi
-    ps -C $1 > /dev/null 2>&1
-    if [ $? -ne 0 ]
-    then
-        echo_success "PROCESS $1 NOT STARTED"
-        return 1
-    fi
-    echo_success "PROCESS $1 STARTED"
-    return 0
-}
-
-assert() {
-    # If condition false
-    # exit from script with error message
-    E_PARAM_ERR=98
-    E_PARAM_FAILED=99
-
-    if [ -z "$2" ] # Not enought parameters passed.
-    then
-        return $E_PARAM_ERR
-    fi
-
-    lineno=$2
-    if [ ! $1 ]
-    then
-        echo "Assertion failed:  \"$1\""
-        echo "File \"$0\", line $lineno"
-        exit $E_ASSERT_FAILED
-    fi
-}
-
-start_openswitch_daemon() {
-  rmmod -s bridge
-  is_process_started "ovsdb-server"
-  if [ $? -ne 0 ]
-  then
-      ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,manager_options --pidfile --detach
-      wait_process_started "ovsdb-server"
-  fi
-  # To be done after installation
-  # ovs-vsctl    --no-wait init
-  is_process_started "ovs-vswitchd"
-  if [ $? -ne 0 ]
-  then
-      ovs-vswitchd --pidfile --detach
-      wait_process_started "ovs-vswitchd"
-  fi
-}
-
-set_openair
-cecho "OPENAIR_DIR     = $OPENAIR_DIR" $green
-cecho "OPENAIR1_DIR    = $OPENAIR1_DIR" $green
-cecho "OPENAIR2_DIR    = $OPENAIR2_DIR" $green
-cecho "OPENAIR3_DIR    = $OPENAIR3_DIR" $green
-cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
-
-
-
-
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/enb_default.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-
-##################################################
-# LAUNCH eNB + UE executable
-##################################################
-# ONLY oai interface for UE
-declare MAKE_IP_DRIVER_TARGET="ue_ip.ko"
-declare MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim USE_MME=R10"
-declare IP_DRIVER_NAME="ue_ip"
-declare LTEIF="oip1"
-UE_IPv4="10.0.0.8"
-UE_IPv6="2001:1::8"
-UE_IPv6_CIDR=$UE_IPv6"/64"
-UE_IPv4_CIDR=$UE_IPv4"/24"
-#------------------------------------------------
-declare -a NAS_IMEI=( 3 9 1 8 3 6 6 2 0 0 0 0 0 0 )
-
-
-
-echo "Bringup UE interface"
-bash_exec "rmmod $IP_DRIVER_NAME"
-cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET ....." $green
-# bash_exec "make --directory=$OPENAIR_TARGETS/SIMU/EXAMPLES/VIRT_EMUL_1eNB $MAKE_LTE_ACCESS_STRATUM_TARGET "
-bash_exec "make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET "
-#bash_exec "make --directory=$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL "
-
-#bash_exec "insmod  $OPENAIR2_DIR/NAS/DRIVER/LITE/$IP_DRIVER_NAME.ko oai_nw_drv_IMEI=${NAS_IMEI[0]},${NAS_IMEI[1]},${NAS_IMEI[2]},${NAS_IMEI[3]},${NAS_IMEI[4]},${NAS_IMEI[5]},${NAS_IMEI[6]},${NAS_IMEI[7]},${NAS_IMEI[8]},${NAS_IMEI[9]},${NAS_IMEI[10]},${NAS_IMEI[11]},${NAS_IMEI[12]},${NAS_IMEI[13]}"
-bash_exec "insmod  $OPENAIR2_DIR/NAS/DRIVER/UE_LTE/$IP_DRIVER_NAME.ko"
-
-bash_exec "ip route flush cache"
-
-#bash_exec "ip link set $LTEIF broadcast ff:ff:ff:ff:ff:ff"
-bash_exec "ip link set $LTEIF up"
-sleep 1
-bash_exec "ip addr add dev $LTEIF $UE_IPv4_CIDR"
-bash_exec "ip addr add dev $LTEIF $UE_IPv6_CIDR"
-
-# -a     -> Add RB
-# -d    -> Delete RB
-# -cxx  -> lcr
-# -ixx  -> instance
-# -zxx  -> dscp
-# -fxxx -> classref (uid of a classifier entry) if fn is used , fn is used for send classifier and n+1 for receive classifier
-# -sxxx -> source ipv4 address
-# -txxx -> destination ipv4 address
-# -x    -> source ipv6 address
-# -y    -> destination ipv6 address
-# -r    -> radio bearer id
-#bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f0 -i1 -z0  -x 0::0/128     -y 0::0/128     -r 5"
-#bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f2 -i1 -z64 -s 0.0.0.0/32   -t 0.0.0.0/32   -r 5"
-sleep 1
-
-bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-echo "   Disabling reverse path filtering"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-
-
-bash_exec "ip route flush cache"
-
-# please add table 200 lte in/etc/iproute2/rt_tables
-ip rule add fwmark 5  table lte
-ip route add default dev $LTEIF table lte
-
-#gdb --args $OPENAIR_TARGETS/SIMU/USER/oaisim -a -u1 -l7 --mme_ip_address $MME_IP_ADDRESS_FOR_S1_MME --s1c_ip_address $ENB_IP_ADDRESS_FOR_S1_MME --s1u_ip_address $ENB_IP_ADDRESS_FOR_S1U
-echo $OPENAIR_TARGETS/SIMU/USER/oaisim -a -u1 -l7 --mme_ip_address $MME_IP_ADDRESS_FOR_S1_MME --s1c_ip_address $ENB_IP_ADDRESS_FOR_S1_MME --s1u_ip_address $ENB_IP_ADDRESS_FOR_S1U
-
-
diff --git a/openair-cn/SCRIPTS/start_lte-enb-ovs.bash b/openair-cn/SCRIPTS/start_lte-enb-ovs.bash
deleted file mode 100755
index e5e4f87f97e5ac5cd76b3d6d7cdad088a3acfa01..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_lte-enb-ovs.bash
+++ /dev/null
@@ -1,190 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# Author Lionel GAUTHIER 01/20/2014
-#
-# This script start ENB+UE (all in one executable, on one host) with openvswitch setting
-# MME+SP-GW executable have to be launched on the same host by your own (start_lte-epc-ovs.bash).
-#
-#                                                                           hss.eur
-#                                                                             |
-#        +-----------+          +------+              +-----------+           v   +----------+
-#        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    +----+      +---+   HSS    |
-#        |           |cpenb0+------------------+cpmme0|           |    +------+   |          |
-#        |           +------+   |bridge|       +------+           +----+      +---+          |
-#        |           |upenb0+-------+  |              |           |               +----------+
-#        +-----------+------+   |   |  |              +-----------+
-#                               +---|--+                    |                   router.eur
-#                                   |                 +-----------+              |   +--------------+
-#                                   |                 |  S+P-GW   |              v   |   ROUTER     |
-#                                   |  VLAN2   +------+           +-------+     +----+              +----+
-#                                   +----------+upsgw0|           |sgi    +-...-+    |              |    +---...Internet
-#                                              +------+           +-------+     +----+              +----+
-#                                                     |           |      11 VLANS    |              |
-#                                                     +-----------+   ids=[5..15]    +--------------+
-#
-###########################################################
-# Parameters
-###########################################################
-declare MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim ENABLE_ITTI=1 USE_MME=R10 NAS=1 Rel10=1"
-declare MAKE_IP_DRIVER_TARGET="ue_ip.ko"
-declare IP_DRIVER_NAME="ue_ip"
-declare LTEIF="oip1"
-declare UE_IPv4="10.0.0.8"
-declare UE_IPv6="2001:1::8"
-declare UE_IPv6_CIDR=$UE_IPv6"/64"
-declare UE_IPv4_CIDR=$UE_IPv4"/24"
-declare BRIDGE="vswitch"
-
-
-###########################################################
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-###########################################################
-test_command_install_package "gccxml"   "gccxml" "--force-yes"
-test_command_install_package "vconfig"  "vlan"
-test_command_install_package "iptables" "iptables"
-test_command_install_package "iperf"    "iperf"
-test_command_install_package "ip"       "iproute"
-test_command_install_script  "ovs-vsctl" "$OPENAIRCN_DIR/SCRIPTS/install_openvswitch1.9.0.bash"
-test_command_install_package "tunctl"  "uml-utilities"
-test_command_install_lib     "/usr/lib/libconfig.so"  "libconfig-dev"
-
-
-#######################################################
-# SOURCE $OPENAIRCN_DIR/UTILS/CONF/mme_$HOSTNAME.conf
-#######################################################
-rm -f /tmp/source.txt
-if [ -f $OPENAIRCN_DIR/UTILS/CONF/mme_$HOSTNAME.conf ]
-then
-    echo_warning "Using config file $OPENAIRCN_DIR/UTILS/CONF/mme_$HOSTNAME.conf"
-    cat $OPENAIRCN_DIR/UTILS/CONF/mme_$HOSTNAME.conf | tr -d " " > /tmp/source.txt
-    source /tmp/source.txt
-else
-    echo_warning "MME config file not found for host $HOSTNAME, using default: $OPENAIRCN_DIR/UTILS/CONF/mme_default.conf"
-    if [ -f $OPENAIRCN_DIR/UTILS/CONF/mme_default.conf ]
-    then
-	    cat $OPENAIRCN_DIR/UTILS/CONF/mme_default.conf | tr -d " " > /tmp/source.txt
-        source /tmp/source.txt
-    else
-        echo_error "Default MME config file not found, exiting"
-	fi
-fi
-
-#######################################################
-# SOURCE $OPENAIRCN_DIR/UTILS/CONF/enb_$HOSTNAME.conf
-#######################################################
-rm -f /tmp/source.txt
-if [ -f $OPENAIRCN_DIR/UTILS/CONF/enb_$HOSTNAME.conf ]
-then
-    echo_warning "Using config file $OPENAIRCN_DIR/UTILS/CONF/enb_$HOSTNAME.conf"
-    cat $OPENAIRCN_DIR/UTILS/CONF/enb_$HOSTNAME.conf | tr -d " " > /tmp/source.txt
-    source /tmp/source.txt
-else
-	echo_warning "eNB config file not found for host $HOSTNAME, using default: $OPENAIRCN_DIR/UTILS/CONF/enb_default.conf"
-    if [ -f $OPENAIRCN_DIR/UTILS/CONF/enb_default.conf ]
-    then
-	    cat $OPENAIRCN_DIR/UTILS/CONF/enb_default.conf | tr -d " " > /tmp/source.txt
-        source /tmp/source.txt
-	else
-        echo_error "Default eNB config file not found, exiting"
-	fi
-fi
-
-#######################################################
-# USIM, NVRAM files
-#######################################################
-if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data ]; then
-    make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS veryveryclean
-    make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS PROCESS=UE
-fi
-if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data ]; then
-    make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS veryveryclean
-    make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS PROCESS=UE
-fi
-if [ ! -f .ue.nvram ]; then
-    # generate .ue_emm.nvram .ue.nvram
-    $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data -g
-fi
-
-if [ ! -f .usim.nvram ]; then
-    # generate .usim.nvram
-    $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data -g
-fi
-
-##################################################
-# LAUNCH eNB + UE executable
-##################################################
-echo "Bringup UE interface"
-pkill oaisim
-bash_exec "rmmod $IP_DRIVER_NAME" > /dev/null 2>&1
-
-cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET ....." $green
-#bash_exec "make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET "
-make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET || exit 1
-#bash_exec "make --directory=$OPENAIR_TARGETS/SIMU/USER $MAKE_LTE_ACCESS_STRATUM_TARGET "
-make --directory=$OPENAIR_TARGETS/SIMU/USER $MAKE_LTE_ACCESS_STRATUM_TARGET || exit 1
-
-bash_exec "insmod  $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/$IP_DRIVER_NAME.ko"
-
-bash_exec "ip route flush cache"
-
-bash_exec "ip link set $LTEIF up"
-sleep 1
-bash_exec "ip addr add dev $LTEIF $UE_IPv4_CIDR"
