diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c
index 698882b38a6471dd037a3b70a54c3e9a9d7e7cc5..10f467874a89cb9b148dd4ab60358ffb470fa2e1 100644
--- a/targets/RT/USER/lte-softmodem.c
+++ b/targets/RT/USER/lte-softmodem.c
@@ -329,15 +329,6 @@ time_stats_t softmodem_stats_rx_sf[10]; // total rx time
void reset_opp_meas(void);
void print_opp_meas(void);
int transmission_mode=1;
-/*
- FT: not a very clean way of managing the rescale of iqs in rx path, but this is done in
- openair1/PHY/MODULATION/ul_7_5_kHz.c which doesn't have access to config parameters
- to re-worked later.....
- RX_IQRESCALELEN is setup in device libraries for all non expressmimo targets and acessed as an
- external variable in ul_7_5_kHz.c. For expressmimo it is a macro (openair1/PHY/defs.h)
- Regarding the value of this variable or macro: 18 is for 15 bits iqs, 15 is used for USRP, EXMIMO
-*/
-//int rxrescale;
int16_t glog_level = LOG_INFO;
int16_t glog_verbosity = LOG_MED;
@@ -482,7 +473,6 @@ void help (void) {
printf(" -h provides this help message!\n");
printf(" -K Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n");
printf(" -m Set the maximum downlink MCS\n");
- printf(" -M Specify whether RF head is local or remote,valid options: (1: local , 2:remote) \n");
printf(" -O eNB configuration file (located in targets/PROJECTS/GENERIC-LTE-EPC/CONF\n");
printf(" -q Enable processing timing measurement of lte softmodem on per subframe basis \n");
printf(" -r Set the PRB, valid values: 6, 25, 50, 100 \n");
@@ -1000,29 +990,12 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB)
if (tx_offset>=(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->lte_frame_parms.samples_per_tti))
tx_offset -= LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->lte_frame_parms.samples_per_tti;
- // ((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0] = ((short*)dummy_tx_b)[2*i]<<openair0_cfg[0].iq_txshift ;
-
- // ((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1] = ((short*)dummy_tx_b)[2*i+1]<<openair0_cfg[0].iq_txshift;
-
-
-
- ((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0]=
-#ifdef EXMIMO
- ((short*)dummy_tx_b)[2*i]<<4;
-#elif OAI_BLADERF
- ((short*)dummy_tx_b)[2*i];
-#else
- ((short*)dummy_tx_b)[2*i]<<4;
-#endif
- ((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1]=
-#ifdef EXMIMO
- ((short*)dummy_tx_b)[2*i+1]<<4;
-#elif OAI_BLADERF
- ((short*)dummy_tx_b)[2*i+1];
-#else
- ((short*)dummy_tx_b)[2*i+1]<<4;
-#endif
+ ((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0] = ((short*)dummy_tx_b)[2*i]<<openair0_cfg[0].iq_txshift;
+
+ ((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1] = ((short*)dummy_tx_b)[2*i+1]<<openair0_cfg[0].iq_txshift;
+ printf("dddddddddddddddddddddd%d\n\n\n\n",openair0_cfg[0].iq_txshift);
+
}
// if S-subframe switch to RX in second subframe
if (subframe_select(&phy_vars_eNB->lte_frame_parms,subframe) == SF_S) {
@@ -1921,14 +1894,16 @@ static void* eNB_thread( void* arg )
// USRP_DEBUG is active
rt_sleep_ns(1000000);
#endif
- /* FT configurable tx lauch delay (in slots )*/
+ /* FT configurable tx lauch delay (in slots): txlaunch_wait, txlaunch_wait_slotcount is device specific and
+ set in the corresponding library (with txlaunch_wait=1 and txlaunch_wait_slotcount=1 the check is as it previously was) */
+ /* old check:
+ if ((frame>50) &&
+ (tx_launched == 0) &&
+ (rx_pos >= (((2*hw_subframe)+1)*PHY_vars_eNB_g[0][0]->lte_frame_parms.samples_per_tti>>1))) {*/
if ( (frame>50) && (tx_launched == 0) &&
((openair0_cfg[card].txlaunch_wait == 0) ||
((openair0_cfg[card].txlaunch_wait == 1) &&
- (rx_pos >= (((2*hw_subframe)+openair0_cfg[card].txlaunch_wait_slotcount)*PHY_vars_eNB_g[0][0]->lte_frame_parms.samples_per_tti>>1))))) {
- /* if ((frame>50) &&
- (tx_launched == 0) &&
- (rx_pos >= (((2*hw_subframe)+1)*PHY_vars_eNB_g[0][0]->lte_frame_parms.samples_per_tti>>1))) {*/
+ (rx_pos >= (((2*hw_subframe)+openair0_cfg[card].txlaunch_wait_slotcount)*PHY_vars_eNB_g[0][0]->lte_frame_parms.samples_per_tti>>1))))) {
tx_launched = 1;
@@ -2222,12 +2197,7 @@ static void get_options (int argc, char **argv)
case LONG_OPTION_DUMP_FRAME:
mode = rx_dump_frame;
- break;
-
- case 'M':
- local_remote_radio=atoi(optarg);
- break;
-
+ break;
case 'A':
timing_advance = atoi (optarg);
break;
@@ -3001,11 +2971,6 @@ int main( int argc, char **argv )
for (card=0; card<MAX_CARDS; card++) {
-#ifdef EXMIMO
-/* FT: for all other devices the iq_txshift value is setup in the device library */
- openair0_cfg[card].iq_txshift=4;
-#endif
-
if(frame_parms[0]->N_RB_DL == 100) {
if (frame_parms[0]->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
@@ -3151,10 +3116,6 @@ int main( int argc, char **argv )
}
}
- //for EXMIMO
- //openair0_cfg[0].iq_rxrescale=15; /* default value if build with EXMIMO */
- //rxrescale=openair0_cfg[0].iq_rxrescale; /* see comments near RX_IQRESCALELEN definition */
-
printf("Done\n");
mac_xface = malloc(sizeof(MAC_xface));