-bash_exec "ip addr add dev $LTEIF $UE_IPv6_CIDR"
-
-sleep 1
-
-bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-echo "   Disabling reverse path filtering"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-
-
-bash_exec "ip route flush cache"
-
-# Check table 200 lte in /etc/iproute2/rt_tables
-fgrep lte /etc/iproute2/rt_tables
-if [ $? -ne 0 ]; then
-    echo "200 lte " >> /etc/iproute2/rt_tables
-fi
-ip rule add fwmark 5 table lte
-ip route add default dev $LTEIF table lte
-
-ITTI_LOG_FILE=/tmp/itti_enb.log
-rotate_log_file $ITTI_LOG_FILE
-
-
-#gdb --args
-$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u1 -l7 -K $ITTI_LOG_FILE -O $MME_IP_ADDRESS_FOR_S1_MME
-
-
diff --git a/openair-cn/SCRIPTS/start_lte-epc.bash b/openair-cn/SCRIPTS/start_lte-epc.bash
deleted file mode 100755
index 7f5edbdc3404a3e7c51602ac32111750a53650e5..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_lte-epc.bash
+++ /dev/null
@@ -1,352 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# start MME+S/P-GW with openvswitch setting
-
-#                                                                              hss.eur
-#        +-----------+          +------+              +-----------+           v   +----------+
-#        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    +----+      +---+   HSS    |
-#        |           |cpenb0+------------------+cpmme0|           |    +------+   |          |
-#        |           +------+   |bridge|       +------+           +----+      +---+          |
-#        |           |upenb0+-------+  |              |           |               +----------+
-#        +-----------+------+   |   |  |              +-----------+
-#                               +---|--+                    |                   router.eur
-#                                   |                 +-----------+              |   +--------------+
-#                                   |                 |  S+P-GW   |              v   |   ROUTER     |
-#                                   |  VLAN2   +------+           +-------+     +----+              +----+
-#                                   +----------+upsgw0|           |sgi    +-...-+    |              |    +---...Internet
-#                                              +------+           +-------+     +----+              +----+
-#                                                     |           |      11 VLANS    |              |
-#                                                     +-----------+   ids=[5..15]    +--------------+
-#
-
-
-BRIDGE="vswitch"
-IPTABLES=/sbin/iptables
-
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-
-cleanvlan() {
-    echo "Caught a signal -> Exiting"
-
-    bash_exec "ovs-vsctl del-br       $BRIDGE"
-    for i in 5 6 7 8 9 10 11 12 13 14 15
-    do
-        # create vlan interface
-        bash_exec "vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i"
-        sync
-    done
-
-    pkill oai_epc
-    exit 0
-}
-
-###########################################################
-
-declare -x OPENAIR_DIR=""
-declare -x OPENAIR1_DIR=""
-declare -x OPENAIR2_DIR=""
-declare -x OPENAIR3_DIR=""
-declare -x OPENAIR_TARGETS=""
-###########################################################
-
-set_openair
-cecho "OPENAIR_DIR     = $OPENAIR_DIR" $green
-cecho "OPENAIR1_DIR    = $OPENAIR1_DIR" $green
-cecho "OPENAIR2_DIR    = $OPENAIR2_DIR" $green
-cecho "OPENAIR3_DIR    = $OPENAIR3_DIR" $green
-cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
-
-check_for_root_rights
-check_for_epc_executable
-check_enb_config
-check_epc_config
-
-cat $OPENAIR3_DIR/OPENAIRMME/objs/Makefile | grep CFLAGS\ \=\  | grep DENABLE_USE_NETFILTER_FOR_SGI
-if [ $? -ne 0 ]
-then
-    export ENABLE_USE_NETFILTER_FOR_SGI=0
-else
-    export ENABLE_USE_NETFILTER_FOR_SGI=1
-fi
-
-cat $OPENAIR3_DIR/OPENAIRMME/objs/Makefile | grep CFLAGS\ \=\  | grep DENABLE_USE_RAW_FOR_SGI
-if [ $? -ne 0 ]
-then
-    export ENABLE_USE_RAW_FOR_SGI=0
-else
-    export ENABLE_USE_RAW_FOR_SGI=1
-fi
-
-pkill oaisim_mme
-pkill oai_epc
-pkill oai_sgw
-
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/enb_$HOSTNAME.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-ping -c 1 hss.eur || { echo "hss.eur does not respond to ping" >&2 ; exit ; }
-ping -c 1 router.eur || { echo "router.eur does not respond to ping" >&2 ; exit ; }
-
-IP_ROUTER=`python -c 'import socket; print socket.gethostbyname("router.eur")'`
-export MAC_ROUTER=`ip neigh show | grep $IP_ROUTER | cut -d ' '  -f5 | tr -d ':'`
-
-trap cleanvlan SIGINT SIGKILL SIGTERM
-
-echo_success "ROUTER MAC ADDRESS= $MAC_ROUTER"
-bash_exec "modprobe tun"
-bash_exec "modprobe ip_tables"
-bash_exec "modprobe iptable_nat"
-bash_exec "modprobe x_tables"
-
-bash_exec "$IPTABLES -P INPUT ACCEPT"
-bash_exec "$IPTABLES -F INPUT"
-bash_exec "$IPTABLES -P OUTPUT ACCEPT"
-bash_exec "$IPTABLES -F OUTPUT"
-bash_exec "$IPTABLES -P FORWARD ACCEPT"
-bash_exec "$IPTABLES -F FORWARD"
-bash_exec "$IPTABLES -t raw    -F"
-bash_exec "$IPTABLES -t nat    -F"
-bash_exec "$IPTABLES -t mangle -F"
-bash_exec "$IPTABLES -t filter -F"
-
-bash_exec "ip route flush cache"
-
-
-echo "   Disabling forwarding"
-bash_exec "sysctl -w net.ipv4.ip_forward=0"
-assert "  `sysctl -n net.ipv4.ip_forward` -eq 0" $LINENO
-
-echo "   Enabling DynamicAddr.."
-bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
-assert "  `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
-
-bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-
-echo "   Disabling reverse path filtering"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-
-
-start_openswitch_daemon
-# REMINDER:
-#        +-----------+          +------+              +-----------+
-#        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    |
-#        |           |cpenb0+------------------+cpmme0|           |
-#        |           +------+   |bridge|       +------+           |
-#        |           |upenb0+-------+  |              |           |
-#        +-----------+------+   |   |  |              +-----------+
-#                               +---|--+                    |
-#                                   |                 +-----------+
-#                                   |                 |  S+P-GW   |
-#                                   |  VLAN2   +------+           +-------+   +----+    +----+
-#                                   +----------+upsgw0|           |pgwsgi0+---+br2 +----+eth0|
-#                                              +------+           +-------+   +----+    +----+
-#                                                     |           |
-#                                                     +-----------+
-#
-##################################################
-# del bridge between eNB and MME/SPGW
-##################################################
-bash_exec "tunctl -d $ENB_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -d $ENB_INTERFACE_NAME_FOR_S1U"
-bash_exec "tunctl -d $MME_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -d $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
-bash_exec "ovs-vsctl del-br       $BRIDGE"
-
-##################################################
-# build bridge between eNB and MME/SPGW
-##################################################
-bash_exec "tunctl -t $ENB_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -t $ENB_INTERFACE_NAME_FOR_S1U"
-bash_exec "tunctl -t $MME_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -t $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
-
-bash_exec "ovs-vsctl add-br       $BRIDGE"
-bash_exec "ovs-vsctl add-port     $BRIDGE $ENB_INTERFACE_NAME_FOR_S1_MME        tag=1"
-bash_exec "ovs-vsctl add-port     $BRIDGE $MME_INTERFACE_NAME_FOR_S1_MME        tag=1"
-bash_exec "ovs-vsctl add-port     $BRIDGE $ENB_INTERFACE_NAME_FOR_S1U           tag=2"
-bash_exec "ovs-vsctl add-port     $BRIDGE $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP tag=2"
-
-bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME promisc up"
-bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME $MME_IP_ADDRESS_FOR_S1_MME netmask `cidr2mask $MME_IP_NETMASK_FOR_S1_MME` promisc up"
-bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP promisc up"
-bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP $SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP netmask `cidr2mask $SGW_IP_NETMASK_FOR_S1U_S12_S4_UP` promisc up"
-
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME promisc up"
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME $ENB_IP_ADDRESS_FOR_S1_MME netmask `cidr2mask $ENB_IP_NETMASK_FOR_S1_MME` promisc up"
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U promisc up"
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U $ENB_IP_ADDRESS_FOR_S1U netmask `cidr2mask $ENB_IP_NETMASK_FOR_S1U` promisc up"
-
-##################################################
-# del bridge between SPGW and Internet
-##################################################
-#bash_exec "tunctl -d $PGW_INTERFACE_NAME_FOR_SGI"
-#bash_exec "ovs-vsctl del-br       $SGI_BRIDGE"
-
-##################################################
-# build bridge between SPGW and Internet
-##################################################
-
-# # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
-# IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
-# if [ $IP_ADDR ]; then
-#   bash_exec "ip -4 addr del $IP_ADDR dev $PGW_INTERFACE_NAME_FOR_SGI"
-# fi
-#
-# # remove all ipv6 address from PGW_INTERFACE_NAME_FOR_SGI
-# IP_ADDR="not empty"
-# until [ "$IP_ADDR"x == "x" ]; do
-#   IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | grep 'inet6' | head -1 | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}' | cut -d ' ' -f3`
-#   if [ $IP_ADDR ]; then
-#     bash_exec "ip -6 addr del $IP_ADDR dev $PGW_INTERFACE_NAME_FOR_SGI"
-#   fi
-# done
-
-if [ $ENABLE_USE_NETFILTER_FOR_SGI -eq 1 ]; then
-
-    bash_exec "modprobe nf_conntrack"
-    bash_exec "modprobe nf_conntrack_ftp"
-
-    ######################################################
-    # PREROUTING
-    ######################################################
-    # We restore the mark following the CONNMARK mark. In fact, it does a simple MARK=CONNMARK
-    # where MARK is the standard mark (usable by tc)
-    # In French: Cette option de cible restaure le paquet marqué dans la marque de connexion
-    # comme défini par CONNMARK. Un masque peut aussi être défini par l'option --mask.
-    # Si une option mask est placée, seules les options masquées seront placées.
-    # Notez que cette option de cible n'est valide que dans la table mangle.
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -j CONNMARK --restore-mark"
-
-    # TEST bash_exec "$IPTABLES -t mangle -A PREROUTING -m mark --mark 0 -i $PGW_INTERFACE_NAME_FOR_SGI -j MARK --set-mark 15"
-    # We set the mark of the initial packet as value of the conntrack mark for all the packets of the connection.
-    # This mark will be restore for the other packets by the first rule of POSTROUTING --restore-mark).
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -j CONNMARK --save-mark"
-
-
-    ######################################################
-    # POSTROUTING
-    ######################################################
-
-    # MARK=CONNMARK
-    bash_exec "iptables -A POSTROUTING -t mangle -o tap0 -j CONNMARK --restore-mark"
-    # If we’ve got a mark no need to get further[
-    bash_exec "iptables -A POSTROUTING -t mangle -o tap0 -m mark ! --mark 0 -j ACCEPT"
-
-    #bash_exec "iptables -A POSTROUTING -p tcp --dport 21 -t mangle -j MARK --set-mark 1"
-    #bash_exec "iptables -A POSTROUTING -p tcp --dport 80 -t mangle -j MARK --set-mark 2"
-
-    # We set the mark of the initial packet as value of the conntrack mark for all the packets
-    # of the connection. This mark will be restore for the other packets by the first rule
-    # of POSTROUTING (–restore-mark).
-    bash_exec "iptables -A POSTROUTING -t mangle -j CONNMARK --save-mark"
-
-    bash_exec "iptables -A PREROUTING  -t mangle -j CONNMARK --restore-mark"
-
-    # We restore the mark following the CONNMARK mark.
-    # In fact, it does a simple MARK=CONNMARK where MARK is the standard mark (usable by tc)
-    #bash_exec "$IPTABLES -A OUTPUT -t mangle -m mark ! --mark 0 -j CONNMARK --restore-mark"
-
-    # If we’ve got a mark no need to get further[1]
-    #TEST bash_exec "$IPTABLES -A OUTPUT -t mangle -p icmp -j MARK --set-mark 14"
-    #bash_exec "$IPTABLES -A OUTPUT -t mangle -m mark ! --mark 0 -j ACCEPT"
-
-
-    # We set the mark of the initial packet as value of the conntrack mark for all the packets of the connection.
-    # This mark will be restore for the other packets by the first rule of OUTPUT (–restore-mark).
-    #bash_exec "$IPTABLES -A OUTPUT -t mangle -j CONNMARK --save-mark"
-
-    ######################################################
-    # NETFILTER QUEUE
-    ######################################################
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 5 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 6 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 7 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 8 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 9 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 10 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 11 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 12 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 13 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 14 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 15 -j NFQUEUE --queue-num 1"
-
-    #echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables #To disable Iptables in the bridge.
-    #Raw table: Some years ago appeared a new tables in Iptables.
-    #This table can be used to avoid packets (connection really) to enter the NAT table:
-    # iptables -t raw -I PREROUTING -i BRIDGE -s x.x.x.x -j NOTRACK.
-
-    #bash_exec "$IPTABLES -t nat -A POSTROUTING -o $PGW_INTERFACE_NAME_FOR_SGI -j SNAT --to-source $PGW_IP_ADDR_FOR_SGI"
-else
-    # # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
-    #IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
-
-    #NETWORK=`echo $IP_ADDR | cut -d . -f 1,2,3`
-
-    bash_exec "modprobe 8021q"
-
-    for i in 5 6 7 8 9 10 11 12 13 14 15
-    do
-        # create vlan interface
-        bash_exec "vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i"
-        sync
-        bash_exec "vconfig add $PGW_INTERFACE_NAME_FOR_SGI $i"
-        sync
-        # configure vlan interface
-        #CIDR=$NETWORK'.'$i'/24'
-        base=200
-        NET=$(( $i + $base ))
-        CIDR='10.0.'$NET'.2/8'
-        bash_exec "ip -4 addr add  $CIDR dev $PGW_INTERFACE_NAME_FOR_SGI.$i"
-    done
-fi
-
-
-bash_exec "ip link set $PGW_INTERFACE_NAME_FOR_SGI promisc on"
-##################################################..
-
-# LAUNCH MME + S+P-GW executable
-##################################################
-#$OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/oaisim_mme -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf
-#wait_process_started "oaisim_mme"
-
-gdb --args $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/oai_epc -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf
-wait_process_started "oai_epc"
-
-#gdb --args  $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/oai_epc -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf
-
diff --git a/openair-cn/SCRIPTS/start_lte-sgw.bash b/openair-cn/SCRIPTS/start_lte-sgw.bash
deleted file mode 100644
index 073d9624e8dab3970b1a794c1c486662388f2c7a..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_lte-sgw.bash
+++ /dev/null
@@ -1,338 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# start MME+S/P-GW with openvswitch setting
-
-                                                                              hss.eur
-#        +-----------+          +------+              +-----------+           v   +----------+
-#        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    +----+      +---+   HSS    |
-#        |           |cpenb0+------------------+cpmme0|           |    +------+   |          |
-#        |           +------+   |bridge|       +------+           +----+      +---+          |
-#        |           |upenb0+-------+  |              |           |               +----------+
-#        +-----------+------+   |   |  |              +-----------+
-#                               +---|--+                    |                   router.eur
-#                                   |                 +-----------+              |   +--------------+
-#                                   |                 |  S+P-GW   |              v   |   ROUTER     |
-#                                   |  VLAN2   +------+           +-------+     +----+              +----+
-#                                   +----------+upsgw0|           |sgi    +-...-+    |              |    +---...Internet
-#                                              +------+           +-------+     +----+              +----+
-#                                                     |           |      11 VLANS    |              |
-#                                                     +-----------+   ids=[5..15]    +--------------+
-#
-
-
-BRIDGE="vswitch"
-
-###########################################################
-IPTABLES=/sbin/iptables
-
-###########################################################
-
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-
-###########################################################
-declare -x OPENAIR_DIR=""
-declare -x OPENAIR1_DIR=""
-declare -x OPENAIR2_DIR=""
-declare -x OPENAIR3_DIR=""
-declare -x OPENAIR_TARGETS=""
-###########################################################
-
-set_openair
-cecho "OPENAIR_DIR     = $OPENAIR_DIR" $green
-cecho "OPENAIR1_DIR    = $OPENAIR1_DIR" $green
-cecho "OPENAIR2_DIR    = $OPENAIR2_DIR" $green
-cecho "OPENAIR3_DIR    = $OPENAIR3_DIR" $green
-cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
-
-cat ./objs/Makefile | grep CFLAGS\ \=\  | grep DENABLE_USE_NETFILTER_FOR_SGI
-if [ $? -ne 0 ]
-then
-    export ENABLE_USE_NETFILTER_FOR_SGI=0
-else
-    export ENABLE_USE_NETFILTER_FOR_SGI=1
-fi
-
-cat ./objs/Makefile | grep CFLAGS\ \=\  | grep DENABLE_USE_RAW_FOR_SGI
-if [ $? -ne 0 ]
-then
-    export ENABLE_USE_RAW_FOR_SGI=0
-else
-    export ENABLE_USE_RAW_FOR_SGI=1
-fi
-
-pkill oaisim_mme
-
-
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/enb_default.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-ping -c 1 hss.eur || { echo "hss.eur does not respond to ping" >&2 ; exit ; }
-ping -c 1 router.eur || { echo "router.eur does not respond to ping" >&2 ; exit ; }
-export IP_ROUTER=`python -c 'import socket; print socket.gethostbyname("router.eur")'`
-export MAC_ROUTER=`ip neigh show | grep $IP_ROUTER | cut -d ' '  -f5 | tr -d ':'`
-echo_success "ROUTER MAC ADDRESS= $MAC_ROUTER"
-bash_exec "modprobe tun"
-bash_exec "modprobe ip_tables"
-bash_exec "modprobe iptable_nat"
-bash_exec "modprobe x_tables"
-
-bash_exec "$IPTABLES -P INPUT ACCEPT"
-bash_exec "$IPTABLES -F INPUT"
-bash_exec "$IPTABLES -P OUTPUT ACCEPT"
-bash_exec "$IPTABLES -F OUTPUT"
-bash_exec "$IPTABLES -P FORWARD ACCEPT"
-bash_exec "$IPTABLES -F FORWARD"
-bash_exec "$IPTABLES -t raw    -F"
-bash_exec "$IPTABLES -t nat    -F"
-bash_exec "$IPTABLES -t mangle -F"
-bash_exec "$IPTABLES -t filter -F"
-
-
-
-bash_exec "ip route flush cache"
-
-
-echo "   Disabling forwarding"
-bash_exec "sysctl -w net.ipv4.ip_forward=0"
-assert "  `sysctl -n net.ipv4.ip_forward` -eq 0" $LINENO
-
-echo "   Enabling DynamicAddr.."
-bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
-assert "  `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
-
-bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-
-echo "   Disabling reverse path filtering"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-
-
-start_openswitch_daemon
-# REMINDER:
-#        +-----------+          +------+              +-----------+
-#        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    |
-#        |           |cpenb0+------------------+cpmme0|           |
-#        |           +------+   |bridge|       +------+           |
-#        |           |upenb0+-------+  |              |           |
-#        +-----------+------+   |   |  |              +-----------+
-#                               +---|--+                    |
-#                                   |                 +-----------+
-#                                   |                 |  S+P-GW   |
-#                                   |  VLAN2   +------+           +-------+   +----+    +----+
-#                                   +----------+upsgw0|           |pgwsgi0+---+br2 +----+eth0|
-#                                              +------+           +-------+   +----+    +----+
-#                                                     |           |
-#                                                     +-----------+
-#
-##################################################
-# del bridge between eNB and MME/SPGW
-##################################################
-bash_exec "tunctl -d $ENB_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -d $ENB_INTERFACE_NAME_FOR_S1U"
-bash_exec "tunctl -d $MME_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -d $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
-bash_exec "ovs-vsctl del-br       $BRIDGE"
-
-##################################################
-# build bridge between eNB and MME/SPGW
-##################################################
-bash_exec "tunctl -t $ENB_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -t $ENB_INTERFACE_NAME_FOR_S1U"
-bash_exec "tunctl -t $MME_INTERFACE_NAME_FOR_S1_MME"
-bash_exec "tunctl -t $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
-
-bash_exec "ovs-vsctl add-br       $BRIDGE"
-bash_exec "ovs-vsctl add-port     $BRIDGE $ENB_INTERFACE_NAME_FOR_S1_MME        tag=1"
-bash_exec "ovs-vsctl add-port     $BRIDGE $MME_INTERFACE_NAME_FOR_S1_MME        tag=1"
-bash_exec "ovs-vsctl add-port     $BRIDGE $ENB_INTERFACE_NAME_FOR_S1U           tag=2"
-bash_exec "ovs-vsctl add-port     $BRIDGE $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP tag=2"
-
-bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME promisc up"
-bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME $MME_IP_ADDRESS_FOR_S1_MME netmask `cidr2mask $MME_IP_NETMASK_FOR_S1_MME` promisc up"
-bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP promisc up"
-bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP $SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP netmask `cidr2mask $SGW_IP_NETMASK_FOR_S1U_S12_S4_UP` promisc up"
-
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME promisc up"
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME $ENB_IP_ADDRESS_FOR_S1_MME netmask `cidr2mask $ENB_IP_NETMASK_FOR_S1_MME` promisc up"
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U promisc up"
-bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U $ENB_IP_ADDRESS_FOR_S1U netmask `cidr2mask $ENB_IP_NETMASK_FOR_S1U` promisc up"
-
-##################################################
-# del bridge between SPGW and Internet
-##################################################
-#bash_exec "tunctl -d $PGW_INTERFACE_NAME_FOR_SGI"
-#bash_exec "ovs-vsctl del-br       $SGI_BRIDGE"
-
-##################################################
-# build bridge between SPGW and Internet
-##################################################
-
-# # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
-# IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
-# if [ $IP_ADDR ]; then
-#   bash_exec "ip -4 addr del $IP_ADDR dev $PGW_INTERFACE_NAME_FOR_SGI"
-# fi
-# 
-# # remove all ipv6 address from PGW_INTERFACE_NAME_FOR_SGI
-# IP_ADDR="not empty"
-# until [ "$IP_ADDR"x == "x" ]; do
-#   IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | grep 'inet6' | head -1 | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}' | cut -d ' ' -f3`
-#   if [ $IP_ADDR ]; then
-#     bash_exec "ip -6 addr del $IP_ADDR dev $PGW_INTERFACE_NAME_FOR_SGI"
-#   fi
-# done
-
-if [ $ENABLE_USE_NETFILTER_FOR_SGI -eq 1 ]; then 
-
-    bash_exec "modprobe nf_conntrack"
-    bash_exec "modprobe nf_conntrack_ftp"
-
-    ######################################################
-    # PREROUTING 
-    ######################################################
-    # We restore the mark following the CONNMARK mark. In fact, it does a simple MARK=CONNMARK 
-    # where MARK is the standard mark (usable by tc)
-    # In French: Cette option de cible restaure le paquet marqué dans la marque de connexion 
-    # comme défini par CONNMARK. Un masque peut aussi être défini par l'option --mask. 
-    # Si une option mask est placée, seules les options masquées seront placées. 
-    # Notez que cette option de cible n'est valide que dans la table mangle.
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -j CONNMARK --restore-mark"
-    
-    # TEST bash_exec "$IPTABLES -t mangle -A PREROUTING -m mark --mark 0 -i $PGW_INTERFACE_NAME_FOR_SGI -j MARK --set-mark 15"
-    # We set the mark of the initial packet as value of the conntrack mark for all the packets of the connection. 
-    # This mark will be restore for the other packets by the first rule of POSTROUTING --restore-mark).
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -j CONNMARK --save-mark"
-
-
-    ######################################################
-    # POSTROUTING 
-    ######################################################
-    
-    # MARK=CONNMARK
-    bash_exec "iptables -A POSTROUTING -t mangle -o tap0 -j CONNMARK --restore-mark"
-    # If we’ve got a mark no need to get further[
-    bash_exec "iptables -A POSTROUTING -t mangle -o tap0 -m mark ! --mark 0 -j ACCEPT"
-    
-    #bash_exec "iptables -A POSTROUTING -p tcp --dport 21 -t mangle -j MARK --set-mark 1"
-    #bash_exec "iptables -A POSTROUTING -p tcp --dport 80 -t mangle -j MARK --set-mark 2"
-    
-    # We set the mark of the initial packet as value of the conntrack mark for all the packets 
-    # of the connection. This mark will be restore for the other packets by the first rule 
-    # of POSTROUTING (–restore-mark).
-    bash_exec "iptables -A POSTROUTING -t mangle -j CONNMARK --save-mark"
-    
-    bash_exec "iptables -A PREROUTING  -t mangle -j CONNMARK --restore-mark"
-
-    # We restore the mark following the CONNMARK mark. 
-    # In fact, it does a simple MARK=CONNMARK where MARK is the standard mark (usable by tc)
-    #bash_exec "$IPTABLES -A OUTPUT -t mangle -m mark ! --mark 0 -j CONNMARK --restore-mark"
-    
-    # If we’ve got a mark no need to get further[1]
-    #TEST bash_exec "$IPTABLES -A OUTPUT -t mangle -p icmp -j MARK --set-mark 14"
-    #bash_exec "$IPTABLES -A OUTPUT -t mangle -m mark ! --mark 0 -j ACCEPT"
-    
-    
-    # We set the mark of the initial packet as value of the conntrack mark for all the packets of the connection. 
-    # This mark will be restore for the other packets by the first rule of OUTPUT (–restore-mark).
-    #bash_exec "$IPTABLES -A OUTPUT -t mangle -j CONNMARK --save-mark"
-    
-
-
-    
-    ######################################################
-    # NETFILTER QUEUE 
-    ######################################################
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 5 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 6 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 7 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 8 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 9 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 10 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 11 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 12 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 13 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 14 -j NFQUEUE --queue-num 1"
-    bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 15 -j NFQUEUE --queue-num 1"
-    
-    #echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables #To disable Iptables in the bridge.
-    #Raw table: Some years ago appeared a new tables in Iptables. 
-    #This table can be used to avoid packets (connection really) to enter the NAT table: 
-    # iptables -t raw -I PREROUTING -i BRIDGE -s x.x.x.x -j NOTRACK.
-    
-    
-    
-
-    #bash_exec "$IPTABLES -t nat -A POSTROUTING -o $PGW_INTERFACE_NAME_FOR_SGI -j SNAT --to-source $PGW_IP_ADDR_FOR_SGI"
-else
-    # # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
-    #IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
-
-    #NETWORK=`echo $IP_ADDR | cut -d . -f 1,2,3`
-
-    bash_exec "modprobe 8021q"
-    
-    for i in 5 6 7 8 9 10 11 12 13 14 15
-    do
-        # create vlan interface
-        bash_exec "vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i"
-        sync
-        bash_exec "vconfig add $PGW_INTERFACE_NAME_FOR_SGI $i"
-        sync
-        # configure vlan interface
-        #CIDR=$NETWORK'.'$i'/24'
-        base=200
-        NET=$(( $i + $base ))
-        CIDR='10.0.'$NET'.2/8'
-        bash_exec "ip -4 addr add  $CIDR dev $PGW_INTERFACE_NAME_FOR_SGI.$i"
-    done
-fi
-
-
-bash_exec "ip link set $PGW_INTERFACE_NAME_FOR_SGI promisc on"
-##################################################..
-
-# LAUNCH MME + S+P-GW executable 
-##################################################
-#$OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/oaisim_mme -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf 
-#wait_process_started "oaisim_mme"
-
-gdb --args $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/oai_epc -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf
-wait_process_started "oai_epc"
-
-#gdb --args  $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/oai_epc -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/mme_default.conf 
-
diff --git a/openair-cn/SCRIPTS/start_mme.bash b/openair-cn/SCRIPTS/start_mme.bash
deleted file mode 100755
index 099daeb727672350b043b2951ed9e2a697e07e25..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_mme.bash
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# start MME without configuring anything in networking
-
-###############################
-# Include misc functions
-###############################
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-
-# check_for_root_rights
-check_for_mme_executable
-check_epc_config
-
-###############################
-# Test reachability of HSS
-###############################
-ping -c 1 hss.eur || { echo "hss.eur does not respond to ping" >&2 ; exit ; }
-
-###############################
-# Test reachability of MME
-###############################
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-ping -c 1 $MME_IP_ADDRESS_FOR_S1_MME  || { echo "MME_IP_ADDRESS_FOR_S1_MME=$MME_IP_ADDRESS_FOR_S1_MME does not respond to ping" >&2 ; exit ; }
-ping -c 1 $SGW_IP_ADDRESS_FOR_S11 || { echo "SGW_IP_ADDRESS_FOR_S11=$SGW_IP_ADDRESS_FOR_S11 does not respond to ping" >&2 ; exit ; }
-
-
-###############################
-cecho "Starting MME on host $HOSTNAME" $blue
-###############################
-$OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/oaisim_mme -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf
-
-
diff --git a/openair-cn/SCRIPTS/start_router.eur.bash b/openair-cn/SCRIPTS/start_router.eur.bash
deleted file mode 100755
index e71ba6dae73e83a336f0f298e2cb4e1645b1be0c..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_router.eur.bash
+++ /dev/null
@@ -1,249 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-#
-# The location of the iptables and kernel module programs
-#
-#   If your Linux distribution came with a copy of iptables,
-#   most likely all the programs will be located in /sbin.  If
-#   you manually compiled iptables, the default location will
-#   be in /usr/local/sbin
-#
-# ** Please use the "whereis iptables" command to figure out
-# ** where your copy is and change the path below to reflect
-# ** your setup
-#
-IPTABLES=/sbin/iptables
-DEPMOD=/sbin/depmod
-MODPROBE=/sbin/modprobe
-
-###########################################################
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-###########################################################
-
-#Setting the EXTERNAL and INTERNAL interfaces for the network
-#
-
-EXTIF="eth0"
-INTIF="eth2"
-echo "   External Interface:  $EXTIF"
-echo "   Internal Interface:  $INTIF"
-
-echo -en "   loading modules: "
-
-# Need to verify that all modules have all required dependencies
-#
-echo "  - Verifying that all kernel modules are ok"
-$DEPMOD -a
-
-echo "----------------------------------------------------------------------"
-
-#Load the main body of the IPTABLES module - "iptable"
-#  - Loaded automatically when the "iptables" command is invoked
-#
-#  - Loaded manually to clean up kernel auto-loading timing issues
-#
-echo -en "ip_tables, "
-$MODPROBE ip_tables
-
-
-#Load the IPTABLES filtering module - "iptable_filter"
-#  - Loaded automatically when filter policies are activated
-
-
-#Load the stateful connection tracking framework - "ip_conntrack"
-#
-# The conntrack  module in itself does nothing without other specific
-# conntrack modules being loaded afterwards such as the "ip_conntrack_ftp"
-# module
-#
-#  - This module is loaded automatically when MASQ functionality is
-#    enabled
-#
-#  - Loaded manually to clean up kernel auto-loading timing issues
-#
-echo -en "ip_conntrack, "
-$MODPROBE ip_conntrack
-
-
-#Load the FTP tracking mechanism for full FTP tracking
-#
-# Enabled by default -- insert a "#" on the next line to deactivate
-#
-echo -en "ip_conntrack_ftp, "
-$MODPROBE ip_conntrack_ftp
-
-
-#Load the IRC tracking mechanism for full IRC tracking
-#
-# Enabled by default -- insert a "#" on the next line to deactivate
-#
-echo -en "ip_conntrack_irc, "
-$MODPROBE ip_conntrack_irc
-
-
-#Load the general IPTABLES NAT code - "iptable_nat"
-#  - Loaded automatically when MASQ functionality is turned on
-#
-#  - Loaded manually to clean up kernel auto-loading timing issues
-#
-echo -en "iptable_nat, "
-$MODPROBE iptable_nat
-
-
-#Loads the FTP NAT functionality into the core IPTABLES code
-# Required to support non-PASV FTP.
-#
-# Enabled by default -- insert a "#" on the next line to deactivate
-#
-echo -en "ip_nat_ftp, "
-$MODPROBE ip_nat_ftp
-
-#Clearing any previous configuration
-#
-#  Unless specified, the defaults for INPUT and OUTPUT is ACCEPT
-#    The default for FORWARD is DROP (REJECT is not a valid policy)
-#
-#   Isn't ACCEPT insecure?  To some degree, YES, but this is our testing
-#   phase.  Once we know that IPMASQ is working well, I recommend you run
-#   the rc.firewall-*-stronger rulesets which set the defaults to DROP but
-#   also include the critical additional rulesets to still let you connect to
-#   the IPMASQ server, etc.
-#
-echo "   Clearing any existing rules and setting default policy.."
-bash_exec "iptables -P INPUT ACCEPT"
-bash_exec "iptables -F INPUT"
-bash_exec "iptables -P OUTPUT ACCEPT"
-bash_exec "iptables -F OUTPUT"
-bash_exec "iptables -P FORWARD ACCEPT"
-bash_exec "iptables -F FORWARD"
-bash_exec "iptables -t nat -F"
-bash_exec "iptables -t mangle -F"
-bash_exec "iptables -t filter -F"
-bash_exec "iptables -t raw -F"
-
-bash_exec "ip route flush cache"
-
-
-echo "   Enabling forwarding"
-bash_exec "sysctl -w net.ipv4.ip_forward=1"
-assert "  `sysctl -n net.ipv4.ip_forward` -eq 1" $LINENO
-
-# Dynamic IP users:
-#
-#   If you get your IP address dynamically from SLIP, PPP, or DHCP,
-#   enable this following option.  This enables dynamic-address hacking
-#   which makes the life with Diald and similar programs much easier.
-#
-echo "   Enabling DynamicAddr.."
-bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
-assert "  `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
-
-bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-
-echo "   Disabling reverse path filtering"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_forward=0"
-assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$EXTIF.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.$EXTIF.rp_filter` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$INTIF.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.$INTIF.rp_filter` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$EXTIF.rp_forward=0"
-assert "  `sysctl -n net.ipv4.conf.$EXTIF.rp_forward` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$INTIF.rp_forward=0"
-assert "  `sysctl -n net.ipv4.conf.$INTIF.rp_forward` -eq 0" $LINENO
-
-
-echo "0" > /proc/sys/net/ipv4/conf/all/proxy_arp
-echo "1" > /proc/sys/net/ipv4/conf/$EXTIF/proxy_arp
-echo "1" > /proc/sys/net/ipv4/conf/$INTIF/proxy_arp
-
-echo "   FWD: Allow all connections OUT and only existing and related ones IN"
-bash_exec "iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT"
-bash_exec "iptables -A FORWARD -i $INTIF -o $EXTIF -m state --state NEW,ESTABLISHED,RELATED,INVALID -j ACCEPT"
-
-bash_exec "modprobe 8021q"
-
-for i in 5 6 7 8 9 10 11 12 13 14 15
-do
-    bash_exec "vconfig rem $INTIF.$i"
-    sync
-    bash_exec "vconfig add $INTIF $i"
-    sync
-    NET=$(( $i + 200 ))
-    CIDR='10.0.'$NET'.1/8'
-    bash_exec "ip -4 addr add $CIDR broadcast 192.174.$NET.255 dev $INTIF.$i"
-    bash_exec "iptables -A FORWARD -i $EXTIF -o $INTIF.$i -m state --state ESTABLISHED,RELATED -j ACCEPT"
-    bash_exec "iptables -A FORWARD -i $INTIF.$i -o $EXTIF -m state --state NEW,ESTABLISHED,RELATED,INVALID -j ACCEPT"
-    bash_exec "echo 1 > /proc/sys/net/ipv4/conf/$INTIF.$i/proxy_arp"
-    bash_exec "echo 0 > /proc/sys/net/ipv4/conf/$INTIF.$i/rp_forward"
-    bash_exec "echo 0 > /proc/sys/net/ipv4/conf/$INTIF.$i/rp_filter"
-    assert "  `sysctl -n net.ipv4.conf.$INTIF.$i.proxy_arp` -eq 1" $LINENO
-    assert "  `sysctl -n net.ipv4.conf.$INTIF.$i.rp_forward` -eq 0" $LINENO
-    assert "  `sysctl -n net.ipv4.conf.$INTIF.$i.rp_filter` -eq 0" $LINENO
-done
-for i in 5 6 7 8 9 10 11 12 13 14 15
-do
-    bash_exec "iptables  -t mangle -A PREROUTING -i $INTIF.$i -j CONNMARK --restore-mark"
-    bash_exec "iptables  -t mangle -A PREROUTING -i $INTIF.$i -m mark --mark 0 -j MARK --set-mark $i"
-    bash_exec "iptables  -t mangle -A PREROUTING -i $INTIF.$i -j CONNMARK --save-mark"
-
-
-    fgrep  vlan$i /etc/iproute2/rt_tables
-    if [ $? -ne 0 ]
-    then
-        base=200
-        num=$(( $i + $base ))
-        echo "$num vlan$i" >>  /etc/iproute2/rt_tables
-        echo "Updating /etc/iproute2/rt_tables with table vlan$i id $num"
-    fi
-    ip rule del from all iif $EXTIF  fwmark $i table vlan$i > /dev/null
-    bash_exec "ip rule add iif $EXTIF fwmark $i table vlan$i"
-    bash_exec "ip route add default dev $INTIF.$i table vlan$i"
-done
-#bash_exec "iptables  -t mangle -A OUTPUT -m mark ! --mark 0 -j CONNMARK --save-mark"
-#iptables -I INPUT      -i $INTIF.5 -j LOG --log-ip-options --log-prefix "INPUT CHAIN:"
-#iptables -I FORWARD  -t mangle  -i $INTIF.5 -j LOG --log-ip-options --log-prefix "FORWARD CHAIN(mangle):"
-#iptables -I FORWARD  -t filter  -i $INTIF.5 -j LOG --log-ip-options --log-prefix "FORWARD CHAIN(filter):"
-#iptables -I PREROUTING -t raw -i $INTIF.5 -j LOG --log-ip-options --log-prefix "PREROUTING (raw):"
-#iptables -I PREROUTING -t mangle -i $INTIF.5 -j LOG --log-ip-options --log-prefix "PREROUTING (mangle):"
-#iptables -I PREROUTING -t nat -i $INTIF.5 -j LOG --log-ip-options --log-prefix "PREROUTING (nat):"
-
-
-echo "   Enabling SNAT (MASQUERADE) functionality on $EXTIF"
-bash_exec "iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE"
-
-echo -e "\nrc.firewall-iptables v$FWVER done.\n"
-iptables  -t mangle -nvL
-iptables  -t filter -nvL
-
diff --git a/openair-cn/SCRIPTS/start_router.nord.eur.bash b/openair-cn/SCRIPTS/start_router.nord.eur.bash
deleted file mode 100644
index e71ba6dae73e83a336f0f298e2cb4e1645b1be0c..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_router.nord.eur.bash
+++ /dev/null
@@ -1,249 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-#
-# The location of the iptables and kernel module programs
-#
-#   If your Linux distribution came with a copy of iptables,
-#   most likely all the programs will be located in /sbin.  If
-#   you manually compiled iptables, the default location will
-#   be in /usr/local/sbin
-#
-# ** Please use the "whereis iptables" command to figure out
-# ** where your copy is and change the path below to reflect
-# ** your setup
-#
-IPTABLES=/sbin/iptables
-DEPMOD=/sbin/depmod
-MODPROBE=/sbin/modprobe
-
-###########################################################
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-###########################################################
-
-#Setting the EXTERNAL and INTERNAL interfaces for the network
-#
-
-EXTIF="eth0"
-INTIF="eth2"
-echo "   External Interface:  $EXTIF"
-echo "   Internal Interface:  $INTIF"
-
-echo -en "   loading modules: "
-
-# Need to verify that all modules have all required dependencies
-#
-echo "  - Verifying that all kernel modules are ok"
-$DEPMOD -a
-
-echo "----------------------------------------------------------------------"
-
-#Load the main body of the IPTABLES module - "iptable"
-#  - Loaded automatically when the "iptables" command is invoked
-#
-#  - Loaded manually to clean up kernel auto-loading timing issues
-#
-echo -en "ip_tables, "
-$MODPROBE ip_tables
-
-
-#Load the IPTABLES filtering module - "iptable_filter"
-#  - Loaded automatically when filter policies are activated
-
-
-#Load the stateful connection tracking framework - "ip_conntrack"
-#
-# The conntrack  module in itself does nothing without other specific
-# conntrack modules being loaded afterwards such as the "ip_conntrack_ftp"
-# module
-#
-#  - This module is loaded automatically when MASQ functionality is
-#    enabled
-#
-#  - Loaded manually to clean up kernel auto-loading timing issues
-#
-echo -en "ip_conntrack, "
-$MODPROBE ip_conntrack
-
-
-#Load the FTP tracking mechanism for full FTP tracking
-#
-# Enabled by default -- insert a "#" on the next line to deactivate
-#
-echo -en "ip_conntrack_ftp, "
-$MODPROBE ip_conntrack_ftp
-
-
-#Load the IRC tracking mechanism for full IRC tracking
-#
-# Enabled by default -- insert a "#" on the next line to deactivate
-#
-echo -en "ip_conntrack_irc, "
-$MODPROBE ip_conntrack_irc
-
-
-#Load the general IPTABLES NAT code - "iptable_nat"
-#  - Loaded automatically when MASQ functionality is turned on
-#
-#  - Loaded manually to clean up kernel auto-loading timing issues
-#
-echo -en "iptable_nat, "
-$MODPROBE iptable_nat
-
-
-#Loads the FTP NAT functionality into the core IPTABLES code
-# Required to support non-PASV FTP.
-#
-# Enabled by default -- insert a "#" on the next line to deactivate
-#
-echo -en "ip_nat_ftp, "
-$MODPROBE ip_nat_ftp
-
-#Clearing any previous configuration
-#
-#  Unless specified, the defaults for INPUT and OUTPUT is ACCEPT
-#    The default for FORWARD is DROP (REJECT is not a valid policy)
-#
-#   Isn't ACCEPT insecure?  To some degree, YES, but this is our testing
-#   phase.  Once we know that IPMASQ is working well, I recommend you run
-#   the rc.firewall-*-stronger rulesets which set the defaults to DROP but
-#   also include the critical additional rulesets to still let you connect to
-#   the IPMASQ server, etc.
-#
-echo "   Clearing any existing rules and setting default policy.."
-bash_exec "iptables -P INPUT ACCEPT"
-bash_exec "iptables -F INPUT"
-bash_exec "iptables -P OUTPUT ACCEPT"
-bash_exec "iptables -F OUTPUT"
-bash_exec "iptables -P FORWARD ACCEPT"
-bash_exec "iptables -F FORWARD"
-bash_exec "iptables -t nat -F"
-bash_exec "iptables -t mangle -F"
-bash_exec "iptables -t filter -F"
-bash_exec "iptables -t raw -F"
-
-bash_exec "ip route flush cache"
-
-
-echo "   Enabling forwarding"
-bash_exec "sysctl -w net.ipv4.ip_forward=1"
-assert "  `sysctl -n net.ipv4.ip_forward` -eq 1" $LINENO
-
-# Dynamic IP users:
-#
-#   If you get your IP address dynamically from SLIP, PPP, or DHCP,
-#   enable this following option.  This enables dynamic-address hacking
-#   which makes the life with Diald and similar programs much easier.
-#
-echo "   Enabling DynamicAddr.."
-bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
-assert "  `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
-
-bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-
-echo "   Disabling reverse path filtering"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-bash_exec "sysctl -w net.ipv4.conf.all.rp_forward=0"
-assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$EXTIF.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.$EXTIF.rp_filter` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$INTIF.rp_filter=0"
-assert "  `sysctl -n net.ipv4.conf.$INTIF.rp_filter` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$EXTIF.rp_forward=0"
-assert "  `sysctl -n net.ipv4.conf.$EXTIF.rp_forward` -eq 0" $LINENO
-bash_exec "sysctl -w net.ipv4.conf.$INTIF.rp_forward=0"
-assert "  `sysctl -n net.ipv4.conf.$INTIF.rp_forward` -eq 0" $LINENO
-
-
-echo "0" > /proc/sys/net/ipv4/conf/all/proxy_arp
-echo "1" > /proc/sys/net/ipv4/conf/$EXTIF/proxy_arp
-echo "1" > /proc/sys/net/ipv4/conf/$INTIF/proxy_arp
-
-echo "   FWD: Allow all connections OUT and only existing and related ones IN"
-bash_exec "iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT"
-bash_exec "iptables -A FORWARD -i $INTIF -o $EXTIF -m state --state NEW,ESTABLISHED,RELATED,INVALID -j ACCEPT"
-
-bash_exec "modprobe 8021q"
-
-for i in 5 6 7 8 9 10 11 12 13 14 15
-do
-    bash_exec "vconfig rem $INTIF.$i"
-    sync
-    bash_exec "vconfig add $INTIF $i"
-    sync
-    NET=$(( $i + 200 ))
-    CIDR='10.0.'$NET'.1/8'
-    bash_exec "ip -4 addr add $CIDR broadcast 192.174.$NET.255 dev $INTIF.$i"
-    bash_exec "iptables -A FORWARD -i $EXTIF -o $INTIF.$i -m state --state ESTABLISHED,RELATED -j ACCEPT"
-    bash_exec "iptables -A FORWARD -i $INTIF.$i -o $EXTIF -m state --state NEW,ESTABLISHED,RELATED,INVALID -j ACCEPT"
-    bash_exec "echo 1 > /proc/sys/net/ipv4/conf/$INTIF.$i/proxy_arp"
-    bash_exec "echo 0 > /proc/sys/net/ipv4/conf/$INTIF.$i/rp_forward"
-    bash_exec "echo 0 > /proc/sys/net/ipv4/conf/$INTIF.$i/rp_filter"
-    assert "  `sysctl -n net.ipv4.conf.$INTIF.$i.proxy_arp` -eq 1" $LINENO
-    assert "  `sysctl -n net.ipv4.conf.$INTIF.$i.rp_forward` -eq 0" $LINENO
-    assert "  `sysctl -n net.ipv4.conf.$INTIF.$i.rp_filter` -eq 0" $LINENO
-done
-for i in 5 6 7 8 9 10 11 12 13 14 15
-do
-    bash_exec "iptables  -t mangle -A PREROUTING -i $INTIF.$i -j CONNMARK --restore-mark"
-    bash_exec "iptables  -t mangle -A PREROUTING -i $INTIF.$i -m mark --mark 0 -j MARK --set-mark $i"
-    bash_exec "iptables  -t mangle -A PREROUTING -i $INTIF.$i -j CONNMARK --save-mark"
-
-
-    fgrep  vlan$i /etc/iproute2/rt_tables
-    if [ $? -ne 0 ]
-    then
-        base=200
-        num=$(( $i + $base ))
-        echo "$num vlan$i" >>  /etc/iproute2/rt_tables
-        echo "Updating /etc/iproute2/rt_tables with table vlan$i id $num"
-    fi
-    ip rule del from all iif $EXTIF  fwmark $i table vlan$i > /dev/null
-    bash_exec "ip rule add iif $EXTIF fwmark $i table vlan$i"
-    bash_exec "ip route add default dev $INTIF.$i table vlan$i"
-done
-#bash_exec "iptables  -t mangle -A OUTPUT -m mark ! --mark 0 -j CONNMARK --save-mark"
-#iptables -I INPUT      -i $INTIF.5 -j LOG --log-ip-options --log-prefix "INPUT CHAIN:"
-#iptables -I FORWARD  -t mangle  -i $INTIF.5 -j LOG --log-ip-options --log-prefix "FORWARD CHAIN(mangle):"
-#iptables -I FORWARD  -t filter  -i $INTIF.5 -j LOG --log-ip-options --log-prefix "FORWARD CHAIN(filter):"
-#iptables -I PREROUTING -t raw -i $INTIF.5 -j LOG --log-ip-options --log-prefix "PREROUTING (raw):"
-#iptables -I PREROUTING -t mangle -i $INTIF.5 -j LOG --log-ip-options --log-prefix "PREROUTING (mangle):"
-#iptables -I PREROUTING -t nat -i $INTIF.5 -j LOG --log-ip-options --log-prefix "PREROUTING (nat):"
-
-
-echo "   Enabling SNAT (MASQUERADE) functionality on $EXTIF"
-bash_exec "iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE"
-
-echo -e "\nrc.firewall-iptables v$FWVER done.\n"
-iptables  -t mangle -nvL
-iptables  -t filter -nvL
-
diff --git a/openair-cn/SCRIPTS/start_spgw.bash b/openair-cn/SCRIPTS/start_spgw.bash
deleted file mode 100755
index ff6747864825b811013b6105c16439cf5d54257c..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/start_spgw.bash
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/bash
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-# start S+P-GW without configuring anything in networking
-
-###############################
-# Include misc functions
-###############################
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-source $THIS_SCRIPT_PATH/utils.bash
-
-echo "Starting S+P-GW on host $HOSTNAME"
-
-# Some file and executable checks
-check_for_root_rights
-check_epc_config
-check_for_sgw_executable
-
-###############################
-# Test reachability of MME
-###############################
-rm -f /tmp/source.txt
-cat $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf | tr -d " " > /tmp/source.txt
-source /tmp/source.txt
-
-# echo 'Testing reachability of S11 MME'
-# ping -c 1 $MME_IP_ADDRESS_FOR_S11_MME || { echo "MME_IP_ADDRESS_FOR_S11_MME=$MME_IP_ADDRESS_FOR_S11_MME does not respond to ping" >&2 ; exit ; }
-
-###############################
-# Test reachability of MME
-###############################
-
-#IP_ROUTER=`python -c 'import socket; print socket.gethostbyname("router.eur")'`
-#export MAC_ROUTER=`ip neigh show | grep $IP_ROUTER | cut -d ' '  -f5 | tr -d ':'`
-#echo_success "ROUTER MAC ADDRESS= $MAC_ROUTER"
-
-export MAC_ROUTER="000000000000"
-
-
-###############################
-# CREATE SGI VLANs
-###############################
-bash_exec "modprobe 8021q"
-
-for i in 5 6 7 8 9 10 11 12 13 14 15
-do
-    # create vlan interface
-    bash_exec "vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i"
-    sync
-    bash_exec "vconfig add $PGW_INTERFACE_NAME_FOR_SGI $i"
-    sync
-    # configure vlan interface
-    #CIDR=$NETWORK'.'$i'/24'
-    base=200
-    NET=$(( $i + $base ))
-    CIDR='10.0.'$NET'.2/8'
-    bash_exec "ip -4 addr add  $CIDR dev $PGW_INTERFACE_NAME_FOR_SGI.$i"
-    bash_exec "ip link set dev $PGW_INTERFACE_NAME_FOR_SGI.$i up"
-done
-
-bash_exec "ip link set $PGW_INTERFACE_NAME_FOR_SGI promisc on"
-
-# custom for hades
-ip r d default via 192.168.21.1 dev wlan0
-ip r d default via 192.168.21.1 dev wlan0
-pkill synergyc
-synergyc 192.168.12.17
-
-###############################
-echo 'starting SGW'
-###############################
-gdb --args $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/oai_sgw -c $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf
diff --git a/openair-cn/SCRIPTS/utils.bash b/openair-cn/SCRIPTS/utils.bash
deleted file mode 100755
index 049daf9206260565b0c0fd79752065117070625b..0000000000000000000000000000000000000000
--- a/openair-cn/SCRIPTS/utils.bash
+++ /dev/null
@@ -1,681 +0,0 @@
-################################################################################
-#   OpenAirInterface
-#   Copyright(c) 1999 - 2014 Eurecom
-#
-#    OpenAirInterface is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation, either version 3 of the License, or
-#    (at your option) any later version.
-#
-#
-#    OpenAirInterface is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with OpenAirInterface.The full GNU General Public License is
-#    included in this distribution in the file called "COPYING". If not,
-#    see <http://www.gnu.org/licenses/>.
-#
-#  Contact Information
-#  OpenAirInterface Admin: openair_admin@eurecom.fr
-#  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
-#
-#  Address      : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France.
-#
-################################################################################
-cidr2mask() {
-  local i mask=""
-  local full_octets=$(($1/8))
-  local partial_octet=$(($1%8))
-
-  for ((i=0;i<4;i+=1)); do
-    if [ $i -lt $full_octets ]; then
-      mask+=255
-    elif [ $i -eq $full_octets ]; then
-      mask+=$((256 - 2**(8-$partial_octet)))
-    else
-      mask+=0
-    fi
-    test $i -lt 3 && mask+=.
-  done
-
-  echo $mask
-}
-
-
-black='\E[30m'
-red='\E[31m'
-green='\E[32m'
-yellow='\E[33m'
-blue='\E[34m'
-magenta='\E[35m'
-cyan='\E[36m'
-white='\E[37m'
-reset_color='\E[00m'
-
-ROOT_UID=0
-E_NOTROOT=67
-
-HOSTNAME=$(hostname -f)
-
-trim ()
-{
-    echo "$1" | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'
-}
-
-trim2()
-{
-    local var=$@
-    var="${var#"${var%%[![:space:]]*}"}"   # remove leading whitespace characters
-    var="${var%"${var##*[![:space:]]}"}"   # remove trailing whitespace characters
-    echo -n "$var"
-}
-
-cecho()   # Color-echo
-# arg1 = message
-# arg2 = color
-{
-    local default_msg="No Message."
-    message=${1:-$default_msg}
-    color=${2:-$green}
-    echo -e -n "$color$message$reset_color"
-    echo
-    return
-}
-
-echo_error() {
-    local my_string=""
-    until [ -z "$1" ]
-    do
-        my_string="$my_string$1"
-        shift
-        done
-        cecho "$my_string" $red
-}
-
-echo_warning() {
-    local my_string=""
-    until [ -z "$1" ]
-    do
-        my_string="$my_string$1"
-        shift
-    done
-    cecho "$my_string" $yellow
-}
-
-echo_success() {
-    local my_string=""
-    until [ -z "$1" ]
-    do
-        my_string="$my_string$1"
-        shift
-    done
-    cecho "$my_string" $green
-}
-
-bash_exec() {
-    output=$($1 2>&1)
-    result=$?
-    if [ $result -eq 0 ]
-    then
-        echo_success "$1"
-    else
-        echo_error "$1: $output"
-    fi
-}
-
-extract() {
-    if [ -f $1 ] ; then
-        case $1 in
-            *.tar.bz2)    tar xvjf $1        ;;
-            *.tar.gz)     tar xvzf $1        ;;
-            *.bz2)        bunzip2  $1        ;;
-            *.rar)        unrar    $1        ;;
-            *.gz)         gunzip   $1        ;;
-            *.tar)        tar xvf  $1        ;;
-            *.tbz2)       tar xvjf $1        ;;
-            *.tgz)        tar xvzf $1        ;;
-            *.zip)        unzip    $1        ;;
-            *.Z)          uncompress $1      ;;
-            *.7z)         7z x     $1        ;;
-            *)            echo_error "'$1' cannot be extracted via >extract<" ; return 1;;
-        esac
-    else
-        echo_error "'$1' is not a valid file"
-        return 1
-    fi
-    return 0
-}
-
-rotate_log_file () {
-    if [ -f $1 ]; then
-        TIMESTAMP=`date +%Y-%m-%d.%Hh_%Mm_%Ss`
-        NEWLOGFILE=$1.$TIMESTAMP
-        mv $1 $NEWLOGFILE
-        cat /dev/null > $1
-        nohup gzip -f -9 $NEWLOGFILE &
-    fi
-}
-
-set_openair() {
- fullpath=`readlink -f $BASH_SOURCE`
-    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
-    openair_path=${fullpath%/targets/*}
-    openair_path=${openair_path%/openair-cn/*}
-    openair_path=${openair_path%/openair[123]/*}
-
-    export OPENAIR_DIR=$openair_path
-    export OPENAIR_HOME=$openair_path
-    export OPENAIR1_DIR=$openair_path/openair1
-    export OPENAIR2_DIR=$openair_path/openair2
-    export OPENAIR3_DIR=$openair_path/openair3
-    export OPENAIRCN_DIR=$openair_path/openair-cn
-    export OPENAIR_TARGETS=$openair_path/targets
-}
-
-wait_process_started () {
-    if  [ -z "$1" ]
-    then
-        echo_error "WAITING FOR PROCESS START: NO PROCESS"
-        return 1
-    fi
-    ps -C $1 > /dev/null 2>&1
-    while [ $? -ne 0 ]; do
-        echo_warning "WAITING FOR $1 START"
-        sleep 2
-        ps -C $1 > /dev/null 2>&1
-    done
-    echo_success "PROCESS $1 STARTED"
-    return 0
-}
-
-is_process_started () {
-    if  [ -z "$1" ]
-    then
-        echo_error "WAITING FOR PROCESS START: NO PROCESS"
-        return 1
-    fi
-    ps -C $1 > /dev/null 2>&1
-    if [ $? -ne 0 ]
-    then
-        echo_success "PROCESS $1 NOT STARTED"
-        return 1
-    fi
-    echo_success "PROCESS $1 STARTED"
-    return 0
-}
-
-assert() {
-    # If condition false
-    # exit from script with error message
-    E_PARAM_ERR=98
-    E_PARAM_FAILED=99
-
-    if [ -z "$2" ] # Not enought parameters passed.
-    then
-        return $E_PARAM_ERR
-    fi
-
-    lineno=$2
-    if [ ! $1 ]
-    then
-        echo "Assertion failed:  \"$1\""
-        echo "File \"$0\", line $lineno"
-        exit $E_ASSERT_FAILED
-    fi
-}
-
-test_command_install_lib() {
-  # usage: test_command_install_package searched_binary package_to_be_installed_if_binary_not_found optional_option_to_apt_get_install
-  if [ ! -f $1 ]; then
-      echo_warning "$2 seems to be not installed, trying..."
-      apt-get install $2 -y
-      if [ ! -f $1 ]; then
-          echo_error "$2 unavailable"
-          exit 1
-      fi
-  fi
-  echo_success "$1 available"
-}
-
-
-test_command_install_package() {
-  # usage: test_command_install_package searched_binary package_to_be_installed_if_binary_not_found optional_option_to_apt_get_install
-  if [ $# -eq 2 ]; then
-      command -v $1 >/dev/null 2>&1 || { echo_warning "Program $1 is not installed. Trying installing it." >&2; apt-get install $2 -y; command -v $1 >/dev/null 2>&1 || { echo_error "Program $1 is not installed. Aborting." >&2; exit 1; };}
-  else
-      if [ $# -eq 3 ]; then
-          command -v $1 >/dev/null 2>&1 || { echo_warning "Program $1 is not installed. Trying installing it (apt-get install $3 $2)." >&2; apt-get install $3 $2 -y; command -v $1 >/dev/null 2>&1 || { echo_error "Program $1 is not installed. Aborting." >&2; exit 1; };}
-      else
-          echo_success "test_command_install_package: BAD PARAMETER"
-          exit 1
-      fi
-  fi
-  echo_success "$1 available"
-}
-
-test_command_install_script() {
-  # usage: test_command_install_script searched_binary script_to_be_invoked_if_binary_not_found
-  command -v $1 >/dev/null 2>&1 || { echo_warning "Program $1 is not installed. Trying installing it." >&2; bash $2; command -v $1 >/dev/null 2>&1 || { echo_error "Program $1 is not installed. Aborting." >&2; exit 1; };}
-  echo_success "$1 available"
-}
-
-start_openswitch_daemon() {
-  rmmod -s bridge
-  if [[ -e "/lib/modules/`uname -r`/extra/openvswitch.ko" ]] ; then
-      bash_exec "insmod /lib/modules/`uname -r`/extra/openvswitch.ko" > /dev/null 2>&1
-  else
-      echo_error "/lib/modules/`uname -r`/extra/openvswitch.ko not found, exiting"
-      exit -1
-  fi
-  is_process_started "ovsdb-server"
-  if [ $? -ne 0 ]
-  then
-      ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,manager_options --pidfile --detach
-      wait_process_started "ovsdb-server"
-  fi
-  # To be done after installation
-  # ovs-vsctl    --no-wait init
-  is_process_started "ovs-vswitchd"
-  if [ $? -ne 0 ]
-  then
-      ovs-vswitchd --pidfile --detach
-      wait_process_started "ovs-vswitchd"
-  fi
-}
-
-stop_openswitch_daemon() {
-    pkill ovs-vswitchd
-    pkill ovsdb-server
-    sync
-    if  ! is_process_started ovs-vswitchd  ; then
-        pkill -9 ovs-vswitchd
-    fi
-    if ! is_process_started ovsdb-server ; then
-        pkill -9 ovsdb-server
-    fi
-    rmmod -f openvswitch
-}
-
-check_epc_config() {
-    if [ ! -f $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf ]
-    then
-    echo "Cannot find file $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/epc_$HOSTNAME.conf"
-        echo "Please make sure to create one that fits your use (you can use mme_default.conf file as template)"
-        exit -1
-    fi
-}
-
-check_enb_config() {
-    if [ ! -f $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/enb_$HOSTNAME.conf ]
-        then
-        echo "Cannot find file $OPENAIR3_DIR/OPENAIRMME/UTILS/CONF/enb_$HOSTNAME.conf"
-        echo "Please make sure to create one that fits your use (you can use mme_default.conf file as template)"
-        exit -1
-        fi
-}
-
-check_for_epc_executable() {
-    if [ ! -f $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/oai_epc ]
-        then
-        echo "Cannot find oai_epc executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAI_EPC/"
-        echo "Please make sure you have compiled OAI EPC with --enable-standalone-epc option"
-        exit -1
-        fi
-}
-
-check_for_sgw_executable() {
-    if [ ! -f $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/oai_sgw ]
-    then
-        echo "Cannot find oai_sgw executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/"
-        echo "Please make sure you have compiled OAI EPC without --enable-standalone-epc option"
-        exit -1
-    fi
-}
-
-check_for_mme_executable() {
-    if [ ! -f $OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/oaisim_mme ]
-    then
-        echo "Cannot find oai_sgw executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAISIM_MME/"
-        echo "Please make sure you have compiled OAI EPC without --enable-standalone-epc option"
-        exit -1
-    fi
-}
-
-check_for_root_rights() {
-    if [[ $EUID -ne 0 ]]; then
-        echo "This script must be run as root" 1>&2
-        exit -1
-    fi
-}
-
-clean_openvswitch_network(){
-    ##################################################
-    # del bridge between eNB and MME/SPGW
-    ##################################################
-    bash_exec "tunctl -d $ENB_INTERFACE_NAME_FOR_S1_MME"
-    bash_exec "tunctl -d $ENB_INTERFACE_NAME_FOR_S1U"
-    bash_exec "tunctl -d $MME_INTERFACE_NAME_FOR_S1_MME"
-    bash_exec "tunctl -d $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
-    bash_exec "tunctl -d $MME_INTERFACE_NAME_FOR_S11_MME"
-    bash_exec "tunctl -d $SGW_INTERFACE_NAME_FOR_S11"
-    bash_exec "ovs-vsctl del-br       $BRIDGE"
-
-    stop_openswitch_daemon
-}
-
-build_openvswitch_network() {
-    start_openswitch_daemon
-    # REMINDER:
-    #                                                                           hss.eur
-    #                                                                             |
-    #        +-----------+          +------+              +-----------+           v   +----------+
-    #        |  eNB      +------+   |  ovs | VLAN 1+------+    MME    +----+      +---+   HSS    |
-    #        |           |cpenb0+------------------+cpmme0|           |    +------+   |          |
-    #        |           +------+   |bridge|       +------+           +----+      +---+          |
-    #        |           |upenb0+-------+  |              |           |               +----------+
-    #        |           +------+   |   |  |              +-+-------+-+
-    #        |           |          |   |  +----------------| s11mme|---+
-    #        |           |          |   |                   +---+---+   |
-    #        |           |          |   |             (optional)|       |
-    #        +-----------+          |   |                   +---+---+   |
-    #                               +---|------------------ | s11sgw|---+        router.eur
-    #                                   |                 +-+-------+-+              |   +--------------+
-    #                                   |                 |  S+P-GW   |              v   |   ROUTER     |
-    #                                   |  VLAN2   +------+           +-------+     +----+              +----+
-    #                                   +----------+upsgw0|           |sgi    +-...-+    |              |    +---...Internet
-    #                                              +------+           +-------+     +----+              +----+
-    #                                                     |           |      11 VLANS    |              |
-    #                                                     +-----------+   ids=[5..15]    +--------------+
-    #
-    ##################################################
-    # build bridge between eNB and MME/SPGW
-    ##################################################
-    bash_exec "tunctl -t $ENB_INTERFACE_NAME_FOR_S1_MME"
-    bash_exec "tunctl -t $ENB_INTERFACE_NAME_FOR_S1U"
-    bash_exec "tunctl -t $MME_INTERFACE_NAME_FOR_S1_MME"
-    bash_exec "tunctl -t $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP"
-    bash_exec "tunctl -t $MME_INTERFACE_NAME_FOR_S11_MME"
-    bash_exec "tunctl -t $SGW_INTERFACE_NAME_FOR_S11"
-
-    bash_exec "ovs-vsctl add-br       $BRIDGE"
-    bash_exec "ovs-vsctl add-port     $BRIDGE $ENB_INTERFACE_NAME_FOR_S1_MME        tag=1"
-    bash_exec "ovs-vsctl add-port     $BRIDGE $MME_INTERFACE_NAME_FOR_S1_MME        tag=1"
-    bash_exec "ovs-vsctl add-port     $BRIDGE $ENB_INTERFACE_NAME_FOR_S1U           tag=2"
-    bash_exec "ovs-vsctl add-port     $BRIDGE $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP tag=2"
-    bash_exec "ovs-vsctl add-port     $BRIDGE $MME_INTERFACE_NAME_FOR_S11_MME       tag=3"
-    bash_exec "ovs-vsctl add-port     $BRIDGE $SGW_INTERFACE_NAME_FOR_S11           tag=3"
-
-    bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME promisc up"
-    bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S1_MME $MME_IP_ADDRESS_FOR_S1_MME netmask `cidr2mask $MME_IP_NETMASK_FOR_S1_MME` promisc up"
-    bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP promisc up"
-    bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP $SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP netmask `cidr2mask $SGW_IP_NETMASK_FOR_S1U_S12_S4_UP` promisc up"
-
-    bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME promisc up"
-    bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1_MME $ENB_IP_ADDRESS_FOR_S1_MME netmask `cidr2mask $ENB_IP_NETMASK_FOR_S1_MME` promisc up"
-    bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U promisc up"
-    bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U $ENB_IP_ADDRESS_FOR_S1U netmask `cidr2mask $ENB_IP_NETMASK_FOR_S1U` promisc up"
-
-    bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S11_MME promisc up"
-    bash_exec "ifconfig $MME_INTERFACE_NAME_FOR_S11_MME $MME_IP_ADDRESS_FOR_S11_MME netmask `cidr2mask $MME_IP_NETMASK_FOR_S11_MME` promisc up"
-    bash_exec "ifconfig $ENB_INTERFACE_NAME_FOR_S1U promisc up"
-    bash_exec "ifconfig $SGW_INTERFACE_NAME_FOR_S11 $SGW_IP_ADDRESS_FOR_S11 netmask `cidr2mask $SGW_IP_NETMASK_FOR_S11` promisc up"
-}
-
-test_openvswitch_network() {
-
-    ## TEST NETWORK BETWEEN ENB-MME-SP-GW
-    iperf  --bind $MME_IP_ADDRESS_FOR_S1_MME -u -s 2>&1  > /dev/null &
-    iperf  --bind $ENB_IP_ADDRESS_FOR_S1_MME -u --num 1K -c $MME_IP_ADDRESS_FOR_S1_MME 2>&1 | grep -i WARNING > /dev/null
-    if [ $? -eq 0 ]; then
-        echo_error "NETWORK ERROR CONFIGURATION (openvswitch) between ENB and MME S1"
-        pkill iperf 2>&1 > /dev/null
-        exit 1
-    else
-        echo_success "NETWORK TEST SUCCESS (openvswitch) between ENB and MME S1"
-
-    fi
-    pkill iperf 2>&1 > /dev/null
-
-    iperf  --bind $SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP -u -s 2>&1  > /dev/null &
-    iperf  --bind $ENB_IP_ADDRESS_FOR_S1U -u --num 1K -c $SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP 2>&1 | grep -i WARNING > /dev/null
-    if [ $? -eq 0 ]; then
-        echo_error "NETWORK ERROR CONFIGURATION (openvswitch) between ENB and S-GW S1-U"
-        pkill iperf 2>&1 > /dev/null
-        exit 1
-    else
-        echo_success "NETWORK TEST SUCCESS (openvswitch) between ENB and S-GW S1-U"
-    fi
-    pkill iperf 2>&1 > /dev/null
-
-    iperf  --bind $SGW_IP_ADDRESS_FOR_S11 -u -s 2>&1  > /dev/null &
-    iperf  --bind $MME_IP_ADDRESS_FOR_S11_MME -u --num 1K -c $SGW_IP_ADDRESS_FOR_S11 2>&1 | grep -i WARNING > /dev/null
-    if [ $? -eq 0 ]; then
-        echo_error "NETWORK ERROR CONFIGURATION (openvswitch) between MME and S-GW S11"
-        pkill iperf 2>&1 > /dev/null
-        exit 1
-    else
-        echo_success "NETWORK TEST SUCCESS (openvswitch) between MME and S-GW S11"
-    fi
-    pkill iperf 2>&1 > /dev/null
-    return 0
-}
-
-build_epc_network() {
-
-    cat $OPENAIRCN_DIR/$OBJ_DIR/Makefile | grep CFLAGS\ \=\  | grep DENABLE_USE_NETFILTER_FOR_SGI
-    if [ $? -ne 0 ]
-    then
-        export ENABLE_USE_NETFILTER_FOR_SGI=0
-    else
-        export ENABLE_USE_NETFILTER_FOR_SGI=1
-    fi
-
-    cat $OPENAIRCN_DIR/$OBJ_DIR/Makefile | grep CFLAGS\ \=\  | grep DENABLE_USE_RAW_FOR_SGI
-    if [ $? -ne 0 ]
-    then
-        export ENABLE_USE_RAW_FOR_SGI=0
-    else
-        export ENABLE_USE_RAW_FOR_SGI=1
-    fi
-
-    build_openvswitch_network
-
-    ping -c 1 router.eur > /dev/null || { echo "router.eur does not respond to ping" >&2 ; exit ; }
-    IP_ROUTER=`python -c 'import socket; print socket.gethostbyname("router.eur")'`
-    export MAC_ROUTER=`ip neigh show | grep $IP_ROUTER | cut -d ' '  -f5 | tr -d ':'`
-    echo_success "ROUTER MAC ADDRESS= $MAC_ROUTER"
-
-    if [ $ENABLE_USE_NETFILTER_FOR_SGI -eq 1 ]; then
-
-        bash_exec "modprobe nf_conntrack"
-        bash_exec "modprobe nf_conntrack_ftp"
-
-        ######################################################
-        # PREROUTING
-        ######################################################
-        # We restore the mark following the CONNMARK mark. In fact, it does a simple MARK=CONNMARK
-        # where MARK is the standard mark (usable by tc)
-        # In French: Cette option de cible restaure le paquet marqué dans la marque de connexion
-        # comme défini par CONNMARK. Un masque peut aussi être défini par l'option --mask.
-        # Si une option mask est placée, seules les options masquées seront placées.
-        # Notez que cette option de cible n'est valide que dans la table mangle.
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -j CONNMARK --restore-mark"
-
-        # TEST bash_exec "$IPTABLES -t mangle -A PREROUTING -m mark --mark 0 -i $PGW_INTERFACE_NAME_FOR_SGI -j MARK --set-mark 15"
-        # We set the mark of the initial packet as value of the conntrack mark for all the packets of the connection.
-        # This mark will be restore for the other packets by the first rule of POSTROUTING --restore-mark).
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -j CONNMARK --save-mark"
-
-
-        ######################################################
-        # POSTROUTING
-        ######################################################
-
-        # MARK=CONNMARK
-        bash_exec "iptables -A POSTROUTING -t mangle -o tap0 -j CONNMARK --restore-mark"
-        # If we’ve got a mark no need to get further[
-        bash_exec "iptables -A POSTROUTING -t mangle -o tap0 -m mark ! --mark 0 -j ACCEPT"
-
-        #bash_exec "iptables -A POSTROUTING -p tcp --dport 21 -t mangle -j MARK --set-mark 1"
-        #bash_exec "iptables -A POSTROUTING -p tcp --dport 80 -t mangle -j MARK --set-mark 2"
-
-        # We set the mark of the initial packet as value of the conntrack mark for all the packets
-        # of the connection. This mark will be restore for the other packets by the first rule
-        # of POSTROUTING (–restore-mark).
-        bash_exec "iptables -A POSTROUTING -t mangle -j CONNMARK --save-mark"
-
-        bash_exec "iptables -A PREROUTING  -t mangle -j CONNMARK --restore-mark"
-
-        # We restore the mark following the CONNMARK mark.
-        # In fact, it does a simple MARK=CONNMARK where MARK is the standard mark (usable by tc)
-        #bash_exec "$IPTABLES -A OUTPUT -t mangle -m mark ! --mark 0 -j CONNMARK --restore-mark"
-
-        # If we’ve got a mark no need to get further[1]
-        #TEST bash_exec "$IPTABLES -A OUTPUT -t mangle -p icmp -j MARK --set-mark 14"
-        #bash_exec "$IPTABLES -A OUTPUT -t mangle -m mark ! --mark 0 -j ACCEPT"
-
-
-        # We set the mark of the initial packet as value of the conntrack mark for all the packets of the connection.
-        # This mark will be restore for the other packets by the first rule of OUTPUT (–restore-mark).
-        #bash_exec "$IPTABLES -A OUTPUT -t mangle -j CONNMARK --save-mark"
-
-
-
-
-        ######################################################
-        # NETFILTER QUEUE
-        ######################################################
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 5 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 6 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 7 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 8 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 9 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 10 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 11 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 12 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 13 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 14 -j NFQUEUE --queue-num 1"
-        bash_exec "$IPTABLES -t mangle -A PREROUTING -i $PGW_INTERFACE_NAME_FOR_SGI -m connmark  --mark 15 -j NFQUEUE --queue-num 1"
-
-        #echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables #To disable Iptables in the bridge.
-        #Raw table: Some years ago appeared a new tables in Iptables.
-        #This table can be used to avoid packets (connection really) to enter the NAT table:
-        # iptables -t raw -I PREROUTING -i BRIDGE -s x.x.x.x -j NOTRACK.
-
-
-
-
-        #bash_exec "$IPTABLES -t nat -A POSTROUTING -o $PGW_INTERFACE_NAME_FOR_SGI -j SNAT --to-source $PGW_IP_ADDR_FOR_SGI"
-    else
-        # # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
-        #IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
-
-        #NETWORK=`echo $IP_ADDR | cut -d . -f 1,2,3`
-
-        bash_exec "modprobe 8021q"
-
-        for i in 5 6 7 8 9 10 11 12 13 14 15
-        do
-            # create vlan interface
-            bash_exec "vconfig rem $PGW_INTERFACE_NAME_FOR_SGI.$i" > /dev/null 2>&1
-            sync
-            bash_exec "vconfig add $PGW_INTERFACE_NAME_FOR_SGI $i"
-            sync
-            # configure vlan interface
-            #CIDR=$NETWORK'.'$i'/24'
-            base=200
-            NET=$(( $i + $base ))
-            CIDR='10.0.'$NET'.2/8'
-            bash_exec "ip -4 addr add  $CIDR dev $PGW_INTERFACE_NAME_FOR_SGI.$i"
-        done
-    fi
-
-
-    bash_exec "ip link set $PGW_INTERFACE_NAME_FOR_SGI promisc on"
-
-    ##################################################
-    # build bridge between SPGW and Internet
-    ##################################################
-
-    # # get ipv4 address from PGW_INTERFACE_NAME_FOR_SGI
-    # IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | awk '/inet addr/ {split ($2,A,":"); print A[2]}' | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}'`
-    # if [ $IP_ADDR ]; then
-    #   bash_exec "ip -4 addr del $IP_ADDR dev $PGW_INTERFACE_NAME_FOR_SGI"
-    # fi
-    #
-    # # remove all ipv6 address from PGW_INTERFACE_NAME_FOR_SGI
-    # IP_ADDR="not empty"
-    # until [ "$IP_ADDR"x == "x" ]; do
-    #   IP_ADDR=`ifconfig $PGW_INTERFACE_NAME_FOR_SGI | grep 'inet6' | head -1 | tr '\n' ' ' | sed -n '1h;1!H;${;g;s/^[ \t]*//g;s/[ \t]*$//g;p;}' | cut -d ' ' -f3`
-    #   if [ $IP_ADDR ]; then
-    #     bash_exec "ip -6 addr del $IP_ADDR dev $PGW_INTERFACE_NAME_FOR_SGI"
-    #   fi
-    # done
-}
-
-test_epc_network() {
-    # Get MAC address of router.eur
-    ping -c 1 hss.eur > /dev/null || { echo "hss.eur does not respond to ping" >&2 ; exit ; }
-    ping -c 1 router.eur > /dev/null || { echo "router.eur does not respond to ping" >&2 ; exit ; }
-    test_openvswitch_network
-}
-
-clean_epc_network() {
-    bash_exec "modprobe tun"
-    bash_exec "modprobe ip_tables"
-    bash_exec "modprobe iptable_nat"
-    bash_exec "modprobe x_tables"
-
-    bash_exec "$IPTABLES -P INPUT ACCEPT"
-    bash_exec "$IPTABLES -F INPUT"
-    bash_exec "$IPTABLES -P OUTPUT ACCEPT"
-    bash_exec "$IPTABLES -F OUTPUT"
-    bash_exec "$IPTABLES -P FORWARD ACCEPT"
-    bash_exec "$IPTABLES -F FORWARD"
-    bash_exec "$IPTABLES -t raw    -F"
-    bash_exec "$IPTABLES -t nat    -F"
-    bash_exec "$IPTABLES -t mangle -F"
-    bash_exec "$IPTABLES -t filter -F"
-
-    bash_exec "ip route flush cache"
-
-    echo "   Disabling forwarding"
-    bash_exec "sysctl -w net.ipv4.ip_forward=0"
-    assert "  `sysctl -n net.ipv4.ip_forward` -eq 0" $LINENO
-
-    echo "   Enabling DynamicAddr.."
-    bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
-    assert "  `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
-
-    bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
-    assert "  `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
-
-
-    echo "   Disabling reverse path filtering"
-    bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
-    assert "  `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
-    clean_openvswitch_network
-}
-
-###########################################################
-IPTABLES=/sbin/iptables
-THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
-declare -x OPENAIR_DIR=""
-declare -x OPENAIR1_DIR=""
-declare -x OPENAIR2_DIR=""
-declare -x OPENAIR3_DIR=""
-declare -x OPENAIRCN_DIR=""
-declare -x OPENAIR_TARGETS=""
-###########################################################
-
-set_openair
-cecho "OPENAIR_DIR     = $OPENAIR_DIR" $green
-cecho "OPENAIR1_DIR    = $OPENAIR1_DIR" $green
-cecho "OPENAIR2_DIR    = $OPENAIR2_DIR" $green
-cecho "OPENAIR3_DIR    = $OPENAIR3_DIR" $green
-cecho "OPENAIRCN_DIR   = $OPENAIRCN_DIR" $green
-cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green